• Journal of Plant Biotechnology
• /
• v.32 no.4
• /
• pp.233-241
• /
• 2005

Plants have considerable advantages for the production of antigenic proteins because they provide an inexpensive source of protein and an easy administration of vaccine. Since a publication describing edible plant vaccine of HBsAg in 1992, a number of laboratories around the world have studied the use of plants as the bioreactor to produce antigenic proteins of human or animal pathogens. Over the last ten years, these works have been mainly focused on three major strategies for the production of antigenic proteins in plants: stable genetic transformation of either the nuclear or plastid genome, or transient expression in plants using viral vectors. As many antigenic proteins have been expressed in tobacco, also several laboratories have succeeded to express genes encoding antigenic proteins in other crop plants: potato, tomato, maize, carrot, soybean and spinach. At present many works for the production of edible plant vaccine against bacteria-mediated diseases have mostly performed the studies of enterotoxins and adhesion proteins. Also the development of new-type antigens (pili, flagella, surface protein, other enterotoxin and exotoxin etc.) is required for various targets and more efficacy to immunize against microorganism pathogens. Many works mostly studied in experimental animals had good results, and phase I clinical trial of LTB clearly indicated its immunogenic ability. On the other hand, edible plant vaccines have still problems remained to be solved. In addition to the accumulation of sufficient antigen in plants, human health, environment and agriculture regulation should be proven. Also oral tolerance, the physiological response to food antigens and commensal flora is the induction of a state of specific immunological unresponsiveness, needs to be addressed before plant-derived vaccine becomes a therapeutic option.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.2 s.50
• /
• pp.526-541
• /
• 1995

This study was conducted to estimate the validity of reverse transcriptase-polymerase chain reaction(RT-PCR) compared to enzyme immunoassay(EIA) for the detection of hepatitis C virus (HCV) infection. EIA for antibody to HCV(anti-HCV) and RT-PCR for HCV was executed on the subjects from Pusan and Kyungnam area with questionnaire survey to collect some relating factors of HCV infection. As the result from 617 cases, the prevalence of HCV infection was 1.5% by EIA and 3.7% by RT-PCR(p<0.05), and the age standardized rate was 1.7% and 3.4% by EIA and RT-PCR, respectively. The prevalence of hepatitis B surface antigen(HBsAg) was 6.8% by enzyme linked immunosorbent assay(ELISA) and the age standardized rate was 7.7%. It was the higher in male group comparing to female group(p<0.01). Both of the prevalence of HCV and HBsAg were higher in elevated asparate aminotransferase(AST) and alanine aminotransferase (ALT) group than in normal AST and ALT group(p<0.01). There was no specific risk factor of HCV infection. Though the degree of agreement of EIA and RT-PCR by gamma statistics was 97.2%, it showed a significant difference between the two methods(p<0.01). For the detection of HCV infection, positive predictive value of EIA was 66.7% and negative predictive value of EIA was 97.2%. This study suggests that negative result to anti-HCV by EIA didn't mean the free state of HCV infection, therefore it would be helpful that further monitoring for HCV infection by RT-PCR in the case of elevated AST and ALT and/or clinically suspected.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.3
• /
• pp.83-92
• /
• 2004

A continuous monitoring of textural characteristics of surface sediments, sedimentation rates and beach profile was carried out to investigate the seasonal variations of sedimentary processes in the Imjado beach, southwestern coast of Korea for two years. The beach profiles consist of steep beach face and relatively flat middle and low tide beaches. The slope of the beach face increases in summer and decreases in winter, in good accordance with the standard beach cycle. Ridge and runnel systems are well developed in the middle and low tide beaches during the summer, but these structures are replaced by mega-ripples during the winter. The sediments are fining southward as well as landward. The mean grain-size tends to be increasingly coarser during seasons of autumn and winter on the north beach and during seasons of winter and spring on the south one. In addition, the sediments are eroded on the north beach and accumulated on the south one as a whole. These are probably due to southward transportation of the sediments as long-shore current (NE-SW) runs around the coastal line of the beach. However, the seasonal variations in accumulation rates are very complex and irregular. It is considered that the Imjado beach represents in non-equilibrium state, as a result of coastal and submarine topographic changes by artificial agents and sea-level uprising associated with global warming.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.474-478
• /
• 2007

Nanostructures of $SiN_x$ were made by bombardment of ionized $N_2$ on Si surface and subsequent annealing. Atomic force micrograph showed the density of $SiN_x$ nanostructures was $3\times10^{10}/cm^2$. Their lateral size and height were 40$\sim$60 nm and 15 nm, respectively. The chemical state of the nanostructure was measured using X-ray photoelectron spectroscopy, which changed from $SiN_x$ to $Si_3N_4\;+\;SiN_x$ as the bombarding ionized gas current increases. Upon annealing, transmission electron micrograph showed a clear evidence for crystalline Si phase formation inside the $SiN_x$ nanostructures. Photoluminescence peak observed at around 400nm was thought to be originated from the interface states between the nanocrystalline Si and surrounding $SiN_x$ nanostructures.

• Journal of Korea Water Resources Association
• /
• v.33 no.5
• /
• pp.551-559
• /
• 2000

In order to diagnose the water environment and assess the water quality restoration, long term trend of water environment has been surveyed at 3-R stations from 1994 to 1999 in Lake Shihwa. Annual mean values of $COD_{Mn}$, Chlorophyll a, total nitrogen, total phosphorus and Secchi depth are ranged in 5.2-15.1 mg/L, 7.3-14R.1 jlg/L, 1.50-4.84 mgN/L, 0.055-0.281 mgP/L and 0.5 -1.4 m, respectively, during the study periods. Carson's trophic state indeies were varied from mesotrophy in 1994 and 1995, hyper-eutrophy in 1996 and 1997, to meso eutrophy in 199R and 1999. After dike construction, water quality were rapidly deteriorated by allochthonous and autochthonous loading of high nutrients and organic carbon. Eutrophication phenomena were characterized by massive phytoplankton blooms and high concentration of COD. However, after onset of restoration program, lake water quality was rapidly restored to the level of just after sea-dike construction. The diversion of waste water inflowing from the Panwol and the Sihwa industrial districts which was started from March, 1997 has contributed to improve water quality in the surface layer. And the tidal mixing (sea water inflowing) through the continuous gate operation was the most effective measure to the whole lake restoration.ration.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.6
• /
• pp.526-530
• /
• 1994

This study was conducted to investigate photosynthetic response to four sequential air influx rate with rice(Oryza sativa L.)plants moved from a natural condition to constant condition with automatic regulation selected environmental variables on 13th~15th days after anthesis. In time course of photosynthetic response to increasing air influx rate(200-280-360-440 ml / min.), stomatal conductance decreased rapidly at the beginning after treatment and then oscillated with a free-running period of a approximately 1 hour to 1 hour 30 minutes until reached up to steady-state condition. Similar change was also observed $CO_2$ assimilation rate. Stomatal conductance decreased throughout the air influx rate sequence, but the rate of decrease was similar to the decrease in $CO_2$ assimilation rate observed under continuous air influx rate conditions. In starch granules during grain filling period under air influx rate(440 ml / min.) , compound starch granules were loosing and a number of hollows were observed in surface of single starch granules. Evidences from several approaches indicate that synchronization of stomatal conductance and$CO_2$ assimilation rate was closely inter-related tinder increase of air influx rate and increase of air influx rate influenced the$CO_2$ uptake in photosynthetic processes and compound starch granule, as 'end products' of photosynthesis.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.629-641
• /
• 2006

The Standing Buddha Statue in the Gwanchoksa temple consists of medium to coarse grained biotite granodiorite with dark grey color, and it has a week gneissosity along the pegmatite veins. The results of magnetic susceptibility and geochemical patterns of the host rock of Standing Buddha Statue and the basement rock suggest that both values are formed from the co-genetic magma with the same differentiation process. The CIAs of the basement rock and the Standing Buddha Statue are calculated to 51.43 and 50.86, and the WPIs are estimated 4.52 and 8.95, respectively. So the weathering potential from the host rock of Standing Buddha Statue and basement rock prove to be high. The Standing Buddha Statue is terribly damaged with physical weathering from deterioration and exfoliation, and are scattered with secondary pollutant and precipitate. Basement rock is also in danger of ground collapse because of irregularly developed discontinuity system. Most surface of Standing Buddha Statue is seriously discolored into yellowish brown and dark gray, or black precipitates are also formed. Moreover, it is heavily covered with crustose lichen, fungi and algae, or moss are also found. In order to control the influential factors with the complex deterioration of Standing Buddha Statue, it is needed to rearrange a site environments, and conservation scientific management is required to protect it from covering lichens, exfoliations and fractures.

• Economic and Environmental Geology
• /
• v.31 no.1
• /
• pp.11-20
• /
• 1998

The effects of the major cations ($Ca^{2+}$, $Mg^{2+}$, $K^+$, $Na^+$), complex-forming anions ($SO_4{^{2-}}$, $HCO_3{^-}$), and solution pH on the adsorption of $^{137}Cs$ and $^{90}Sr$ by kaolinite in groundwater chemistry were investigated. Three-dimensional Kd modelling designed by a statistical method was attempted to compare the relative effect among hydrated radii, charge and concentration of competing cations on the adsorption of Cs and Sr. The modelling results indicate that the hydrated radii of competing cations is the most important factor, and then their charges and concentrations are also important factors in order. The property of zeta potential of kaolinite particles was discussed in terms of the amphoteric reactions of a kaolinite surface affecting the adsorption of Cs and Sr. The ionic strength of competing cations on the adsorption of Cs and Sr exerts a greater effect than the solution pH. The sorption behaviour of Sr on kaolinite is also highly dependent on the concentration of bicarbonate. The speciation of Sr and the saturation state of a secondary phase were thermodynamically calculated by a computer program, WATEQ4F. This indicates that the change in solution pH with the concentration of bicarbonate and the precipitation of a strontianite ($SrCO_3$) are major factors controlling Sr adsorption behaviour in the presence of bicarbonate ion.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.11a
• /
• pp.7-7
• /
• 2001

The increasing interest in light weight materials coupled to the need for cost -effective processing have combined to create a significant opportunity for aluminum P/M. particularly in the automotive industry in order to reduce fuel emissions and improve fuel economy at affordable prices. Additional potential markets for Al PIM parts include hand tools. Where moving parts against gravity represents a challenge; and office machinery, where reciprocating forces are important. Aluminum PIM adds light weight, high compressibility. low sintering temperatures. easy machinability and good corrosion resistance to all advantages of conventional iron bm;ed P/rv1. Current commercial alloys are pre-mixed of either the AI-Si-Mg or AL-Cu-Mg-Si type and contain 1.5% ethylene bis-stearamide as an internal lubricant. The powder is compacted in closed dies at pressure of 200-500Mpa and sintered in nitrogen at temperatures between $580~630^{\circ}C$ in continuous muffle furnace. For some applications no further processing is required. although most applications require one or more secondary operations such as sizing and finishing. These sccondary operations improve the dimension. properties or appearance of the finished part. Aluminum is often considered difficult to sinter because of the presence of a stable surface oxide film. Removal of the oxide in iron and copper based is usually achieved through the use of reducing atmospheres. such as hydrogen or dissociated ammonia. In aluminum. this occurs in the solid st,lte through the partial reduction of the aluminum by magncsium to form spinel. This exposcs the underlying metal and facilitates sintering. It has recently been shown that < 0.2% Mg is all that is required. It is noteworthy that most aluminum pre-mixes contain at least 0.5% Mg. The sintering of aluminum alloys can be further enhanced by selective microalloying. Just 100ppm pf tin chnnges the liquid phase sintering kinetics of the 2xxx alloys to produce a tensile strength of 375Mpa. an increilse of nearly 20% over the unmodified alloy. The ductility is unnffected. A similar but different effect occurs by the addition of 100 ppm of Pb to 7xxx alloys. The lend changes the wetting characteristics of the sintering liquid which serves to increase the tensile strength to 440 Mpa. a 40% increase over unmodified aIloys. Current research is predominantly aimed at the development of metal matrix composites. which have a high specific modulus. good wear resistance and a tailorable coefficient of thermal expnnsion. By controlling particle clustering and by engineering the ceramic/matrix interface in order to enhance sintering. very attractive properties can be achicved in the ns-sintered state. I\t an ils-sintered density ilpproaching 99%. these new experimental alloys hnve a modulus of 130 Gpa and an ultimate tensile strength of 212 Mpa in the T4 temper. In contest. unreinforcecl aluminum has a modulus of just 70 Gpa.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2013

The rare earth oxide wastes consisting of major 8 nuclides Y, La, Ce, Pr, Nd, Sm, Eu and Gd, are generated during the salt waste treatment of PyroGreen process. The final form of the rare earth is generated as the oxide state. In this study, six candidate glasses were developed to evaluate the feasibility for vitrifying the rare earth oxide wastes within the borosilicate glass system. The solubilities of the mixture of the rare earth oxide waste showed less than 25wt% at $1,200^{\circ}C$, less than 30wt% at $1,300^{\circ}C$, respectively. It means that solubility is increased with the temperature increment. The liquidus temperature of the homogeneous glass with 20wt% waste loading was determined as less than $950^{\circ}C$. In more than solubility of rare earth oxides glass, formation of rare earth-oxide-silicate crystal in glass-ceramic occurred as the secondary phase. As their viscosity at melting temperature $1,200{\sim}1,300^{\circ}C$ was less than 100 poise, electrical conductivity was higher than 1 S/cm, 20~25wt% waste loading glasses with good surface homogeneity are judged to have good operability in cold crucible induction melter. Other physicochemical properties of the developed glasses are going to be experimented in the future.