• Computers and Concrete
• /
• 제22권4호
• /
• pp.407-417
• /
• 2018

Over the past three decades, self-compacting concrete (SCC), which is characterized by its superior rheological properties, has been gradually used in construction industry. It is now recognized that the application of SCC using supplementary cementitious materials (SCM) is highly attractive and promising technology reducing the environmental impact of the construction industry and reducing the higher materials costs. This paper presents an experimental study that investigated the mechanical and durability properties of SCCs manufactured with blended binders including fly ash, slag, and micro-silica. A total of 8 batches of SCCs were manufactured. As series of tests were conducted to establish the rheological properties, compressive strength, and durability properties including the water absorption, water permeability, rapid chloride permeability and initial surface absorption of the SCCs. The influences of the SCC strength grade, blended types and content on the properties of the SCCs are investigated. Unified reactive indices are proposed based on the mix proportion and the chemical composition of the corresponding binders are used to assess the compressive strength and strength development of the SCCs. The results also indicate the differences in the underlying mechanisms to drive the durability properties of the SCC at the different strength grades.

• 마이크로전자및패키징학회지
• /
• 제21권4호
• /
• pp.83-89
• /
• 2014

Solder paste plays a crucial role as the widely used joining material in surface mount technology (SMT). The understanding of its behaviour and properties is essential to ensure the proper functioning of the electronic assemblies. The composition of the solder paste is known to be directly related to its rheological behaviour. This paper provides a brief overview of the solder paste behaviour of four different solder paste formulations, stencil printing processes, and techniques to characterize solder paste behaviour adequately. The solder pastes are based on the Sn-3.0Ag-0.5Cu alloy, are different in their particle size, metal content and flux system. The solder pastes are characterized in terms of solder particle size and shape as well as the rheological characterizations such as oscillatory sweep tests, viscosity, and creep recovery behaviour of pastes.

• 한국광물학회지
• /
• 제16권1호
• /
• pp.33-47
• /
• 2003

국내산 벤토나이트의 유변학적 특성과 그 규제 요인을 파악하기 위해서 각종 응용광물학적분석과 체표면적, 입도분포, 팽윤도 및 점성도를 측정하였다. 비교적 저품위(몬모릴로나이트 함량:30∼75 wt%)를 이루는 국내산 Ca-형 벤토나이트들은 2∼4 $\mu\textrm{m}$의 입도를 갖고 대부분 반자형의 엽상 결정체를 이룬다. 현탁액 상에서 벤토나이트 광물성분들의 입도 분포는 대체로 10∼100 $\mu\textrm{m}$ 범위에서 높은 빈도를 보이고 전체적으로는 다소 복잡한 이중적인 분포양상을 나타낸다. 이 같은 양상은 제올라이트질 벤토나이트에서 보다 심하게 나타난다. 이 벤토나이트들의 EGME 체표면적은 $269∼735\m^2$/g의 값의 범위를 갖는 것으로 측정되었다 이 체표면적 값은 몬모릴로나이트의 함량, 수분함량 및 CEC 수치와 대체로 정비례하는 관계를 나타낸다. 제올라이트질 벤토나이트가 제올라이트를 함유하지 않는 것보다 전반적으로 약간 높은 체표면적 갈을 갖는다. 국내산 벤토나이트들은 전반적으로 낮은 팽윤도와 점성도를 나타낸다. 2∼5 wt%의 $Na_2$$CO_3$첨가에 의해서 유발된 국내산 벤토나이트들의 팽윤도 향상 최대치는 몬모릴로나이트의 함량과 불순물, 특히 제올라이트의 함유정도에 따라 250∼500%수준인 것으로 측정되었다. Na치환능력이 강한 제올라이트를 함유하는 벤토나이트의 팽윤도 향상에는 좀더 많은 양의 $Na_2$$CO_3$가 소요된다 점성도에 있어서는 장석의 함량이 높고 상대적으로 낮은 입도와 결정도를 갖는 벤토나이트들이 비교적 높은 수치를 보이는 경향이 있다. 또한 현탁액의 pH가 상대적으로 높은 수치를 보이는 시료들이 대체로 점성도가 높은 것으로 나타난다. 그렇지만 벤토나이트의 주요한 유변학적 특성들인 팽윤도와 점성도는 몬모릴로나이트의 함량이나 평균 분산입도와는 뚜렷한 일률적인 상관관계를 보이지 않는 것으로 나타난다. 이에 비해서 팽윤도는 벤토나이트의 광물조성, 표면전하 특성, 입도 및 형상 등의 물리화학적 성향을 포괄하는 체표면적 수치와 대략적으로 반비례적인 관계를 보인다 따라서 벤토나이트 현탁액에서의 유변학적 특성은 몬모릴로나이트의 표면전하 특성, 형태, 입도 및 조직 등의 차이에 의해서 달라지는 점토 입자들의 응집특성 및 취합결정체의 형상에 주로 규제되고, 제올라이트와 같은 미세한 불순 광물성분들의 영향도 부수적으로 관여되는 복합적인 성향인 것으로 해석된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1211-1219
• /
• 2001

The electro-rheological(ER) fluids for smart hydraulic system are a class of colloidal dispersion which exhibit large reversible Changes in their rheological behavior when they are subjected to external electrical fields. This paper presents experimental results on material properties of an ER fluids subjected to electrical fatigues. As a first step, ER fluid is made of methyl cellulose(MC) choosing 25% of particle weight-concentration. Following the construction of test mechanism for durability estimation, the dynamic yield shear stress and the current density for the ER fluids of MC component are experimentally distilled as a function of electric field. In addition, the surface roughness of the employed electrode are evaluated as a function of the number of the electric-field cycles.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.497-498
• /
• 2006

Tribological properties of a Magneto-Rheological(MR) fluid in a polishing process are studied. For this polishing process, abrasive wear model is proposed as a function of shear force, normal force and actual mean velocity of MR particles at workpiece surface. Experimental conditions are changed by varying the gap distance between workpiece and tool and the rotational speed of tool. From the experimental results, a modified Stribeck curve is obtained, and the friction coefficient turns out to have linear relationship with a modified Sommerfeld number. The validity of the wear model is supported by additional experiments performed for measuring material removal rates.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.133-134
• /
• 2006

In contrast to paints, the surface appearance of adhesive materials is of minor importance, because the adhesive is invisible between the two substrates. Therefore, the rheological properties needed to apply an adhesive dispersion by spray coating can be quite different. The influence of three different kinds of thickeners on the spraying behaviour of polyurethane adhesive dispersions was investigated. The associative thickener showed only minor changes, whereas the higher molecular weight soluble thickeners dramatically changed the spraying angle and the amount of overspray. Determination of the elongational viscosity by means of the CaBER rheometer proved to be of limited use for thickened dispersions.

• 한국인쇄학회지
• /
• 제28권2호
• /
• pp.45-56
• /
• 2010

The computer simulation is presented of gravure ink transferring behavior and penetration to the paper when an gravure roller is used to transfer a printing ink onto a substrate. The three dimensional unsteady ink motion is simulated by Polyflow package software and experimented by IGT gravure printing test machine. The simulation is performed where the flow domain is bounded above by a stress free surface and bounded below by a moving substrate. Specific predictions are made for particular pattern of cells and substrates. Cell size and ink rheological properties are found to be the principal determination of transferring behavior. Simulation is currently restricted to the flow domain beneath the receding meniscus. Both Newtonian and shear thinning inks are considered.

• 소성∙가공
• /
• 제12권1호
• /
• pp.3-10
• /
• 2003

The formation of surface defects associated with Jotting in injection molding is related to the geometries of cavity and fate, operational conditions and the rheological properties of polymer. In this study we have examined jetting phenomena in injection molding process for the throe kinds of PCs which have different molecular weights and structures, PBT and PC/ABS alloy with several injection speeds. We have used various cavity shapes those are tensile, flexural and impact test specimens with various gates and cavity thicknesses. Through this study we have observed that the jetting is related to the dic swell of material. This means that the jotting is strongly affected by the elastic flow property rather than the viscous flow property in viscoelastic characteristics of molten polymer. Different resins have different elastic properties, and elastic flow behavior depends on the shear rate of flow, i.e. injection speed. Large die swell would eliminate jetting however, the retardation of die swell would stimulate jetting. In the point of mole design, reducing the thickness ratio of cavity to gate can reduce or eliminate jetting regardless of amount of elasticity of polymer melt.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.125-131
• /
• 2002

Surface defects in injection molded parts are due to the unsteady flow of polymer melt which are related to the geometries of cavity and gate, the operational conditions of injection and the rheological properties of polymer. In this study we have examined jetting phenomena in injection molding process for three kinds of PCs which have different molecular weight and structure, PBT and PC/ABS alloy with several injection speeds. We have used various cavity shapes that are tensile, flexural and impact test specimens with various gate and cavity thicknesses. Through this study we have observed that the formation of surface defect associated with jetting during filling stage in injection molding is strongly related to die swell. This means that the jetting is strongly affected by the elastic property rather than the viscous property in viscoelastic characteristics of molten polymer. Large die swell would eliminate jetting however, the retardation of die swell would stimulate jetting. In the point of mold design, reducing the thickness ratio of cavity to gate can reduce or eliminate jetting and associated surface defects regardless of magnitude of elastic property. It also enlarges process window that can produce steady flow of polymer melt in injection molding.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.135-136
• /
• 2006

The shear flow properties have been reported in many cases by manufactures and fabricators. Only this characteristic is sometimes insufficient for the processings to provide a complete picture of the relationship between the processability and the flow behavior when underwent free-surface processes in which the shape and thickness of the extrudate are determined by the rheological properties of the melt, the die dimensions etc. In this paper the methodology of control of elongational flow is discussed in terms of relaxation time control of the polymer melts.