• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.5
• /
• pp.443-450
• /
• 2006

The present study has been conducted to investigate the effects of rotation on heat/mass transfer and pressure drop characteristics in a two-pass square duct with and without discrete ribs. For stationary cases, the heat/mass transfer on the surfaces with and without discrete ribs is almost the same or reduced. For rotating cases, the gap flow affects differently the heat/mass transfer on leading and trailing surfaces with discrete ribs. On the leading surface of the first pass, the heat/mass transfer is slightly enhanced due to generating strong gap flow. On the trailing surface of the first pass, however, the heat/mass transfer is much decreased because the gap flow disturbs impingement of main flow. The phenomenon, that is, the heat/mass transfer discrepancy between the leading and trailing surfaces is distinctly presented with the increment of rotation number. The friction losses on each surface with discrete ribs are reduced because the blockage ratio decreases for both non-rotating and rotating cases. Therefore, high thermal performance appears in a duct with discrete ribs.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.5
• /
• pp.309-315
• /
• 2018

The purpose of this study is to assess the mechanical properties of the ceramic abutment with washer. In this study, ceramic abutment were used, tested with $30^{\circ}$ compression load, shear fatigue, adaptation accuracy test(rotation angle, contact interval), removal torque force test, torsional breaking force test. The $30^{\circ}$ compression load was 729 N, the shear fatigue load was 275 N, adaptation accuracy test of rotation angle was within $3^{\circ}$, contact interval within $10{\mu}m$, and removal torque force test value is $18.88N{\cdot}cm$, torsional breaking force test value is $35.52N{\cdot}cm$. Ceramic abutment with a washer fitted have sufficient mechanical strength and may be substituted for titanium abutment.

• The KSFM Journal of Fluid Machinery
• /
• v.10 no.2 s.41
• /
• pp.32-40
• /
• 2007

The present study investigated local pressure drop in a rotating smooth square duct with turning region. The duct has a hydraulic diameter $(D_h)$ of 26.7mm and a divider wall of 6.0mm or $0.225D_h$. The distance between the tip of the divider and the outer wall of the duct is $1.0D_h$. The Reynolds number (Re) based on the hydraulic diameter is kept constant at 10,000, and the rotation number (Ro) is varied from 0.0 to 0.20. The pressure coefficient distribution $(C_p)$, the friction factor (f) and the thermal performance $({\eta})$ are presented on the leading, the trailing and the outer surfaces. It is found that the curvature of the $180^{\circ}-turn$ produces Dean vortices that cause the high pressure drop in the turning region. The duct rotation results in the pressure coefficient discrepancy between the leading and trailing surfaces. That is, the high pressure values appear on the trailing surface in the first-pass and on the leading and side surfaces in the second-pass. As the rotation number increases, the pressure discrepancy enlarges. In the fuming region, a pair of the Dean vortices in the stationary case transform into one large asymmetric vortex cell, and then the pressure drop characteristics also change.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.178-184
• /
• 2005

The present study investigates the effects of bleed flow on heat/mass transfer and pressure drop in a rotating channel with transverse rib turbulators. The hydraulic diameter ($D_h$) of the square channel is 40.0 mm. The bleed holes are located between the rib turburators on leading surface and the hole diameter (d) is 4.5 mm. The square rib turbulators are installed on both leading and trailing surfaces. The rib-to-rib pitch is 10.0 times of the rib height (e) and the rib height-to-hydraulic diameter ratio ($e/D_h$) is 0.055. The tests were conducted at various rotation numbers (0, 0.2, 0.4), while the Reynolds number and the rate of bleed flow to main flow were fixed at 10,000 and 10%, respectively. The results suggest that the heat/mass transfer characteristics in the internal cooling passage are influenced by rib turbulators, bleed flow and the Cariolis force induced by rotation. For the rotating ribbed passage with bleed flow, the heat/mass transfer on the leading surface is hardly affected by bleed flow, but that on the trailing surface decreases due to the diminution of main flow. The results also show that the friction factor decreases with the bleed flow.

• The Journal of Korean Physical Therapy
• /
• v.25 no.5
• /
• pp.337-342
• /
• 2013

Purpose: This study was conducted in order to determine the effect of visual and tactile feedback on muscle activity of the gluteus maximus (Gmax) and abdominal muscles and the motion of pelvic rotation during performance of clam exercise (CE). Methods: Thirteen subjects without low back pain were recruited for this study. Each subject was instructed to perform the CE without and with feedback. The subjects were instructed to keep pelvic from rotating backwards by palpating the ASIS and monitoring the pelvic movement by themselves during performance of CE with feedback. The electromyographic (EMG) activities of Gmax and abdominal muscles were collected using surface EMG. Angles of pelvic rotation were measured using a 3-dimensional motion-analysis system. Paired t-tests were used for comparison of EMG activities in each muscle and the angle of pelvic rotation. Results: The EMG activities of all abdominal muscles were not significant between CM without and CM with feedback (p>0.05). The EMG activity of Gmax was significantly greater in CM with feedback compared with CM without feedback (without vs. with feedback; 14.2% vs. 20.7%MVIC) (p<0.05). The angle of pelvic rotation was significantly less in CM with feedback compared with CM without feedback (without vs. with feedback; $15.3^{\circ}$ vs. $10.8^{\circ}$ ) (p<0.05). Conclusion: Therefore, these findings suggest that CM with the visual and tactile feedback is effective in activation of the Gmax and correcting of the uncontrolled lumbopelvic rotation during CE.

• Physical Therapy Korea
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2010

The purpose of this study was to compare EMG activity for pectoralis major muscle during shoulder movement with various abduction angle and rotation position in supine position. Fifteen healthy subjects were recruited for this study. All subjects performed shoulder horizontal adduction holding a 2 kg dumbbell in shoulder abduction $40^{\circ}C$, $70^{\circ}C$, $90^{\circ}C$, $130^{\circ}C$, $160^{\circ}C$ with shoulder neutral, internal rotation (IR), and external rotation (ER). Surface EMG activity was recorded from pectoralis major clavicle part and pectoralis major sternum part for 5 seconds and EMG activity was normalized to the value of maximal voluntary isometric contraction (%MVIC). Dependent variables were examined with 3 (Neutral, IR, ER) ${\times}$ 5 ($40^{\circ}C$, $70^{\circ}C$, $90^{\circ}C$, $130^{\circ}C$, $160^{\circ}C$) analysis of variance with repeated measures. The EMG activity of pectoralis major muscle was significantly different between shoulder abduction angles and between shoulder rotation positions (p<.05). The highest value of EMG activity of pectoralis major clavicle part among shoulder abduction angles was in $70^{\circ}C$ and, $90^{\circ}C$ in that order. The highest value of EMG activity of pectoralis major sternum part among shoulder abduction angles was in $130^{\circ}C$ and, $90^{\circ}C$ in that order. According to the rotation degree, shoulder ER showed the highest value and IR showed the lowest value in both muscle parts. These results suggest that shoulder abduction $70^{\circ}C$, $90^{\circ}C$, $130^{\circ}C$ will be effective during manual muscle testing (MMT) and strengthening exercise for pectoralis major muscle. It is also supposed that shoulder ER is the efficient posture for strengthening of pectoralis major muscle.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.22 no.1
• /
• pp.51-58
• /
• 2016

Background: Evidence for effective management of scapular downward rotation syndrome is limited. The present study was performed to compare the scapular muscle activation through 4weeks wall slide exercise and sling slide exercise in subjects with scapular downward rotation syndrome. Methods: Twenty-two subjects with scapular downward rotation syndrome participated in the study. Surface electromyography data were collected from the upper and lower trapezius, serratus anterior and pectoralis major during shoulder flexion of $60^{\circ}$, $90^{\circ}$ and $120^{\circ}$ in the sagittal plane. The alignment of the scapula was measured using radiographic analysis. Subjects were assessed pre and post a 4 weeks exercise (wall slide, sling slide). The significance of the difference in pre- and post-exercise within each groups was assessed using a paired t-test. The significant difference between wall- and sling-exercise was used a independent t-test. Results: In the wall slide group, the muscle activity of upper trapezius decreased significantly during shoulder flexion at $60^{\circ}$, $90^{\circ}$ and $120^{\circ}$ after 4 weeks, and the muscle activity of serratus anterior increased significantly at all angles. Also, the muscle activity of pectoralis major decreased significantly at $90^{\circ}$ and $120^{\circ}$. Conclusions: Based on such results, it can be said that wall slide exercise is effective than sling slide exercise for the subjects with scapular downward rotation syndrome.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.19 no.2
• /
• pp.61-66
• /
• 2013

Background: This study tried to identify the bridge exercise posture for efficient exercise application by comparing muscle activity of buttocks and thighs according to internal-external rotation and pronation & supination in bridge exercise. Method: Nine males in their 20s living in D city were randomly selected as subjects. Muscles such as vastus medialis oblique (VMO), vastus lateralis (VL), semitendinosus (ST), biceps femoris (BF), gluteus maximus (GMAX), gluteus medius (GMED), tensor fasciae latae(TFL), and adductor longus (ADL) were measured using eight channel surface electromyogram (MyoSystem 1400A, Noraxon, USA) to measure muscle activity. Statistics process was performed through paired t test. Results: In the changes in electromyogram signals according to internal-external rotations according to internal-external rotation of shinbones, in most cases muscle activity was higher in external rotation than in internal rotation, but there was no statistical significance (p>.05). In particular, it was lower in TFL and ADL. There was no statistical significance in the comparison between two groups (p>.05). In the changes in electromyogram signals according to internal-external rotations according to pronation & supination of thighs, GMED showed significantly higher value in supination than in pronation (p>.05), and in ADL pronation is significantly higher than supination (p<.05). Conclusion: In internal-external rotation of shinbone and pronation & supination of thighs in bridge exercise, changes in muscle length can make effects on muscle activity of buttocks and thighs. Therefore, muscle strength enforcement program on buttocks and thighs through bridge exercise can make effects on patients with lower limb functional damages in clinical situations.

• Physical Therapy Korea
• /
• v.30 no.3
• /
• pp.237-244
• /
• 2023

Background: The external rotation (ER) exercise in performed at a 90° abduction of the shoulder joint is an effective to strengthen the infraspinatus. However, failure of the humeral head to control axial rotation during exercise can be increased the posterior deltoid over activity. Biofeedback training is an effective method of promoting motor learning and control it could look forward to activate the infraspinatus selectively by controlling the humeral head during exercise. Objects: The aim of this study was investigated that whether biofeedback for axial rotation was effective to activate selectively the infraspinatus during ER exercise. Methods: The 15 healthy males participated, and all subjects performed both ER exercise in a sitting position with shoulder abducted 90° under conditions with and without axial rotation biofeedback. Exercise was performed in a range of 90° ER, divided into three phases: concentric, isometric, and eccentric. The infraspinatus and posterior deltoid muscle activity were observed using surface electromyography. Results: Both infraspinatus activity (p < 0.01) and infraspinatus to posterior deltoid activity ratio (p = 0.01) were significantly higher with biofeedback however, posterior deltoid activity was significantly lower with biofeedback (p = 0.01). The infraspinatus muscle activity and muscle activity ratio were the highest in the isometric contraction type, and there were significant differences for all contraction types (p < 0.05). Whereas, the posterior deltoid activity was the lowest in the isometric contraction type, and showed a significant difference between isometric and other two contraction types (p < 0.05), but no significant different between concentric and eccentric contraction. Conclusion: Our results indicate that the axial rotation biofeedback during sitting ER exercise might be effective method to activating selective infraspinatus muscle and recommended to enhance the dynamic stability of the shoulder joint.

• Physical Therapy Korea
• /
• v.26 no.1
• /
• pp.67-74
• /
• 2019

Background: Uncontrolled lumbopelvic movement leads to asymmetric symptoms and causes pain in the lumbar and pelvic regions. So many patients have uncontrolled lumbopelvic movement. Passive support devices are used for unstable lumbopelvic patient. So, we need to understand that influence of passive support on lumbopelvic stability. It is important to examine that using the pelvic belt on abdominal muscle activity, pelvic rotation and pelvic tilt. Objects: This study observed abdominal muscle activity, pelvic rotation and tilt angles were compared during active straight leg raise (ASLR) with and without pelvic compression belt. Methods: Sixteen healthy women were participated in this study. ASRL with and without pelvic compression belt was performed for 5 sec, until their leg touched the target bar that was set 20 cm above the base. Surface electromyography was recorded from rectus abdominis (RA), internal oblique abdominis (IO), and external oblique abdominis (EO) bilaterally. And pelvic rotation and tilt angles were measured by motion capture system. Results: There were significantly less activities of left EO (p=.042), right EO (p=.031), left IO (p=.039), right IO (p=.019), left RA (p=.044), and right RA (p=.042) and a greater right pelvic rotation angle (p=.008) and anterior pelvic tilt angle (p<.001) during ASLR with pelvic compression belt. Conclusion: These results showed that abdominal activity was reduced while the right pelvic rotation angle and anterior pelvic tilt angle were increased during ASLR with a pelvic compression belt. In other words, although pelvic compression belt could support abdominal muscle activity, it would be difficult to control pelvic movement. So pelvic belt would not be useful for controlled ASLR.