• Journal of The Korean Society of Integrative Medicine
• /
• v.11 no.4
• /
• pp.51-60
• /
• 2023

Purpose : The purpose of this study was to determine the effect of pelvic floor muscle exercise (PFME) on an unstable support surface on maximal inspiratory pressure (MIP), maximum expiratory pressure (MEP), and abdominal muscle thickness as a method for effective PFME. Methods : This study was performed on 22 subjects. They were matched and divided into two groups based on body mass index; the experimental group (EG) performed PFME on a foam roller (n= 11), the control group (CG) performed PFME on a stable support surface (n= 11). Kegel exercise was performed with 10 seconds of contraction, 10 seconds of relaxation, and 4 sets of 10 reps per set. Both of group executed the exercise 3 times a week for 2 weeks. MIP and MEP was measured using a spirometer. Abdominal muscle thickness was measured using ultrasound. The paired t-test was used to compare difference on each group and the comparison between groups was analyzed using the independent t-test. A significance level of α= .05 was used to verify statistical significance. Results : The EG showed a significant increase in the MEP (p<.05). The CG showed a significant increase in the MEP (p<.05). There was no significant difference in the two groups (p>.05). The EG showed a significant increase in the external oblique, internal oblique and transverse abdominis (p<.05). The CG showed a significant increase in the internal oblique (p<.05). There was no significant difference in the two groups (p>.05). Conclusion : Based on the results of this study, additional research should be conducted to correct the limitations of this study to confirm that PFME performed on a foam roller has a positive effect on respiratory muscle strength and abdominal muscle thickness.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.2
• /
• pp.300-307
• /
• 1997

The effects of Aster scaber and Ixeris dentata on cadiovascular system in hyperlipidemic rats were examined. Five groups of thirty Sprague Dawley rats were fed with the diet contained 1% cholesterol, 0.25% sodium cholate, 10% coconut oil and 5% lard(control group) for 4 weeks. Each experimental diet group was added with 5% plant powder or extract of the 5% plant powder by dry weight. Contractile or relaxation responses in the isolated artria and thoracic aortae were measured and the morphological changes of the aortic endotherium from the rats fed the experimental diet were inspected. In response to isoproterenol, the number of right atrial spontaneous beat was significantly lower in Cham chyi powder group$(PP_{1})$ and Sumbagui powder group$(PP_{2})$ than control at $10^(-8)M$ concentration. The contraction forces by injection of phenylephrine and calcium in isolated thoracic aorta were significantly low in each experimental groups compared with the control. The relaxation rates by acetylcholine represented comparatively higher value in $PP_{1}$ than control. The morphological changes of endothelial cell surface was a little in $PP_{1}$ and $PP_{2}$ compared with control, while the damages were considerably advanced in Cham chyi and Sumgbagui extract diet group$(PE_{1},\;PE_{2})$.

• Archives of Plastic Surgery
• /
• v.34 no.5
• /
• pp.587-592
• /
• 2007

Purpose: In case of postburn flexion contracture of the fingers, skin graft, geometrical relaxation techniques, local flap, and free flap have been used. Among these procedures, full-thickness skin grafts from the inguinal area are widely used to reconstruct a postburn flexion contracture in the fingers. But there are many esthetic and functional problems in this procedure. Especially, hyperpigmentation of the skin-grafted fingers poses a troublesome problem, particularly in the patients who have dark colored skin. To solve the problem, we have used pulp graft which was harvested from the lateral aspect of great toe. In the present study, we report pulp graft, with which we have obtained a good result in the treatment of postburn flexion contracture of the fingers. Methods: Between September of 2004 and August of 2006, great toe pulp graft was performed to 20 sites of 15 patients. After release of the postburn flexion contracture using Z-plasty, the composite tissue (pulp) harvested from the lateral aspect of great toe was grafted on the raw surface. Moisture dressing with ointment and foam dressing material was performed. Stratum corneum of the graft got stripped off in two to four weeks after pulp graft. The color of the pulp graft was slightly reddish, then it became similar to the adjacent tissue. Results: There was complete take in all the patients who were treated with pulp graft. Great toe pulp graft provided similar color and texture to the adjacent skin, high rate of graft take, and left only a minimal scar at donor site. Conclusion: Thick keratin layer and inelastic nature of the pulp make this type of the graft much easier and simpler, and ensure a better take. Pulp graft is useful method for the reconstruction of the postburn flexion contracture in fingers.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.09a
• /
• pp.233-241
• /
• 2004

A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces strictly related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.09a
• /
• pp.211-219
• /
• 2004

A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces stric시y related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials. In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

• Journal of Biomedical Engineering Research
• /
• v.22 no.3
• /
• pp.249-257
• /
• 2001

The voluntary contracted EMG signal of spinal cord injured patients is very small because the information from central nervous system is not sufficiently transmitted to $\alpha$ motor neuron or muscle fiber. Therefore the acquisited EMG signal from needle or surface electrodes can not be identified obvious voluntary contraction pattern by muscle movement. In this paper we propose the extraction technique of voluntary muscle contraction and relaxation pattern from EMG signal of spinal cord injured patient whose EMG signal is composed of the linear sum of mo색 unit action potentials with two noise sources, additive noise assumed to be white Gaussian noise and high frequency discharge assumed to be not motor unit action potential but impulsive noise. In order to eliminate impulsive noise and additive noise from voluntary contracted EMG signal, we use the FatBear filter which is a nonarithmetic piecewise constant filter, and multiscale nonlinear wavelet denoising processing, respectively. The proposed technique is applied to the EMG signal acquisited from transverse myelitis patients to extract voluntary muscle contraction pattern.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.135-135
• /
• 2003

The fast evolution in the fold of optical communication systems demands powerful optical information treatment. These functions can be performed by integrated optical systems. A key component of such systems is erbium doped waveguide amplifier(EDWA). The intra 4f radiative transition of Er at 1.5 $\mu\textrm{m}$ is particularly interesting because this wavelength is standard in optical telecommunications. The fabrication of waveguide amplifier for integrated optics using sol-gel process has received an increasing attention. Potential advantage of lower cost by less capital equipment and easy processing makes this process an attractive alternatives to conventional technologies like flame hydrolysis deposition, ion exchange and chemical vapor deposition, etc. In addition, sol-gel process has been found to be extremely suitable for the control of composition and refractive index related directly with optical properties. The main drawback of such an amplifier with respect to the EDWA is the need for a much higher Er3+ concentration to compensate for the smaller interaction length. However, the high doping of Er might be resulted in the non-radiative relaxation by clustering of Er ions End co-operative upconversion. In order to solve this problem, we investigate the possibility of avoiding short Er-Er distances by encapsulation of Er3+ ions in hosts such as organic-inorganic hybrid materials. For inorganic-organic hybrid sols, methacryloxypropyltrimethoxysilane (MPTS), zirconyl chloride octahydrate and erbium(III) chloride hexahydrate were used as starting materials, followed by conventional sol-gel process. It was observed by TEM that nano sols having core/shell toplology were formed, depending on the mole ratio of Zr/Er. The surface roughness for the coatings on Si substrate was investigated by AFM as a function of Zr/Er ratio. The local environment and vibrational Properties of Er3+ ions were studied using Near-IR, FT-IR, and UV/Vis spectroscopy. Nano hybrid coatings derived from polymer and Er doped encapsulation Eave the good luminescence at 1.55$\mu\textrm{m}$.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.153-158
• /
• 2005

The turbulent shear flaw around a surface-mounted vertical wall was investigated using the two-frame PIV(CACTUS 3.1) system. From this study, it is revealed that at least 500 instantaneous velocity field data are required for ensemble average to get reliable turbulence statistics, but only 200 field data are sufficient for the time-averaged mean velocity information The flow has an unsteady recirculation region post vertical wall with bottom gap, followed by a slow relaxation to the fiat-plate boundary layer flow. The time-averaged reattachment length estimated from the streamline distribution is about x/H=3H. The large eddy structure in the separated shear layer seems to have signification influence on the development of the separated shear layer and the reattachment process.

• Korean Journal of Materials Research
• /
• v.15 no.3
• /
• pp.166-171
• /
• 2005

Fe-6Al-9Si(N) alloy powders were synthesized by hybrid process of chemical nitrification and mechanical milling. The nitriding treatment on Fe-6Al-9Si alloy powders formed $\gamma'-Fe_4N$ phase on the powders surface. The nitriding-treated powders were pulverized by horizontal high-energy ball milling machine. The longer ball milling time tended to reduce the size of alloy powders. In ball milling for 36h, extremely fine powders with about $7\~9wt\%$ nitrogen were obtained. Through X-ray diffraction analysis on the powders, it was found out that the longer milling time caused a disappearance of the crystallinity of $\alpha-Fe$ in the powders. TEM study confirmed that the powders is comprised of a few tens nano-meter sized crystals, including $\alpha-Fe$ phase with partially $\gamma'-Fe_4N$ phase. Hysteresis curves of the synthesized powders measured by VSM revealed lower saturation magnetization and higher coercivity, which seemed to be attributed to nitrogen-impregnation and severe residual stress developed during the high energy milling. Microstructure observation on the powder annealed at 873 K for 1 h showed 10 to 20 nm sized $\alpha-Fe$ crystal. Such a enhanced crystallinity significantly increased the magnetization and decreased the coercivity, which was attributed to not only the crystallinity but also residual stress relaxation.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.8 no.2
• /
• pp.57-71
• /
• 2002

Cervical pain is a rapid increase that is owing to a flexion-extension whiplash injury, unappropriated posture, chronical repetition injury from abdominal position of head and neck, excessive repeating work, chronical deficiency of excercise. Because of that is bring about muscle unbalance, tightness of cervical extensor muscle, weakness of cervical deep flexor muscles, instability of cervical region and reduction of proprioceptive sensor. Recent the role of muscle is more emphasized for preservation of sine stabilization. And cognition of integrated muscular system, importance for the operation and relation is increased to maintain stability of the motor system and pertinent function. Therefore we are going to introduce the sling exercise and stabilization exercise method for advanced efficient of cervical and upper limb and for the muscle strengthening to importance cervical stabilization through neurological program as control the reaction of cervical stabilization. Sling exercise therapy(SET) concept consists of a system of diagnosis and treatment. The system of diagnosis involves testing the muscle's tolerance through progressive loading in open and close kinetic chains. The SET system contains elements such as relaxation, increasing the range of movement, traction, training the stabilizing musculature, sensory-motor exercises, training in open and close kinetic chains, dynamic training of the mobilizing musculature, cardiovascular exercise, group exercise, personal exercise at home Sensory-motor training is an essential element of the SET concept. The emphasis is on closed kinetic chain exercise on an unstable surface, there by achieving optimum stimulation of the sensory-motor apparatus.