• 펄프종이기술
• /
• 제48권3호
• /
• pp.107-114
• /
• 2016

Terra Alba Wallpaper was manufactured by coating inorganic terra alba paint on white base paper, and the surface of the coated layers were microscopically observed. Eco Terra Alba used the functional wall paper in this study was prepared by mixing inorganic Terra Alba and calcium carbonate. Terra Alba showed particle shape. The concentration of inorganic components, pH, and the viscosity of the coating solution were 92.0%, 7.82, 1286 cPs, respectively. The bar coater whit No 3 wire resulted in the least thickness of wet coating layer and coating thickness such $22.5{\mu}m$ with covered all the surface. Bar coater with No. 12 wire leaded to $48.4{\mu}m$ thickness. The coating layers above $43{\mu}m$ thickness showed the cracks on the wall paper surface after coating.

• 한국가구학회지
• /
• 제17권1호
• /
• pp.23-32
• /
• 2006

This study was carried out to explore a new application of traditional Hanji and obtain fundamental properties for producing Hanji wallpaper by incorporating ceramics from wood and rice-husk as an interior building material. The results of properties determined were summarized as follows: The addition of ceramics in Hanji paper reduced its apparent density, but increased bulk density due to the ceramic particles distributed on the surface and inside the fiber of Hanji wallpapers. In particular, woodceramic particles were specifically distributed on the fiber surface, while particles of rice-husk ceramics were permeated into the inside surface of fibers. The density of rice-husk ceramics were greater than that of woodceramics. The physical properties of Hanji wallpapers, such as breaking strength, wet breaking strength, burst strength, tear index and folding endurance were deteriorated with the addition of ceramics. However, the addition of woodceramics in the Hanji wallpaper resulted in better strength in most cases than that of rice-husk ceramics, except tear strength. Therefore, an optimum addition level of woodceramics into the wallpaper was found to be 5% on the basis of intensity. The addition of ceramics also prolonged the combustion time because it lowered air permeability and brightness of the wallpaper.

• Elastomers and Composites
• /
• 제53권3호
• /
• pp.131-135
• /
• 2018

This study was aimed at improving the white index (WI) to prepare thermally expandable microspheres for wallpaper. In particular, thermally expandable microspheres were prepared for different colloidal silica particle sizes to study thermal properties, foaming ratio, and WI. The spheres obtained from tiny colloidal silica were the best in terms of WI and yellowing. Additionally, thermogravimetric analysis results show that small colloidal silica particles are more likely to be adsorbed physically or chemically to the microsphere surface, thereby improving WI at higher temperatures.

• 한국실내디자인학회논문집
• /
• 제25권2호
• /
• pp.59-69
• /
• 2016

This study aimed to understand the importance of applying finishing materials into interior space, and to add meaning to the creation of functional space, associated interior finishing materials with brain science. To achieve this purpose, brainwave(EEG) experiment was conducted. The brainwave appearing when sensing the surface of interior finishing materials with hands was measured. The locations of the electrode were FP1, FP2, F3, F4, C3, C4, P3, P4, O1, O2, F7, F8, T3, T4, T5, T6, CZ, FZ, and PZ and in addition to these, AFZ was added. Eight(8) kinds of finishing materials: metallic material, film paper, lumbar, stone, glass, silk wallpaper, fabric, and paint were used to measure '${\alpha}$-wave against ${\beta}$ wave.' As a result, it was found that the most activated finishing material in term of relaxation was film paper, followed by metallic, glass, paint, fabric, stone, lumbar, and silk wallpaper. To explain in light of this, (1) '${\alpha}$-wave against ${\beta}$ wave' was the most activated at ch1-FP1 and ch2-FP2, and at ch17-AFZ and ch19-FZ, which indicated that metopic-prefrontal lobe showed the highest activation in relaxation. Film paper, among the finishing materials, showed the highest increase in relaxation. (2) In general, '${\alpha}$-wave against ${\beta}$ wave' relaxation was inhibited at ch13-T3 and ch14-T4, and at ch15-T5 and ch16-T6 and the arousal in the temporal lobe was prominent. Silk wallpaper, among the finishing materials, showed the highest arounsal effect. As a result of measuring the superficial touch on the silk wallpaper, which was regarded as the most rough material among the eight finishing materials, the arousal effect of ${\alpha}$-wave against ${\beta}$-wave, among the brainwave characteristics, was found to be the highest. (3) to judge from the scope of this experiment regarding the tactile sensation over the finishing materials, it is considered that the brainwave reaction sometimes appeared contrastive depending on whether the surface was smooth or rough and there also appeared a difference in relaxation and arousal reaction of the brainwave depending on whether the surface was hot or cold, but the sensation on the surface texture was often evaluated differently depending on who you were. For this reason, this study has some limitations.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.17-21
• /
• 1997

This study was carried out to develop the manufacturing technique of Korean paper(Hanji) and find out new uses of machine-made Hanji produced on a a large scale by paper machine. Six kinds of Hanji were made and laminated with backpaper by acryl-based or vinyl acetate ethylene-based adhesive. Six kinds of wallpapers were made such as WH 1, WH 2-1, WH 2-2, WH 3-1, WH 3-2 and WH 4. Physical properties and quality test on the wallpapers were examined. Physical strength of the wallpapers was better than each strength of the Hanji and backpaper. It might be a roll of adhesive. And so, Production cost of the Hanji could be brought down if the Hanji was made thin to get strength not enough to cut during lamination of two papers(Hanji and backpaper). Hanji wallpapers of WH 3-1 and WH 4 are lower than a standard in sunlight resistance and WH 1 is in properties of opacity. WH 2-1, WH 2-2 and WH 3-2 were better than Korean standard in some quality tests. WH 2-2 and WH 3-2 were superior to other wallpapers as a whole. About, twenty kinds of wallpapers with surface treatment, are now being produced on the basis of these two types of wallpapers.

• 공업화학
• /
• 제18권1호
• /
• pp.17-23
• /
• 2007

제지용 무기안료에 항균기능과 광촉매 탈취기능을 부여하기 위해 hybridization system을 이용하여 Ag 용액과 $TiO_2$로 표면 개질 처리하여 기능성 무기안료를 제조하고, 이를 이용하여 항균 및 탈취 기능을 갖는 특수지를 제조한 후 내항균 특성을 평가하였다. 내항균 평가로는 균의 생성여부를 눈으로 직접 확인 할 수 있는 halo test법, 균들의 생육 저하효과를 확인하는 방법인 inhibition growth test와 정균감소법을 사용하였다. 또한 제조된 항균기능성 특수지를 벽지용도로 적용하고자 하였으며, 내항균 평가 시 항균벽지 주위로 선명한 클리어 존이 형성되어 균의 성장 억제를 육안으로 확인할 수 있었다. 항균 및 탈취기능을 지니는 특수지의 휘발성 유기화합물 분해능 평가를 위한 benzene의 광촉매 분해 효율실험에서 반응시간 80min 동안 45~50%의 제거효율을 보였으며, 반응시간 30 min 정도에서 분해효율이 90% 이상 도달함을 알 수 있었다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제30권2호
• /
• pp.15-22
• /
• 2024

Purpose: In general, cross-infection caused by bacteria occurs more in hospitals than in local communities. In most cases, infectious diseases spread through contact transmission (direct contact, indirect contact). This study tries to examine which places are most likely to detect infections bacteria and what materials should be used to effectively suppress the spread of infectious bacteria. Methods: Domestic and international literature have been reviewed to determine which bacteria are common and spread in which places. At the same time, antibacterial experiments for several finishing materials are performed to determine the survival period of bacteria for each material. The experiment is conducted mainly on antibiotic-resistant bacteria (MRSA, CRE, etc.) that have a high mortality rate and are very contagious. Results: MRSA has a high incidence in many hospital departments with surgery or immunocompromised patients, such as the elderly, organ transplant patients, and hemodialysis patients. There are experimental results that MRSA dies early in ceramics or silk wallpaper. CRE has a high incidence in hospital departments where there are many patients who are prone to bacteria entering the body directly, such as ventilator patients or critically ill patients with surgical wounds. There are experimental results that CRE dies early in silk wallpaper. In addition, bacteria die on the surface for a variety of reasons. Most MRSA and CRE develop in patients with impaired immunity or surgery, and rapidly die in copper or materials with antibacterial properties. Implications: If finishing materials surface with the ability to kill specific bacteria is used in the place where a large number of specific bacteria are detected, the spread of infectious diseases can be effectively controlled.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2013년 추계학술대회
• /
• pp.275-290
• /
• 2013

The main cause of building fire fatalities occur in the combustible material heat, smoke and toxic gases are. Building interior decoration, etc., especially as much of the harmful substances generated during combustion, and, used in domestic architecture wallpaper, ceiling, and other plastics, built-in foam insulation also analyzed recognition of fire hazards approach to test the conkalrorimiteo test, choedaeyeolbangchulryul through, chongbal heat, mass loss rate, generates carbon monoxide gas hazard ratio tests, analysis and evaluation rigid foam index testing the toxicity of hazardous material generated by performing a gas clean up and assess the material test results, the minimum order to provide data to quantify the risk of fire. Ensure fire safety of building materials, composite materials in order to test the various risk factors could be considered organic to the introduction of testing and evaluation is needed urgently.

• KIEAE Journal
• /
• 제4권4호
• /
• pp.3-10
• /
• 2004

If move in in the new apartment usually, do that hundreds hazardous substance among air floats and is broken-down. In the case of the floor, organic compound turns in adhesives that is bitter when attach the reinforcement floor and material lumber and hazardous substance is exhausted much wallpaper and concrete. Therefore, to reveal maximum this research to apply on interior of building to live function of charcoal, at non combustible material two faces that can promise safety from fire, strong and satisfy light performance, and it is thing about development of sheathing that use recycling material for barren land of multi-function and surface treatment of charcoal board as well as can keep healthy indoor environment.

• 설비공학논문집
• /
• 제8권3호
• /
• pp.397-412
• /
• 1996

This study aims to present the fundamental strategies to improve the Indoor Air Quality (IAQ) in apartment buildings. To investigate the concentration of indoor air pollutants such as radon, formaldehyde, and VOCs, both the document survey and the field measurement were conducted. In addition, to identify the source of the air pollutants, the laboratory experiment was carried out for various building materials. Finally, the minimum period to be reserved befor3e building occupation to ensure healthy IAQ, which largely depends on the ventilation rates, was simulated using a simple compuer program. The results of this study can be summarized as follows: 1. In case of newly-constructed apartment houses, concentrations of formaldehyde, VOCs and radon were found to exceed the standard. Meanwhile, at existing apartment houses, concentrations of VOCs, particularly toluene and xylene, highly exceeded the standasrd level. Concentrations of formaldehyde and radon, however, had been lowered according to the duration of occupation. 2. The laboratory experiment of concentration of pollutants per square meter of building material surface area showed that radon gas was much emitted from the gypsumboard; formaldehyde from flooring and wallpaper; and VOCs from paints and kitchen furnishings. The emission rates of formaldehyde and VOCs were proportional to air temperature. 3. According to the simulation of the minimum period to be reserved before occupation, newly-constructed airtight houses required about 190-200 days, and naturally ventialted houses with fully-open-windows required about 20-45days, in order to keep the level of radon gas lower than standard. Therefore, with the current practice, the date of occupation should be delayed for about 15 days.