• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.761-766
• /
• 2011

In this study, the optimized design profiles between a seal ring and a seal seat of contacting seal units has been proposed based on the FEM computed results. The maximum temperatures, the thermal distortions in axial and radial directions, and maximum contact normal stresses between a seal ring and a seal seat have been analyzed for various contact sealing profiles. The FEM computed results present that the contact area between seal rings and seal seats is very important for a good tribological performance such as low friction heating, low wear, high contact normal stress in a primary sealing components. The seal surface model III in which has a small sealing contact area shows low dilatation of primary sealing components, and high contact stress between a seal ring and a seal seat. This model with small contact surface of a seal ring produces high friction heating and contact stress. But the model III produces very small deformations of contacting sealing surface because of high convection heat transfer by cooling water circulation around the seal ring surface. Thus, the analysis results recommend a short width of a primary sealing unit rather than a big width of contact surfaces of contacting seal units for reducing a leakage and axial deformation of primary seal components.

• Geomechanics and Engineering
• /
• 제12권2호
• /
• pp.185-195
• /
• 2017

With the rapid development of urban underground traffic, the study of soil deformation induced by subway tunnel construction and its settlement prediction are gradually of general concern in engineering circles. The law of soil displacement caused by shield tunnel construction of adjacent buildings is analyzed in this paper. The author holds that ground surface settlement based on the Gauss curve or Peck formula induced by tunnel excavation of adjacent buildings is not reasonable. Integrating existing research accomplishments, the paper proposed that surface settlement presents cork distribution curve characters, skewed distribution curve characteristics and normal distribution curve characteristics when the tunnel is respectively under buildings, within the scope of the disturbance and outside the scope of the disturbance. Calculation formulas and parameters on cork distribution curve and skewed distribution curve were put forward. The numerical simulation, experimental comparison and model test analysis show that it is reasonable for surface settlement to present cork distribution curve characters, skewed distribution curve characteristics and normal distribution curve characteristics within a certain range. The research findings can be used to make effective prediction of ground surface settlement caused by tunnel construction of adjacent buildings, and to provide theoretical guidance for the design and shield tunnelling.

• 대한한의학회지
• /
• 제23권4호
• /
• pp.169-185
• /
• 2002

Objectives: This study was carried out to investigate 1he effects of Sasammaickmoondong-tang(SME) on colonic mucosal lesions induced by indomethacin in mouse. Methods: The normal group is 1hat no inflammation elicitated mouse. Control group is that gastro-inflammation elicitated mouse. Sample group is that SME administered mouse after gastro-inflammation elicitation. Results: In the common morphology and histochemical change, control group was observed various injury-mucous surface cell, micro-villi, paneth cell, surface epithelial cell, goblet cell-by hemorrhagic erosion, while sample group was as same as normal group. In the immunohistochemical change, 1he distributions of COX-1, Bcl-2, and BrdU treated with SME noticeably increased than control group(P<0.05). The distributions of TUNEL, $NF-{\kappa}B$, COX-2, $IL-2R-\alpha$, NK-1.1, ICAM-1, and CD11b/18 treated with SME noticeably decreased than control group(P<0.05). And the distribution of SBA was as same as normal group. Conclusions: According to the above results, it is supposed that Sasammaickmoondong-tang is applicable to colonic mucosal lesions.

• 대한한의학회지
• /
• 제24권2호
• /
• pp.121-137
• /
• 2003

Objectives: This study was carried out to investigate the effects of Sasammaickmoondong-tang (SME) on gastric mucosal lesions induced by indomethacin in mice. Methods: The normal group was no inflammation-induced mice. The control group was gastro-inflammation-induced mice. The sample group was mice administered SME after gastro-inflammation elicitation. Results: In the common morphology and histochemical change, the control group was observed with various injury-mucous surface cell, micro-villi, paneth cell, surface epithelial cell, goblet cell - by hemorrhagic erosion, while the sample group was as same as the normal group. In the immunohistochemical change, the distributions of COX-1, Bcl-2, and BrdU treated with SME were noticeably higher than in the control group (p<0.05). The distributions of TUNEL, NF-B, COX-2, IL-2R-, NK-1.1, ICAM-1, and CD11b/18 in those treated with SME were noticeably lower than in the control group (p<0.05). Finally, the distribution of SBA was the same as in the normal group. Conclusions: According to the above results, it is supposed that Sasammaickmoondong-tang is applicable to gastric mucosal lesions.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 Proceedings of 2004 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.135-140
• /
• 2004

Several studies have utilized physical models of the healthy nasal cavity to investigate the relationship between nasal anatomy and airflow. With our experiences of experimental investigations on nasal airflows in normal and abnormal nasal cavity models, we are going to deal with the topic that may contribute to the diagnosis and treatment of nasal diseases. In this paper, airflows in the normal and artificially deformed models, which simulate surgical treatment, are investigated experimentally by PIV. High-resolution CT data and careful surface rendering of computational model with the help of the ENT doctor provide more sophisticated nasal cavity models. The CBC PIV (Correlation Based Correction PIV) algorithm with window offset is used for PIV flow analysis. Average and RMS distributions in sagittal and coronal sections are obtained for inspiratory and expiratory nasal airflows. Comparisons in nasal airflows for both normal and deformed cases are also appreciated. In case of simulations of surgical operations, velocity and RMS distributions in coronal section changes locally, this may cause some difficulties in physiologic functions of noses and may hurt mucosal surface.

• 소성∙가공
• /
• 제9권6호
• /
• pp.590-597
• /
• 2000

A finite element formulation lot the simulation of axisymmetric sheet hydroforming is proposed, and an implicit program is coded. In order to describe normal anisotropy of steel sheet, Hill's non-quadratic yield function (Hill, 1979) is employed. Frictional contacts among sheet surface, rigid tool surface, and flexible hydrostatic pressure are considered using mesh normal vectors based on finite element of the sheet. Applied hydraulic pressure is also considered as a function of forming rate and time and treated as an external loading. The complete set of the governing relations comprising equilibrium and interfacial equations is approximately linearized for Newton-Raphson algorithm. In order to verify the validity of the developed finite element formulation, the axisymmetric bulge test is simulated. Simulation results are compared with other FEM results and experimental measurements and showed good agreements. In axisymmetric hydroforming processes of a disk cover, formability changes are observed according to the hydraulic pressure curve changes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1359-1360
• /
• 2007

In this paper, it is described the characteristics comparison of LV insulated materials contaminated by the salt vaporization and the particulates. The contact angle of normal PVC is measured $75^{\circ}$ but its of PVC contaminated by the salt vaporization for 500 hours is measured $63^{\circ}$. The contact angle of normal bakelite is measured $66^{\circ}$ but its of bakelite contaminated by the salt vaporization for 500 hours is measured $44^{\circ}$. And the contact angle of normal acrylic resin is measured $65^{\circ}$ but its of acrylic resin contaminated by the salt vaporization for 500 hours is measured $60^{\circ}$. In the surface of insulated materials contaminated by the particulate, the contact angle is decreased. The surface of bakelite is not good as an insulator.

• 대한후두음성언어의학회지
• /
• 제21권2호
• /
• pp.105-111
• /
• 2010

The vibratory or phonating surface of the human vocal folds is a complex layered structure. Benign vocal fold lesions arise primarily within the lamina propria of the vocal folds and produce dysphonia by disrupting the normal layered architecture of the phonating surface. Therefore, treatment is aimed at excision of the lesion with restoration of the normal layered architecture. The core principle of the Microflap approach is that conservative removal of submucosal pathology with preservation of overlying normal epithelium and superficial lamina propria. Microflap approach is an essential component of most phnomicrosurgical procedures and is a challenging surgical task that requires patience, appropriate instrumentation, surgical skill, and experience. The authors reviewed surgical principles of Microflap technique, instrumentation and surgical tips that could be useful for the beginners who tried to try Microflap technique for the treatment of benign vocal fold mucosal lesions.

• Nonlinear Functional Analysis and Applications
• /
• 제26권2호
• /
• pp.225-236
• /
• 2021

In this paper, we determine position vector of a line of curvature of a regular surface which is relatively normal-slant helix, with respect to Darboux frame. Then, a vector differential equation is established by means Darboux formulas, in the case of the geodesic torsion is vanishes. In terms of solution, we determine the parametric representation of a line of curvature which is relatively normal-slant helix, with respect to standard frame in Euclidean 3-space. Thereafter, we apply this result to find the position vector of a line of curvature which is isophote curve.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1995년도 추계 학술대회논문집
• /
• pp.132-137
• /
• 1995

Numerical analysis is conducted on the deformation of free surface of magnetic fluid. Steady magnetic fields are induced by a circular current loop. Governing equations of magnetic fields are solved by using the concept of vector potential. The free surface of magnetic fluid is formed by the balance of surface force, gravity, pressure difference, magnetic normal pressure and magnetic body force. The deformations of free surface of magnetic fluid are qualitatively clarified. And, the patterns of steady non-uniform magnetic fields induced by a circular current loop are quantitatively presented.