• Ocean Systems Engineering
• /
• v.6 no.4
• /
• pp.345-362
• /
• 2016

This study aims to develop the numerical method to estimate level ice impact load and investigate the dynamic interaction between an arctic Spar with sloped surface and drifting level ice. When the level ice approaches the downward sloped structure, the interaction can be decomposed into three sequential phases: the breaking phase, when ice contacts the structure and is bent by bending moment; the rotating phase, when the broken ice is submerged and rotated underneath the structure; and the sliding phase, when the submerged broken ice becomes parallel to the sloping surface causing buoyancy-induced fictional forces. In each phase, the analytical formulas are constructed to account for the relevant physics and the results are compared to other existing methods or standards. The time-dependent ice load is coupled with hull-riser-mooring coupled dynamic analysis program. Then, the fully coupled program is applied to a moored arctic Spar with sloped surface with drifting level ice. The occurrence of dynamic resonance between ice load and spar motion causing large mooring tension is demonstrated.

• Korean Journal of Plant Taxonomy
• /
• v.53 no.2
• /
• pp.102-109
• /
• 2023

The basic information of ovule and seed characteristics was investigated for five monotypic and endemic genera in the Korean peninsula as categorized by the Flora of Korea category. The carpels and seeds were sectioned with a rotary microtome. Mature seeds were coated with platinum using an ion sputter and observed using a scanning electron microscope. As a result, Abeliophyllum was found to be anatropous and a unitegmic ovule, with a slightly colliculate seed surface and exotestal seed coat type. The ovule of Coreanomecon was anatropous and bitegmic, having a distinct echinate seed surface, and exo-endotestal seed coat type with a prismatic crystal in the mesotesta. The ovule of Hanabusaya was anatropous and a unitegmic, with a long reticulate seed surface sculpture, and distinct exotestal seed coat type. In addition, a wing developed at the opposite side of the raphe bundle. Megaleranthis was an anatropous and bitegmic ovule, having a small pentagonal disk shape, a concave seed surface and exotestal seed coat type. Finally, Pentactina was also anatropous and a unitegmic ovule, reticulate seed sculpture, and endotestal seed coat type. These data will be proving to be a source of good information for securing bio-sovereignty in the near future.

• The Journal of Korean Physical Therapy
• /
• v.14 no.3
• /
• pp.45-59
• /
• 2002

The purpose of this study was to investigate the effects of strengthening exercise program on the improvement of balance in the elderly Subjects were forty members living in Daegu (20 males, 20 females), between 65 and 81 years of age. The subjects were divided into two groups; an experimental group and a control group, and each group included 10 males and 10 females. The subjects for the experimental group were participated in the strengthening exercise program for 8 weeks, between April 2001 and June 2001 The results of this study were as follows: 1. General characteristics statistically significantly affecting for CTSIB were mental status; weight, height, vision, systolic blood pressure, diastolic blood pressure, pulse rate, mental status, obesity and thigh BMD were BBT; age, weight, height, vision, blood pressure systolic, blood pressure diastolic, blood pulse rate, mental status, obesity, spine BMD and thigh BMD were for OLST. 2. After the exercise program, there was no significant difference in the balance ability between the experimental group and the control group in CTSIB. However, there was a significant difference in OLSTR on the hard (p<0.05) and soft (p<0.05) surface with open eyes condition between the experimental group and the control group. In the case of OLSTL, there was a significant difference on the hard surface with open eyes condition (p<0.05), and on the soft surface with open eyes condition (p<0.05) and closed eyes condition (p<0.05) between the experimental group and the control group. There was no significant difference in the balance ability between the experimental group and the control group in BBT.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.2
• /
• pp.39-45
• /
• 2008

Formaldehyde and volatile organic compounds (VOCs) are emitted from wood-based panels that have been made using wood particles, wood fiber, wood chips, formaldehyde-based resins and so on. In this study, we examined formaldehyde and total VOCs (TVOC) emission behaviors for plywood overlaid with water-soluble phenolic resin impregnated linerboard (PL), and two kinds of surface materials (decorative veneer and pre-impregnated finishing foil) that were adhered onto the PL that named DPL and PPL. EVA (ethyl vinyl acetate) was used to overlay the decorative veneer and pre-impregnated finishing foil on the plywood with water-soluble phenolic resin impregnated linerboard by a hot press instrument. The debonding test and accelerated aging test were conducted to assess their mechanical properties. Formaldehyde and TVOC emission concentrations were measured using the FLEC method and a VOC Analyzer, respectively. The debonding test results of PL, DPL and PPL were 1.2, 1.5, and $0.5N/mm^2$, respectively. The surface appearance of the samples were not changed after the accelerated aging test. The PL and DPL exhibited reduced formaldehyde and TVOC emission levels, respectively. In the case of PPL, the VOC value was relatively higher than those of PL and DPL.

• Journal of Information Technology Services
• /
• v.12 no.4
• /
• pp.165-174
• /
• 2013

Log scaling which decides a quality grade of log is influence the price of log at the market. It is the one of important works at the field until now. So it remains using a ruler traditionally. This study evaluated the automating program through compared the automating program with using a ruler for log. The automating program used libraries of OpenCV concerning image processing algorithm to measure log diameter for scaling. In addition, it applies two panels of checkered pattern beside a pile of logs and tapes on the surface of a log diameter to find a correct value. We analyzed statistical mean difference of both log diameter and volume. In conclusion, the automating program after applying check panel and taping ins't different using a ruler. Therefore we need to considerate about applying it for improving Forest Administration.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.768-771
• /
• 2006

Uniformity and performance characteristics of LTPS TFTs are important parameters for making advanced active-matrix displays. In this paper, we describe an SLS-based crystallization approach for producing orientation-controlled Si films with reduced concentrations of planar defects that stand to potentially deliver unprecedented levels of device uniformity and performance. Specifically, a 2-step process referred to as hybrid SLS has been developed that produces a variety of high-quality {100} surface-oriented Si films.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.8
• /
• pp.126-134
• /
• 2003

In this study we do for the thing to develop automatic geometry design program of a mechanical element that we have used in CAD/CAM system. The program, which produces automatically three-dimensional surface and a solid model that have been used in CAD/CAM system, widely create automated two and three-dimensional model to by inputting several necessaries for a design, fur the design element. It is emphasized if you are just a beginner having only basic knowledge of the mechanical engineering, you might be able to design easily a three-dimensional model. The software to be used to develop automatic geometry design program is visualLISP to be a developer program of AutoCAD.

• The Bulletin of The Korean Astronomical Society
• /
• v.34 no.1
• /
• pp.66-66
• /
• 2009

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.2
• /
• pp.133-138
• /
• 2009

Nelumbo nucifera (lotus) is known to be a useful medicinal plant and leaf extract contains several flavonoids and alkaloids. To analyze the effect of Nelumbo nucifera leaves extract (NNL) on the HBsAg production, we treated NNL on HepG2.2.15 cells which contain the hepatitis B viral genome and secrete surface antigen into media. NNL suppressed the production of hepatitis B surface antigen as a dose-dependent manner. To analyze the effect of NNL on HBV DNA replication, PCR analysis was performed. NNL was not affected the HBV DNA replication and HBsAg mRNA expression. To understand the effect of NNL on the production of HBsAg, we carried out the analysis of lipid-metabolizing gene expression using one-step RT-PCR. NNL reduced the gene expression of FASN and SREBP2 and increased the expression of LDLR. Triglyceride content of HepG2.2.15 cells was not decreased by treatment of NNL. This result suggests a possibility that NNL may have an effect for the inhibition of hepatitis B surface antigen by modulation of lipid and cholesterol metabolism.

• Physical Therapy Korea
• /
• v.10 no.1
• /
• pp.109-128
• /
• 2003

This study tested whether repeated measurement of median frequency (MDF)-related variables could express the muscle power changes during a 12-week DeLome strengthening program, by using consecutive overlapping FFT (Fast Fourier transformation) and integrated EMG (IEMG) from surface EMG data for isometric and isotonic exercise. To evaluate the effect of training, the following were recorded every 3 weeks for the elbow flexors and knee extensors of 5 healthy male volunteers: MVC, lRM, limb circumference, and surface EMG during isometric MVC or isotonic contraction at 10RM load. From the EMG data, IEMG and variables from a regression analysis between MDF and time were obtained. MVC, lRM, IEMG, and initial MDF increased linearly over the training period. The fatigue index and slope of the regression line increased temporarily until the 6th week and decreased thereafter. From these results, there appeared to be enhanced neural recruitment of fast twitch fibers in the first 6 weeks and continued enhancement in the recruitment and hypertrophy of fast twitch fibers, which led to increased fatigue resistance, over the last 6 weeks. Accordingly, the MDF and IEMG analysis technique could demonstrate the effect of the program detected significant changes in both isometric and isotonic contractions. EMG analysis methods can be used to estimate the electrophysiological and histological changes in skeletal muscles during a strengthening program.