• Fire Science and Engineering
• /
• v.28 no.4
• /
• pp.97-103
• /
• 2014

To ensure adequate protection from the risk of burns, fire fighter's turnout has a composite of more than three components and air gaps between layers of materials. During the flame exposure, radiation and convection heat transfer occurs in the air gap, thus the air gap acts as a thermal resistance with non-linear characteristics. Therefore, in this study, the experiments were performed to identify the effect of various air gap width (0~7 mm) on the thermal protective performance of fire fighter's clothing. The temperatures on each layer and RPP (Radiant Protective Performance, the most effective index representing the thermal protective performance) were measured with various incident radiant heat fluxes. The temperature at the rear surface of the garment decreased and RPP increased with increasing air gap width because the thermal resistance increased. Especially, it could be found that RPP value and air gap width has almost linear relation for the constant incident heat flux conditions. Thus relatively simple RPP predictive equation was suggested for various incident heat flux and air gap conditions.

• Research in Plant Disease
• /
• v.17 no.3
• /
• pp.399-401
• /
• 2011

Stem rot of Stachys sieboldii occurred sporadically in the farmer's fields at Shindeung-myeon, Sancheonggun, Gyeongnam province in Korea. The infected leaves and stems are water-soaked, rotted, wilted and finally leads to the death of the whole plants. The sclerotia, 1-3 mm, white to brown, globoid, were formed on lesions and the surface of soil line. The optimum temperature for mycelial growth and sclerotia formation was $30^{\circ}C$ on potato dextrose agar. The typical clamp connections were observed in the hyphae of the fungus. On the basis of mycological characteristics and pathogenicity to host plants, this fungus was identified as Sclerotium rolfsii Saccardo. This is the first report of stem rot on S. sieboldii caused by S. rolfsii in Korea.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.684-695
• /
• 2010

Geographic information system (GIS) is being increasingly used for decision making, planning and agricultural environment management because of its analytical capacity. GIS and remote sensing have been combined with environmental models for many agricultural applications on monitoring of soils, agricultural water quality, microbial activity, vegetation and aquatic insect distribution. This paper introduce principles, vegetation indices, spatial data structure, spatial analysis of GIS and remote sensing in agricultural applications including terrain analysis, soil erosion, and runoff potential. National Academy of Agricultural Science (NAAS), Rural Development Administration (RDA) has a spatial database of agricultural soils, surface and underground water, weeds, aquatic insect, and climate data, and established a web-GIS system providing spatial and temporal variability of agricultural environment information since 2007. GIS-based interactive mapping system would encourage researchers and students to widely utilize spatial information on their studies with regard to agricultural and environmental problem solving combined with other national GIS database. GIS and remote sensing will play an important role to support and make decisions from a national level of conservation and protection to a farm level of management practice in the near future.

• Journal of Chest Surgery
• /
• v.21 no.6
• /
• pp.970-978
• /
• 1988

There is tendency of increasing number and decreasing age of patients who are indicated for Rastelli operation for their cyanotic congenital heart disease. So there is the need to find the criterion which saves the patients from early postoperative hemodynamic disturbances. We reviewed the 26 patients who had been performed Rastelli operation at Seoul national University Hospital from January 1981 to June 1988. mean age of the patients was 7.8*3.4 years[range 2.5-15years], mean body surface area[BSA] 0.79*0.25m2[range 0.49-1.51m2] and mean hematocrit 57.95*12%[range 48-80%]. We divided these patients into survived group and died group before postoperative 72 hours, and analyzed preoperative arterial oxygen saturation[SaO2], the ratio of diameter of right pulmonary artery to ascending aorta[RPA/AA], the ratio of both right and left pulmonary artery diameter to descending thoracic aorta[RPA+LPA/DTA], pulmonary artery index[PA index], cardiopulmonary bypass time, aorta cross-clamping time, postoperative perfusion state and total amount of dopamine infused postoperatively. The results showed that RPA+LPA/DTA and PA index were statistically significant factors to influence early postoperative cardiac death rate[P< 0.05]. Especially there were good linear correlations between PA index[X] and peripheral perfusion index[Y][Y= - 1.15+0.02 X, r=0.86, P<0.01]and between PA index[X] and total amount of dopamine infused before postoperative 72 hours[mg/kg, Y][Y=61.94 - 0.15 X, r=-0.80, P < 0.01]. Also there were tendencies that the higher RPA+LPA/DTA[Y], the better peripheral perfusion [X] and the lower need of dopamine[X], but no statistical significance.[Y=0.78+1.60 X, r =0. 49, P >0.05] And the discriminate analysis showed that patients with PA index over 221 mm2/BSA could undergo correction with 25 per cent of error rate. In conclusion, early postoperative hemodynamic states could be predicted by preoperatively measured PA index, and which can be used as a criterion for Rastelli operation performed on cyanotic congenital heart disease.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.691-698
• /
• 1997

The risk assessment model for dam and levee is applied to a river where two adjacent dams are located in the upstream of the watershed. "A" dam is proven to be safe with 200-year precipitation and unsafe with PMP condition, whereas "B" dam to be safe with 200-year precipitation and PMP condition. The computed risk considering the uncertainties of the runoff coefficient. initial water depth and relevant data of the dam and spillway turn out to be equivalent results in Monte-Carlo and AFOSM method. In levee risk model, this study addresses the uncertainty of water surface elevation by Manning's equation. Monte-Carlo simulation with the variations of Manning's roughness coefficient is calculated by assuming that it follows atriangular distribution. The model can be used for preparing flood risk maps, flood warning systems, and establishing nation's flood disaster protection plan.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.1
• /
• pp.32-38
• /
• 2011

Galvanized steel has gone through a chemical process to keep it from corroding. The steel gets coated in layers of zinc because rust will not attack this protective metal. For countless outdoor, marine, or industrial applications, galvanized steel is an essential fabrication component. The reduction of the corrosion rate of zinc is an important topic. In the past, a very popular way to reduce the corrosion rate of zinc was to use chemical conversion layers based on $Cr^{+6}$. However, a significant problem that has arisen is that the use of chromium salts is now restricted because of environmental protection legislation. Therefore, it is very important to develop new zinc surface treatments that are environmentally friendly to improve the corrosion resistance of zinc and adhesion with a final organic protective layer. In this study, a Urethane solution (only Urethane 20 wt.%; S-700) and an organic/inorganic solution with Si (Si polysilicate 10 wt.% + Urethane 10 wt.%; LRO-317) are used. Based on the salt spray test of 72 h, S-700 and LRO-317 had a superior effect for the corrosion resistance on EGI and HDGI, respectively.

• Journal of Environmental Science International
• /
• v.17 no.11
• /
• pp.1227-1233
• /
• 2008

The effect of freeze drying and fixatives in post-treating freeze drying on the morphological properties of the rose (Rosa hybrida L.) petal were investigated for the production of high quality of freeze dried rose. The morphology including form and color of the dried flowers of cut rose were depended on the drying methods. The drying time was extended due to their density and water content, and was shorter in the freeze drying than that in the natural and hot air drying. Freeze dried process for dried flowers took 2 days in a freeze dryer and did not cause shrinkage or toughening of rose petal being dried, preserving its natural shape and color. The diameter of freeze dried flowers showed little reduction compared to fresh flowers. In Hunter color values of petals of freeze dried flowers, L and a values were high and showed little variations in comparison to fresh petals. Freeze drying led to a noticeable increase in anthocyanin contents in petals, suggesting that anthocyanin contents play an important role in the acquisition of freezing tolerance. Exposure of flowers to freeze drying was accompanied by an increase in the carotenoid content. In the post-treating freeze drying, epoxy resin, a fixative, applied alone or in combination to petals of freeze dried flowers showed efficient coating for the protection from humidity and sunlight. Combined application of epoxy and acetone to freeze dried petals permitted maintenance of natural color and excellent tissue morphology, showing color stability and shiny texture in surface of petals. These findings suggest that application of fixatives to freeze dried rose petals improves the floral preservation and epoxy coating provides good quality in the freeze dried flower product.

• Journal of the Korean Society of Costume
• /
• v.58 no.4
• /
• pp.113-127
• /
• 2008

Artificial lights have effected the changes of art and fashion concepts as well as human life since the invention of electric light bulb in late 19th century. Artist and designer have had more interested in these artificial lights as the development of digital technology and the change of millennium and they have tried to apply the lights into their works. The purpose of this study is to analyze the aesthetic characteristics of contemporary fashion design using artificial light as a medium. Artificial light for fashion design means the light using luminescent material like phosphorescent and fluorescent materials or in combination with electroluminescent digital technology or the light that can be perceived as images when light projects from media using a light projector or other digital equipment. Fashion design using this light type can change colors or form temporarily and it can playa role as a gadget for hm or as equipment to provide information much as a computer monitor does. And designer can create virtual patterns on the surface of clothes, or virtual fashion like a 3-dimensional holography in empty space. In these fashion designs, the virtual image of light is substituted for physical formative elements in fashion, and the viewer can experience an ambiguity between reality and virtuality. The results of the study were as follow; The formative characteristics of those fashion designs were identified as visibility, indeterminacy, integration and virtuality. And they reflected the internal meanings; the persue of protection and safety, the search for experiment and innovation, the will for interaction and communication and the desire for the deviation and fun.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.320-330
• /
• 2012

The natural dyeing of cotton fabrics with guava leaf extract was investigated. The temperature and time of dyeing are $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. In addition, the dyebath has been set at pH 5. Sn pre-mordanted fabrics showed the highest K/S value. Regardless of dyeing temperature, K/S values were high when Al, Cu, Fe-mordanted fabrics were dyed in post-mordanting and Sn-mordanted fabrics were dyed in pre-mordanting. The K/S value of dyeing fabrics could be increased with repetitive dyeing and mordanting. Compared to untreated dyed fabrics, the K/ S values of fabrics which had been treated with soybean milk, chitosan and gall nut tannin were increased. The changed surface colors of fabrics that were treated with soybean milk, chitosan and gall nut tannin were Y, YR and achromatic colors. Fabrics dyed with alkaline water extract showed reddish color. Sn-mordanted fabrics dyed with acidic water extract showed vivid yellowish color, and Cu-mordanted fabrics dyed with ethanol extract showed yellowish green color. In case of Sn-mordanted fabrics, the washing fastness was level 4. The dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness was better in dry rubbing than in wet rubbing of the fabrics. For the light fastness, all dyed fabrics showed low fastness. For antibacterial activity, the powder of guava leaf extract and the dyed fabrics with guava leaf extract showed 99.9% of high antibacterial activity. All dyed fabrics showed higher deodorization and UV protection rate than control fabric.

• Journal of Fashion Business
• /
• v.21 no.4
• /
• pp.116-126
• /
• 2017

This study applied a segmented hard shell design on knee protectors for children with the objective of increasing mobility. The prototype of the hard shell that does not correspond to movement of the body among components of the knee protector was developed. Surface modeling was conducted based on 3D knee data to enhance comfort through optimized fit on the knee joint where the hard shell would be worn. For this, previous studies on changes in skin near the knee joint during knee flexion were reviewed to establish basic segmental lines. The basic design included six segments, and the number of segments was used as the design variable by increasing or decreasing it to 0, 3, 6, 9, and 14 segments. A prototype was produced from 3D printing with TPU material, worn for wearing assessment. Results revealed fewer numbers of segments resulting in less fit with the body, while actual appearance was stable. Meanwhile, the number of proper segments improved better fit with the body during movement. The wearing assessment revealed the amount of gap reflects change in skin length depending on movement. Assessment results demonstrated basic segment design, S6 with 6 segments, had the best design and most optimized fit. Findings in this study can provide key data for designing knee protection products for children.