DOI QR코드

DOI QR Code

Mechanical and durability properties of self-compacting concrete with blended binders

  • Xie, T.Y. (School of Civil, Environmental and Mining Engineering, The University of Adelaide) ;
  • Elchalakani, M. (Faculty of Engineering and Mathematical Sciences, School of Engineering, The University of Western Australia) ;
  • Mohamed Ali, M.S. (School of Civil, Environmental and Mining Engineering, The University of Adelaide) ;
  • Dong, M.H. (Faculty of Engineering and Mathematical Sciences, School of Engineering, The University of Western Australia) ;
  • Karrech, A. (Faculty of Engineering and Mathematical Sciences, School of Engineering, The University of Western Australia) ;
  • Li, G. (Department of Chemical Engineering, University of Melbourne)
  • 투고 : 2018.02.16
  • 심사 : 2018.10.19
  • 발행 : 2018.10.25

초록

Over the past three decades, self-compacting concrete (SCC), which is characterized by its superior rheological properties, has been gradually used in construction industry. It is now recognized that the application of SCC using supplementary cementitious materials (SCM) is highly attractive and promising technology reducing the environmental impact of the construction industry and reducing the higher materials costs. This paper presents an experimental study that investigated the mechanical and durability properties of SCCs manufactured with blended binders including fly ash, slag, and micro-silica. A total of 8 batches of SCCs were manufactured. As series of tests were conducted to establish the rheological properties, compressive strength, and durability properties including the water absorption, water permeability, rapid chloride permeability and initial surface absorption of the SCCs. The influences of the SCC strength grade, blended types and content on the properties of the SCCs are investigated. Unified reactive indices are proposed based on the mix proportion and the chemical composition of the corresponding binders are used to assess the compressive strength and strength development of the SCCs. The results also indicate the differences in the underlying mechanisms to drive the durability properties of the SCC at the different strength grades.

키워드

참고문헌

  1. Almuwbber, O., Haldenwang, R., Mbasha, W. and Masalova, I. (2018), "The influence of variation in cement characteristics on workability and strength of SCC with fly ash and slag additions", Constr. Build. Mater., 160, 258-267. https://doi.org/10.1016/j.conbuildmat.2017.11.039
  2. ASTM International (1999), ASTM C 494-99. Standard Specification for Chemical Admixtures for Concrete, ASTM International, West Conshohocken, 4.
  3. ASTM International (2005), ASTM C39/C39M-05. Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken.
  4. ASTM International (2012), ASTM C618-12. Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, ASTM International, West Conshohocken.
  5. ASTM International (2013), ASTM C642-13. Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, ASTM International, West Conshohocken.
  6. ASTM International (2017), ASTM C1202-17a, Standard Test Method for Electrical Indication of Concrete‟s Ability to Resist Chloride Ion Penetration, ASTM International, West Conshohocken.
  7. Atis, C.D. and Bilim, C. (2007), "Wet and dry cured compressive strength of concrete containing ground granulated blast-furnace slag", Build. Environ., 42(8), 3060-3065. https://doi.org/10.1016/j.buildenv.2006.07.027
  8. Australian Standard (2000), AS 1478.1-2000. Chemical Admixtures for Concrete, Mortar and Grout Admixtures for Concrete, Standards Australia, Sydeny.
  9. Badogiannis, E., Kakali, G., Dimopoulou, G., Chaniotakis, E. and Tsivilis, S. (2005), "Metakaolin as a main cement constituent. Exploitation of poor Greek kaolins", Cement Concrete Compos., 27(2), 197-203. https://doi.org/10.1016/j.cemconcomp.2004.02.007
  10. Behim, M., Beddar, M. and Clastres, P. (2013), "Reactivity of granulated blast furnace slag", Slovak J. Civil Eng., 21(2), 7-14. https://doi.org/10.2478/sjce-2013-0007
  11. Benaicha, M., Roguiez, X., Jalbaud, O., Burtschell, Y. and Alaoui, A.H. (2015), "Influence of silica fume and viscosity modifying agent on the mechanical and rheological behavior of self compacting concrete", Constr. Build. Mater., 84, 103-110. https://doi.org/10.1016/j.conbuildmat.2015.03.061
  12. Bingol, A.F. and Tohumcu, I. (2013), "Effects of different curing regimes on the compressive strength properties of self compacting concrete incorporating fly ash and silica fume", Mater. Des., 51, 12-18. https://doi.org/10.1016/j.matdes.2013.03.106
  13. Binici, H. and Aksogan, O. (2006), "Sulfate resistance of plain and blended cement", Cement Concrete Compos.s, 28(1), 39-46. https://doi.org/10.1016/j.cemconcomp.2005.08.002
  14. Binici, H., Temiz, H. and Kose, M.M. (2007), "The effect of fineness on the properties of the blended cements incorporating ground granulated blast furnace slag and ground basaltic pumice", Constr. Build. Mater., 21(5), 1122-1128. https://doi.org/10.1016/j.conbuildmat.2005.11.005
  15. Bouzoubaa, N. and Lachemi, M. (2001), "Self-compacting concrete incorporating high volumes of class F fly ash: Preliminary results", Cement Concrete Res., 31(3), 413-420. https://doi.org/10.1016/S0008-8846(00)00504-4
  16. Chen, X. and Wu, S. (2013), "Influence of water-to-cement ratio and curing period on pore structure of cement mortar", Constr. Build. Mater., 38, 804-812. https://doi.org/10.1016/j.conbuildmat.2012.09.058
  17. Chen, Y.Y., Tuan, B.L.A. and Hwang, C.L. (2013), "Effect of paste amount on the properties of self-consolidating concrete containing fly ash and slag", Constr. Build. Mater., 47, 340-346. https://doi.org/10.1016/j.conbuildmat.2013.05.050
  18. Da Silva, P. and De Brito, J. (2015), "Experimental study of the porosity and microstructure of self-compacting concrete (SCC) with binary and ternary mixes of fly ash and limestone filler", Constr. Build. Mater., 86, 101-112. https://doi.org/10.1016/j.conbuildmat.2015.03.110
  19. Dadsetan, S. and Bai, J. (2017), "Mechanical and microstructural properties of self-compacting concrete blended with metakaolin, ground granulated blast-furnace slag and fly ash", Constr. Build. Mater., 146, 658-667. https://doi.org/10.1016/j.conbuildmat.2017.04.158
  20. Dave, N., Misra, A.K., Srivastava, A. and Kaushik, S. (2017), "Setting time and standard consistency of quaternary binders: The influence of cementitious material addition and mixing", Int. J. Sustain. Built Environ., 6(1), 30-36. https://doi.org/10.1016/j.ijsbe.2016.10.004
  21. Deilami, S., Aslani, F. and Elchalakani, M. (2017), "Durability assessment of self-compacting concrete with fly ash", Comput. Concrete, 19(5), 489-499. https://doi.org/10.12989/cac.2017.19.5.489
  22. El-Chabib, H. and Syed, A. (2012), "Properties of selfconsolidating concrete made with high volumes of supplementary cementitious materials", J. Mater. Civil Eng., 25(11), 1579-1586.
  23. Elchalakani, M., Aly, T. and Abu-Aisheh, E. (2014), "Sustainable concrete with high volume GGBFS to build Masdar City in the UAE", Case Stud. Constr. Mater., 1, 10-24. https://doi.org/10.1016/j.cscm.2013.11.001
  24. Elchalakani, M., Basarir, H. and Karrech, A. (2016), "Green concrete with high-volume fly ash and slag with recycled aggregate and recycled water to build future sustainable cities", J. Mater. Civil Eng., 29(2), 04016219.
  25. EN (1983), BS EN 1881-101, Testing Concrete. Method of Sampling Fresh Concrete on Site, British Standards Institution, London, United Kingdom.
  26. EN (2001), BS EN 934-2: Admixtures for Concrete, Mortar and Grout. Concrete Admixtures. Definitions, Requirements, Conformity, Marking and Labelling, British Standards Institution, London, United Kingdom.
  27. EN (2010), BS EN 12350-1, Testing Fresh Concrete. Self-Compacting Concrete. u- Box Test, British Standards Institution, London, United Kingdom.
  28. EN (2010), BS EN 12350-8,Testing Fresh Concrete. Self-Compacting Concrete. Slump-flow Test, British Standards Institution, London, United Kingdom.
  29. EN (2010), BS EN 12350-9, Testing Fresh Concrete. Self-Compacting Concrete. V-Funnel Test, British Standards Institution, London, United Kingdom.
  30. EN (2010), BS EN 12350-10, Testing Fresh Concrete. Self-Compacting Concrete. L Box Test, British Standards Institution, London, United Kingdom.
  31. Farhang, K. and Fathi, H. (2017), "Performance of concrete structures with a combination of normal SCC and fiber SCC", Comput. Concrete, 20(6), 655-661. https://doi.org/10.12989/CAC.2017.20.6.655
  32. Fathi, H. and Lameie, T. (2017), "Effect of aggregate type on heated self-compacting concrete", Comput. Concrete, 19(1), 33-39. https://doi.org/10.12989/cac.2017.19.1.033
  33. Gao, Y., De Schutter, G., Ye, G., Tan, Z. and Wu, K. (2014), "The ITZ microstructure, thickness and porosity in blended cementitious composite: Effects of curing age, water to binder ratio and aggregate content", Compos. Part B: Eng., 60, 1-13.
  34. Gesoglu, M., Guneyisi, E. and O zbay, E. (2009), "Properties of self-compacting concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume", Constr. Build. Mater., 23(5), 1847-1854. https://doi.org/10.1016/j.conbuildmat.2008.09.015
  35. Ghafari, E., Costa, H., Julio, E., Portugal, A. and Duraes, L. (2014), "The effect of nanosilica addition on flowability, strength and transport properties of ultra high performance concrete", Mater. Des., 59, 1-9. https://doi.org/10.1016/j.matdes.2014.02.051
  36. Hassan, A.A., Lachemi, M. and Hossain, K.M. (2012), "Effect of metakaolin and silica fume on the durability of selfconsolidating concrete", Cement Concrete Compos., 34(6), 801-807. https://doi.org/10.1016/j.cemconcomp.2012.02.013
  37. Jalal, M., Pouladkhan, A., Harandi, O.F. and Jafari, D. (2015), "Comparative study on effects of Class F fly ash, nano silica and silica fume on properties of high performance self compacting concrete", Constr. Build. Mater., 94, 90-104. https://doi.org/10.1016/j.conbuildmat.2015.07.001
  38. Jawahar, J.G., Sashidhar, C., Reddy, I.R. and Peter, J.A. (2013), "Design of cost-effective M 25 grade of self compacting concrete", Mater. Des., 49, 687-692. https://doi.org/10.1016/j.matdes.2013.01.078
  39. Jawahar, J.G., Sashidhar, C., Reddy, I.R. and Peter, J.A. (2013), "Micro and macrolevel properties of fly ash blended self compacting concrete", Mater. Des., 46, 696-705. https://doi.org/10.1016/j.matdes.2012.11.027
  40. Kadri, E.H. and Duval, R. (2009), "Hydration heat kinetics of concrete with silica fume", Constr. Build. Mater., 23(11), 3388-3392. https://doi.org/10.1016/j.conbuildmat.2009.06.008
  41. Khan, A., Do, J. and Kim, D. (2016), "Cost effective optimal mix proportioning of high strength self compacting concrete using response surface methodology", Comput. Concrete, 17(5), 629-638. https://doi.org/10.12989/cac.2016.17.5.629
  42. Khan, M.I. and Siddique, R. (2011), "Utilization of silica fume in concrete: Review of durability properties", Resour. Conserv. Recycl., 57, 30-35. https://doi.org/10.1016/j.resconrec.2011.09.016
  43. Le, H.T. and Ludwig, H.M. (2016), "Effect of rice husk ash and other mineral admixtures on properties of self-compacting high performance concrete", Mater. Des., 89, 156-166. https://doi.org/10.1016/j.matdes.2015.09.120
  44. Lian, C., Zhuge, Y. and Beecham, S. (2011), "The relationship between porosity and strength for porous concrete", Constr. Build. Mater., 25(11), 4294-4298. https://doi.org/10.1016/j.conbuildmat.2011.05.005
  45. Liu, M. (2010), "Self-compacting concrete with different levels of pulverized fuel ash", Constr. Build. Mater., 24(7), 1245-1252. https://doi.org/10.1016/j.conbuildmat.2009.12.012
  46. Long, G., Gao, Y. and Xie, Y. (2015), "Designing more sustainable and greener self-compacting concrete", Constr. Build. Mater., 84, 301-306. https://doi.org/10.1016/j.conbuildmat.2015.02.072
  47. Nikbin, I., Beygi, M., Kazemi, M., Amiri, J.V., Rabbanifar, S., Rahmani, E. and Rahimi, S. (2014), "A comprehensive investigation into the effect of water to cement ratio and powder content on mechanical properties of self-compacting concrete", Constr. Build. Mater., 57, 69-80. https://doi.org/10.1016/j.conbuildmat.2014.01.098
  48. Ponikiewski, T. and Golaszewski, J. (2014), "The influence of high-calcium fly ash on the properties of fresh and hardened self-compacting concrete and high performance self-compacting concrete", J. Clean. Prod., 72, 212-221. https://doi.org/10.1016/j.jclepro.2014.02.058
  49. Rama, K.J., Sivakumar, M., Vasan, A., Kubair, S. and Murthy, R.A. (2017), "Plastic viscosity based mix design of selfcompacting concrete with crushed rock fines", Comput. Concrete, 20(4), 461-468.
  50. Sabet, F.A., Libre, N.A. and Shekarchi, M. (2013), "Mechanical and durability properties of self consolidating high performance concrete incorporating natural zeolite, silica fume and fly ash", Constr. Build. Mater., 44, 175-184. https://doi.org/10.1016/j.conbuildmat.2013.02.069
  51. Scrivener, K.L., Crumbie, A.K. and Laugesen, P. (2004), "The interfacial transition zone (ITZ) between cement paste and aggregate in concrete", Interf. Sci., 12(4), 411-421. https://doi.org/10.1023/B:INTS.0000042339.92990.4c
  52. Sethy, K.P., Pasla, D. and Sahoo, U.C. (2016), "Utilization of high volume of industrial slag in self compacting concrete", J. Clean. Prod., 112, 581-587. https://doi.org/10.1016/j.jclepro.2015.08.039
  53. Struble, L. and Tebaldi, G. (2017), "Materials for sustainable infrastructure", Proceedings of the 1st GeoMEast International Congress and Exhibition, Egypt.
  54. Turk, K., Karatas, M. and Gonen, T. (2013), "Effect of fly ash and silica fume on compressive strength, sorptivity and carbonation of SCC", KSCE J. Civil Eng., 17(1), 202-209. https://doi.org/10.1007/s12205-013-1680-3
  55. Uysal, M. and Sumer, M. (2011), "Performance of self-compacting concrete containing different mineral admixtures", Constr. Build. Mater., 25(11), 4112-4120. https://doi.org/10.1016/j.conbuildmat.2011.04.032
  56. Vakhshouri, B. and Nejadi, S. (2017), "Compressive strength and mixture proportions of self-compacting light weight concrete", Comput. Concrete, 19(5), 555-566. https://doi.org/10.12989/cac.2017.19.5.555
  57. Wongkeo, W., Thongsanitgarn, P., Ngamjarurojana, A. and Chaipanich, A. (2014), "Compressive strength and chloride resistance of self-compacting concrete containing high level fly ash and silica fume", Mater. Des., 64, 261-269. https://doi.org/10.1016/j.matdes.2014.07.042
  58. Xie, T. and Ozbakkaloglu, T. (2016), "Behavior of recycled aggregate concrete-filled basalt and carbon FRP tubes", Constr. Build. Mater., 105, 132-143. https://doi.org/10.1016/j.conbuildmat.2015.12.068
  59. Xie, T. and Visintin, P. (2018), "A unified approach for mix design of concrete containing supplementary cementitious materials based on reactivity Moduli", J. Clean Prod., 203, 68-82. https://doi.org/10.1016/j.jclepro.2018.08.254
  60. Yazici, H. (2008), "The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze-thaw resistance of self-compacting concrete", Constr. Build. Mater., 22(4), 456-462. https://doi.org/10.1016/j.conbuildmat.2007.01.002
  61. Yudenfreund, M., Odler, I. and Brunauer, S. (1972), "Hardened portland cement pastes of low porosity I. Materials and experimental methods", Cement Concrete Res., 2(3), 313-330. https://doi.org/10.1016/0008-8846(72)90073-7
  62. Zhang, M., Tam, C. and Leow, M. (2003), "Effect of water-tocementitious materials ratio and silica fume on the autogenous shrinkage of concrete", Cement Concrete Res., 33(10), 1687-1694. https://doi.org/10.1016/S0008-8846(03)00149-2
  63. Zhao, H., Sun, W., Wu, X. and Gao, B. (2015), "The properties of the self-compacting concrete with fly ash and ground granulated blast furnace slag mineral admixtures", J. Clean. Prod., 95, 66-74. https://doi.org/10.1016/j.jclepro.2015.02.050