• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.162-169
• /
• 2014

The analysis and comparation of the half-coiled short-pitch windings with different phase belt are presented in the paper. The half-coiled short-pitch windings can supply the odd and even harmonics simultaneously, which can be applied in multiphase bearingless motor (MBLM). The space harmonic distribution of the half-coiled short-pitch windings with two kinds of phase belt is studied wi th respect to different coil pitch, and the suitable coil pitch can be selected from the analysis results to reduce the additional radial force and torque pulse. The two kinds of half-coiled short-pitch windings are applied to the five- and six-phase bearingless motor, and the comparation from the Finite Element Method (FEM) results shows that the winding with $2{\pi}/m$ phase belt is fit for the five phase bearingless motor and the winding with ${\pi}/m$ phase belt is suitable for the six phase bearingless motor. Finally, a five phase surface-mounted permanent magnet (PM) bearingless motor is built and the experimental results are presented to verify the validity and feasibility of the analysis. The results presented in this paper will give useful guidelines for design optimization of the MBLM.

• The Journal of Korean Physical Therapy
• /
• 제23권2호
• /
• pp.85-90
• /
• 2011

Purpose: The contribution of the supplementary motor area (SMA) to the control of voluntary movement has been revealed. We investigated the changesin the SMA for motor learning of the reaching movement in stroke patient using functional MRI. Methods: The subject was a right-handed 55 year-old woman with left hemiparesis due to an intracerebral hemorrhage. She performed reaching movement during fMRI scanning before and after reaching training in four weeks. The motor assessment scale and surface EMG were used to evaluate the paretic upper limb function and muscle activation. Results: In the fMRI result, contralateral primary sensorimotor cortex (SM1) was activated before and after training. SMA was only activated after training. In addition, muscle activation of the paretic upper limb was similar to that of the unaffected upper limb after training. Conclusion: These findings suggest SMA is related to the execution of a novel movement pattern resulting in motor learning in stroke patients.

• The Journal of Korean Physical Therapy
• /
• 제24권1호
• /
• pp.7-14
• /
• 2012

Purpose: The purpose of this study was to investigate the effect of motor imagery on the onset time of the leg muscle and ankle injury score of patients with functional ankle instability. Methods: The study included 16 patients with ankle instability after their ankle sprains. Motor imagery was performed 3 times a week for 4 weeks. The onset time of leg muscles was measured by using the surface EMG in one leg standing position on tibialis anterior, peroneous longus and medial, lateral gastrocnemius. The pre- and post-intervention was measured by using the ankle injury score. Data was analyzed by a paired t-test. Results: The onset time was reduced but there was no significant difference (p>0.05). The order of muscle recruitment was changed. Anke injury score increased significantly after motor imagery (p<0.05). Conclusion: The results suggest that motor imagery was effective by showing delayed onset time of peroneal muscle in patients with functional ankle instability. In future studies, various conditions and disorders should all be considered for the effective analysis of motor imagery.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.494-499
• /
• 2007

The thermal reliability of the closed-type BLDC motor for the high speed axial fans is analyzed by a numerical method in this dissertation. Since the module and the motor part are combined in a closed case, the heat generated from a rotor in the motor and the electronic components in the PCB module can not be effectively removed to the outside. Therefore the module will easily fail by high temperature. The accelerated-life testing was accomplished to formulate the life equation and numerical method is used to predict the inside temperature of the PCB module, which is one of the life equation parameter according to the environment. The experiment for measuring the surface heat flux of the electronic components is carried out to apply the boundary condition of numerical study. When the environment temperature of BLDC motor is 21, 35 and $50^{\circ}C$, the temperature in the PCB space is predicted as 73.4, 87.5 and $102.4^{\circ}C$. Then the life time with the temperature are calculated as 2,239, 863 and 328.

• 한국추진공학회지
• /
• 제20권6호
• /
• pp.29-37
• /
• 2016

본 논문에서는 유한요소해석을 이용하여 복합재 연소관의 금속 보스에 대한 형상 최적설계기법을 제안하였다. 복합재 연소관의 구조 안전성을 위해 연소관 내압에 의한 돔 부위의 섬유응력과 보스 체결 볼트의 응력을 제한하였고, 경량화를 위해 보스의 무게를 목적함수로 설정하였다. 또한 반응표면법을 이용하여 특성치에 대한 반응표면모델을 구축하였다. 그리고 분산분석을 이용해 각 특성치에 대한 설계변수의 유의성을 평가하고 회귀분석을 통해 구축된 모델의 적합성을 검증하였다. 최적화를 위해 순차이차계획법 알고리즘을 이용하였고, 도출된 최적형상에 대한 구조해석을 수행함으로써 제안한 기법의 효용성을 검증하였다.

• 산업경영시스템학회지
• /
• 제47권2호
• /
• pp.1-9
• /
• 2024

New motor development requires high-speed load testing using dynamo equipment to calculate the efficiency of the motor. Abnormal noise and vibration may occur in the test equipment rotating at high speed due to misalignment of the connecting shaft or looseness of the fixation, which may lead to safety accidents. In this study, three single-axis vibration sensors for X, Y, and Z axes were attached on the surface of the test motor to measure the vibration value of vibration. Analog data collected from these sensors was used in classification models for anomaly detection. Since the classification accuracy was around only 93%, commonly used hyperparameter optimization techniques such as Grid search, Random search, and Bayesian Optimization were applied to increase accuracy. In addition, Response Surface Method based on Design of Experiment was also used for hyperparameter optimization. However, it was found that there were limits to improving accuracy with these methods. The reason is that the sampling data from an analog signal does not reflect the patterns hidden in the signal. Therefore, in order to find pattern information of the sampling data, we obtained descriptive statistics such as mean, variance, skewness, kurtosis, and percentiles of the analog data, and applied them to the classification models. Classification models using descriptive statistics showed excellent performance improvement. The developed model can be used as a monitoring system that detects abnormal conditions of the motor test.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권4호
• /
• pp.184-189
• /
• 2004

In this paper, multi-object optimization based on a progressive quadratic response surface method (PQRSM) and a time stepping finite element method (FEM) is proposed. The new PQRSM and FEM are able to decide optimal geometric and electric variables of the switched reluctance motor (SRM) with two objective functions: torque ripple minimization and average torque maximization. The result of the optimum design for SRM demonstrates improved performance of the motor and enhanced relationship between torque ripple and average torque.

• Tribology and Lubricants
• /
• 제27권5호
• /
• pp.249-255
• /
• 2011

Recently the demand for a fast and precise actuator in semiconductor industries is growing larger. A SAW motor is now expected as a new friction-drive actuator to meet such demand. However, its friction and wear properties are almost unknown and its low stability and reliability still remain to be solved. In this research the tests of SAW motor were carried out and its durability was discussed. The effect of wear caused by friction on the driving force and driving speed were clarified.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.282-285
• /
• 2003

Two criteria of good vehicle suspension performance are typically their ability to provide good road handling and increased passenger comfort. So far, The existing active vehicle suspension uses pneumatic and hydraulic actuators that enhance road handling and passenger comfort. But these kinds of actuators have nonlinear characteristic less than an electromagnetic motor. In this research, we are trying to examine the feasibility and the experiment of an active vehicle suspension using electromagnetic motor in order to enhance the ride quality because existing active vehicle suspension using active power sources such as compressors, hydraulic pumps has nonlinear characteristic. Active vehicle suspension using electromagnetic motor will have the ability to behave differently on smooth and rough roads. The desired response should be soft in order to enhance ride comfort, but when the road surface is too rough the suspension should stiffen up to avoid hitting its limits.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.315-317
• /
• 2002

The value of I$_{c}$(critical current) in HTS (High Temperature Superconducting) tape has a great influence on B(equation omitted) (magnetic field amplitude applied perpendicular to the tape surface). Therefore, I$_{c}$ of HTS magnet is determined by not only operating temperature but also the B(equation omitted). In shape design of field coil for the HTS motor, a method to reduce the B(equation omitted) and to determine operating current should be considered in order to optimal design. On the basis of the magnetic field analysis, this paper deals with various field coil shape to obtain operating current of HTS motor by using analytical method. And also this paper discusses the operating current of 100hp class HTS motor by using I$_{c}$-B(equation omitted) curve.curve.