• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.238-244
• /
• 2004

This research conducted milling tests to study effects of cutting environment conditions of ball end milts on the characteristics of high speed milling cutting process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAIN coated were utilized in the cutting tests. Dry cutting without coolant and semidry cutting using botanical oil coolant by the MQL(Minimum Quantity Lubricant) device were conducted. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that MQL spray cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than dry cutting did.

• 한국공작기계학회논문집
• /
• 제11권2호
• /
• pp.87-94
• /
• 2002

In domestic industry, there is no manufacturers specialized in the production of cutting tools for the difficult cutting materials. Then, we have flew data about them. In this study, the gear driving high speed lathe on which is mounted by a tool dynamometer and high speed CCTV were used to measure the various machining characteristics. Relations among the cutting speed, feed rate per revolution, cutting depth, cutting forces and surface roughness ware graphically analyzed under 64 cutting conditions. The process of chip, i.e., generation, development and falling-off also were visualized for the characterization of chip shapes of the difficult-to-cut materials using the CCTV.

• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.28-34
• /
• 2008

Recently, with the development of high speed machining technology for difficult-cutting materials, to improve the cutting performance of cutting tool, fine surface finish of complex shape tools using magnetic polishing technology is in high demand. This study is, therefore, discussed and compared the cutting characteristics of polished tools by the adopted various magnetic polishing moving types a point of view the cutting forces and the tool life. Moreover, the practicality of magnetic polished tools in the wide range cutting conditions is investigated. From obtained results, It is confirmed that the CW(clockwise) revolution and oscillation type as the polishing moving type is proper and magnetic polished tool shows the excellence in high cutting speed range.

• 소성∙가공
• /
• 제13권1호
• /
• pp.45-52
• /
• 2004

This research conducted milling tests to study effects of cutting environment conditions of ball end mills on the characteristics of hard milling process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAlN coated were utilized in the cutting tests. Dry cutting without coolant and semi-dry cutting using botanical oil coolant were conducted and MQL(Minimum Quantity Lubricant) device was used to spray coolant. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that dry cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than MQL spray cutting did.

• 산업경영시스템학회지
• /
• 제46권4호
• /
• pp.238-245
• /
• 2023

As technologies have been more quickly developed in this 4th Industry Revolution era, their application to defense industry has been also growing. With these much advanced technologies, we attempt to use Manned-Unmanned Teaming systems in various military operations. In this study, we consider the Location-Routing Problem for reconnaissance surveillance missions of the maritime manned-unmanned surface vehicles. As a solution technique, the two-phase method is presented. In the first location phase, the p-median problem is solved to determine which nodes are used as the seeds for the manned vehicles using Lagrangian relaxation with the subgradient method. In the second routing phase, using the results obtained from the location phase, the Vehicle Routing Problems are solved to determine the search routes of the unmanned vehicles by applying the Location Based Heuristic. For three network data sets, computational experiments are conducted to show the performance of the proposed two-phase method.

• 한국결정성장학회지
• /
• 제1권1호
• /
• pp.74-81
• /
• 1991

Czochralski 단결정 성장계에서 유체동의 표면 복사열전달을 고려하여 온도분포를 모사하였다. 복사열전달 고려시 표면요소들의 view factor를 고려하였다. 고-액의 2상은 고상에 가상적으로 매우 큰 점성을 부여하여 연속의 단상으로 처리하였으며 응고시 잠열은 반복열량 방출법을 개발하여 처리하였다. 본 연구에서 개발한 응고 모델을 증명하기 위하여 Ca 금속의 용융에 적용하여 실험결과와 비교한 결과 잘 맞는다는 것을 알아낸 후 본 모사 프로그램을 Cz계에서 Al금속의 단결정 성장에 적용하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.316-323
• /
• 2003

The gear system is commonly applied in the marine propulsion shafting system using the diesel engine with the power take off/in system and it also is necessary to reduce propeller revolution increasing the propulsion efficiency. The diesel engine has the advantage more than other thermal engines in high thermal efficiency and mobility. But the large vibratory torque which induced by higher combustion pressure is transmitted to these gears. In this paper, the surface durability and bending stress of gear system considering vibratory and transient torque is evaluated by ISO and AGMA regulation. And the influence of these in gear design is investigated with the theoretical analysis and onboard measurement result of torsional vibration.

• 한국조경학회지
• /
• 제24권4호
• /
• pp.123-131
• /
• 1997

Since the industrial revolution. the growth of cities has been especially apid and the rate of ulbanization has been high. This urban development is encroaching on the natural environment because the cities are developed with not only residential estates, industrial area and buildings but also with infrastructure. The surface area of the city is sealed ,with pavement whereas nature is disturbed and modified. The hydrological cycle in the city is inf1uenced by the change of land use I. e., from forest to agricultural land, talc draining of wetlands and above all the increase of built-up areas. The surface retention and interception of precipitation in the city is reduced. because the surface area is now smooth and solid. The characteristics of the hydrological cycle in the city are increased runoff, reduced evapotranspiration and infiltraction . We have too much faith in technology although it may cause more unforseen problems. We build more river banks and 'emulation dams and straighten rivers and streams in order to protect ourselves from disasters.. However. the results of hose developments are often higher$.$ water levels, the disturbance of aquatic ecosystems and the reduction of biodiversity. Therefore, we should examine problems from the hydrological cycle in cities and study a natural system as close cities to nature as possible. This paper shows the problems caused by the hydrological cycle in the city. The ecology-oriented method and design must be used in order to protect our environment from dicturbance.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.165-170
• /
• 2001

In normal grinding abrasive particles of a grinding wheel rotate on planes parallel to the direction of workpiece fred. which may induce continued scratch lines on ground surface as the workpiece feeds. Instead in helical scan grinding the planes make an angle, called a helical angle, with the feeding direction. Thus scratch lines produced by abrasive particles per one revolution are discontinued which implies that the generation of scratch lines are suppressed by the helical scan grinding. In this study some experimental works have been done on the helical scan grinding of glass to find the effects of grinding conditions on the surface roughness and estimate the optimal grinding conditions. The helical angle, fred rate, material removal rate and the wheel speed are taken as factors for three kinds of grinding wheels i.e., coarse(#140 mesh), medium(#400) and fine(#800) diamond wheels. The experiments are scheduled by Taguchi technique and ANOVA has been carried out for the interpretation of the results. As a result of this study effects of the factors are verified quantitatively showing that the major factors are changed according to the wheel's mesh size and the helical angle is one of the influencing factors on the surface quality.

• 한국기후변화학회지
• /
• 제6권2호
• /
• pp.95-104
• /
• 2015

To discuss whether we have credible estimations about historical surface temperature evolution since industrial revolution or not, present study investigates consistencies and differences of averaged surface air temperature since 1900 between the multiple data sources: Hadley Center Climate Research Unit (HadCRU4) surface air temperature data, ECMWF 20 Century Reanalysis data (ERA20CR), and NCEP 20 Century Reanalysis data (NCEP20CR). Averaged surface temperatures are obtained for the global, polar (90S~60S, 60N~0N), midlatitude (60S~30S, 30N~60N), tropical (30S~30N) region, separately. From the analysis, we show that: 1) spatio-temporal inhomogenity and scarcity of HadCRU4 data are not major obstacles in the reliable estimation of global surface air temperature. 2) Globally averaged temperature variability is largely contributed by those of tropical and midlatitude, which occupy more than 70% of earth surface in area. 3) Both data show consistent temperature variability in tropical region. 4) ERA20CR does not capture warm period over Arctic region in early 1900s, which is obvious feature in HadCRU4 data. Discrepancies among datasets suggest that high-level caution is needed especially in the interpretation of large Arctic warming in the early 1900s, which is often regarded as a natural variability in the Arctic region.