• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.1
• /
• pp.35-52
• /
• 1973

Red Yellow Soils occur very commonly in Korea and constitute the important upland soils of the country which are either presently being cultivated or are suitable for reclaiming and cultivating. These soils are distributed on rolling, moutain foot slopes, and terraces in the southern and western parts of the central districts of Korea, and are derived from granite, granite gneiss, old alluvium and locally from limestone and shale. This report is a summary of the morphology, physical and chemical characteristics of Red Yellow Soils. The data obtained from detailed soil surveys since 1964 are summarized as follows. 1. Red-Yellows Soils have an A, Bt, C profile. The A horizon is dark colored coarse loamy or fine loamy with the thin layer of organic matter. The B horizon is dominantly strong brown, reddish brown or yellowish red, clayey or fine loamy with clay cutans on the soil peds. The C horizon varies with parent materials, and is coarser texture and has a less developed structure than the Bt horizon. Soil depth, varied with relief and parent materials, is predominantly around 100cm. 2. In the physical characteristics, the clay content of surface soil is 18 to 35 percent, and of subsoil is 30 to 90 percent nearly two times higher than the surface soil. Bulk density is 1.2 to 1.3 in the surface soil and 1.3 to 1.5 in the subsoil. The range of 3-phase is mostly narrow with 45 to 50 percent in solid phase, 30 to 45 percent in liquid one, and 5 to 25 percent in gaseous state in the surface soil; and 50 to 60 solid, 35 to 45 percent liquid and less than 15 percent gaseous in the subsoil. Available soil moisture capacity ranges from 10 to 23 percent in the surface soil, and 5 to 16 percent in the subsoil. 3. Chemically, soil reaction is neutral to alkaline in soils derived from limestone or old fluviomarine deposits, and acid to strong acid in other ones. The organic matter content of surface soil varying considerably with vegetation, erosion and cultivation, ranges from 1.0 to 5.0 percent. The cation exchange capacity is 5 to 40 me/100gr soil and closely related to the content of organic matter, clay and silt. Base saturation is low, on the whole, due to the leaching of extractable cations, but is high in soils derived from limestone with high content of lime and magnesium. 4. Most of these soils mainly contain halloysite (a part of kaolin minerals), vermiculite (weathered mica), and illite, including small amount of chlorite, gibbsite, hematite, quartz and feldspar. 5. Characteristically they are similar to Red Yellow Podzolic Soils and a part of Reddish Brown Lateritic Soils of the United States, and Red Yellow Soils of Japan. According to USDA 7th Approximation, they can be classified as Udu Its or Udalfs, and in FAO classification system to Acrisols, Luvisols, and Nitosols.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.2
• /
• pp.221-225
• /
• 2008

The objective of the study was to examine the distinct qualities of Dasik containing added silkworm powder. In order to discern the differences in characteristics among samples the silkworm powder was added as at ratios of (0%, 10%, 20%, 30% and 40%), respectively. Measurements for moisture, chromaticity and mechanical and physical properties were performed, in addition to sensory evaluations. The results were as follows. The moisture contents of the Dasik samples changed as the added silkworm powder content increased. A lower L-value resulted as the amount of silkworm powder increased (p<0.05), the a and b values also showed decreasing tendencies. In the texture analysis, hardness increased as the amount of added silkworm powder increased from 0% to 40% (p<0.05). Adhesiveness was highest in the 40% silkworm powder group, and the 30% and 20% groups had the highest springiness values respectively (p<0.05). In terms of sensory quality overall surface color, texture and taste were perceived as superior for the 30% and 20% add silkworm powder groups gumminess was lowest for the 0% group (p<0.05), and overall quality was lowest for the 40% added silkworm powder group. Consequently, there was greater preference for the samples containing less than 40% added silkworm powder, and the 30% treatment had the best overall quality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.3
• /
• pp.359-366
• /
• 1993

Molds are eucaryotic, multicellular, multinucleate, filamentous organisms that reproduce by forming asexual and sexual spores. The spores are readily spread through the air and because they are very light-weight and tend to behave like dust particles, they are easily disseminated on air currents. Molds therefore are ubiquitous organisms that are found everywhere, throughout the environment. The natural habitat of most molds is the soil where they grow on and break down decaying vegetable matter. Thus, where there is decaying organic matter in an area, there are often high numbers of mold spores in the atmosphere of the environment. Molds are common contaminants of plant materials, including grains and seeds, and therefore readily contaminate human foods and animal feeds. Molds can tolerate relatively harsh environments and adapt to more severe stresses than most microorganisms. They require less available moisture for growth than bacteria and yeasts and can grow on substrates containing concentrations of sugar or salt that bacteria can not tolerate. Most molds are highly aerobic, requiring oxygen for growth. Molds grow over a wide temperature range, but few can grow at extremely high temperatures. Molds have simple nutritional requirements, requiring primarily a source of carbon and simple organic nitrogen. Because of this, molds can grow on many foods and feed materials and cause spoilage and deterioration. Some molds ran produce toxic substances known as mycotoxins, which are toxic to humans and animals. Mold growth in foods can be controlled by manipulating factors such as atmosphere, moisture content, water activity, relative humidity and temperature. The presence of other microorganisms tends to restrict mold growth, especially if conditions are favorable for growth of bacteria or yeasts. Certain chemicals in the substrate may also inhibit mold growth. These may be naturally occurring or added for the purpose of preservation. Only a relatively few of the approximately 100,000 different species of fungi are involved in the deterioration of food and agricultural commodities and production of mycotoxins. Deteriorative and toxic mold species are found primarily in the genera Aspergillus, Penicillium, Fusarium, Alternaria, Trichothecium, Trichoderma, Rhizopus, Mucor and Cladosporium. While many molds can be observed as surface growth on foods, they also often occur as internal contaminants of nuts, seeds and grains. Mold deterioration of foods and agricultural commodities is a serious problem world-wide. However, molds also pose hazards to human and animal health in the form of mycotoxins, as infectious agents and as respiratory irritants and allergens. Thus, molds are involved in a number of human and animal diseases with serious implication for health.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.4
• /
• pp.526-534
• /
• 2011

Cold air drying was conducted on steamed chestnut-sweet potato to improve its quality, convenience, and preference as snack. Steamed sweet potato was dried from 10 to $25^{\circ}C$ for 48 hours, and moisture contents, colors, texture, and taste were evaluated. The lowest moisture content was 4.53% at $25^{\circ}C$. Lightness decreased while other color values (a, b, and ${\Delta}$E) increased with increasing drying temperature and drying time. Reducing sugar and soluble solid contents ranged from 93.22~190.35 mg/g and 17~60 $^{\circ}Brix$, respectively. The highest hardness of chestnut-sweet potato was 25.13 kgf/$cm^2$, and springiness and cohesiveness were 88.60, and 94.87%, respectively, when dried at $25^{\circ}C$ for 48 hours. Sensory evaluation score was highest at $20^{\circ}C$ for 24 hours. The optimum drying conditions were determined to be $19^{\circ}C$ and 39.5 hours by RSM(response surface methodology).

• Journal of the Korean Society of Food Culture
• /
• v.17 no.1
• /
• pp.70-77
• /
• 2002

Jangachi(salted and fermented vegetable) has been made by Korean traditionally using several kinds of vegetables, which is a good source of variety of nutrients and vitamins. There are many methods for making Jangachi. Generally soy sauce Jangachi is made through two steps. First, as a pretreatment, vegetables are soaked in salt water. Second, soaked vegetables are fermented in various ingredients like soy sauce, sugar, garlic, ginger and so on. This study was performed to observe changes in contents of chemical components and sensory evaluation of pretreated perilla leaf. Perilla leaf was soaked in water with different levels of salt concentration(2, 5 and 8 %) and soaking time(1, 3 and 5 days). The optimal level of salt and soaking time was determined with the results of sensory evaluation by response surface methodology and analysis of composition. The moisture contents decreased as the levels of salt and soaking time increased. The moisture content of untreated sample was 87.5 % and when soaked for 5 days in the water of 8 % salt concentration, it became 78.27 %. pH of Perilla leaf was high in high levels of salt concentration and short soaking time. Total acidity was so opposite to pH that was low in high levels of salt concentration and short soaking time. In the water of 8 % salt concentration, total acidity was 0.14 % when soaked for 1 day, 0.20 % for 3 days and 0.30 % for 5 days. Salt contents became greater as the soaking time increased. As the results of puncture test, soaked Perilla leaf's toughness increased as the levels of salt increased and soaking time decreased. Among the sensory attributes, greenness increased as the levels of salt concentration increased when soaked for more than 3 days. Saltiness and bitterness became greater as the levels of salt concentration increased. Perilla flavor decreased with the short soaking time. Off-flavor increased with the increased levels of soaking time and decreased salt concentration when soaked for more than 3 days. Toughness decreased as the levels of soaking time increased. Crispness increased with the increased levels of salt concentration. The condition of pretreated Perilla was optimum when it soaked for 42 hours in 4 % salt concentration.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.1
• /
• pp.173-180
• /
• 2000

To determine the effect of base curve and diameter of soft contact lenses on the fitting under the various corneal curvature, the model eyes which was made of either stainless steel or ordinary wood, were used as the substitutes for human eyes. The evaluations of fit of the soft contact lenses on both wood model eyes and human eyes were found to be very similar to each other. All the contact lenses except very thin ones became flat after fit on the stainless steel model eyes because the model eye could not preserve enough moisture to hold the edge of contact lenses on the steel ball's surface. The relationships between the base curves of contact lenses and radii of cornea for the optimum (normal) fit were measured as follows : corneal curvature (C.C)<7.6 mm : base curve(B.C) 8.4 mm, C.C 7.6~7.8 mm : B.C 8.4~8.5 mm. C.C 7.8~8.1 mm : B.C 8.6 mm. It is concluded that larger base curve is required for the eyes which have abnormal bulge on its cornea. It is found that very thin soft contact lenses can be easily twisted or folded regardless of moisture content when they were fit on the relatively dry eyes(corneas).

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.17-26
• /
• 2010

Recently, yellow poplar (Liriodendron tulipifera L.) is getting attention in Korea due to the fast growing and high yield and quality of lumber. But, it is thought that the color difference between heartwood and sapwood may restrict the practical use of it. This study was aimed to enhance the value of yellow poplar lumber by the color control using high temperature heat-treatment, which had been tried for domestic cedar (Kim et al., 2009). The material properties including surface color of yellow poplar lumber were evaluated according to heat treatment conditions. The difference of color between sapwood and heartwood could be reduced by heat treatment at a temperature about $200^{\circ}C$. Long heating time was more effective in reducing the difference. The Equilibrium Moisture Content (EMC) of heat-treated wood was as low as 50 percent of the control. The result obviously indicates that heat-treated wood is more dimensionally stable in the change of moisture condition. The durability against wood rotting fungi also increased by the heat-treated, but it was not so effective as the case of cedar. The changes of mechanical properties of heat-treated yellow poplar were very similar to that of heat-treated cedar. In order to develop new use of heat-treated yellow poplar, the changes of mechanical properties should be considered. There were no significant changes in microscopic structure which may cause changes in mechanical properties. Further study of heat-treated wood is needed to scrutinize the causes of changes of material properties.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.192-199
• /
• 2009

This study was carried out to investigate the performance of a radio-frequency/vacuum dryer combined with a mechanical compressive load (RF/VC) with a scale of about $3m^3$ during drying board of Azobe (Lophira alata) and Korean red pine (Pinus densiflora). The degree of vacuum of the RF/VC system was maintained at 80~105 torr, and wood temperature was increased from $40^{\circ}C$ at the beginning of drying to $60^{\circ}C$ at the end of drying and the radiofrequency generator was operated with schedule of 7 minute-ON and 3 minute-OFF. The wood temperatures near charge plate always remained higher than those of the control during all of the drying stage, whereas the wood temperature near ground plate always remained lower than those of the controlled. As drying time proceeding, the temperature of the wood near ground plate presented lower than those of the control. Whereas the temperature of the wood near charge plate presented higher than those of the controlled. The final average moisture contents of the Azobe boards stacked near the input side of the RF generator showed slightly lower than those near the opposite side. Those of the wood stacked in the layers near the charge plate were lower than those of near the ground plate. The average length of surface checks of the Azobe boards stacked near the charge plate was very slight, whereas that toward the ground plate represented high values. The efficiency of input energy was simliar with the commercial systems.

• Korean Journal of Plant Resources
• /
• v.30 no.1
• /
• pp.78-87
• /
• 2017

This study was compared to outdoor field (OF) and rain shelter greenhouse (RSG) according to cultivation type of Gastrodia elata Blume. Also, the effects of yield and quality for mulching materials in RSG were compared. The yield of G. elata was investigated good merchantable quality, and the quality was investigated hardness, chromaticity, weight loss and the contents of the major functional components. The cultivation of RSG was increased the yield, hardness, gastrodin, and vanillyl alcohol compared to OF, and the weight loss, chromaticity, and ergothioneine were almost equal. Rice straw treatment showed higher than those of the control and other treatments on the yield and hardness. As a result, the yield and the quality of RSG, which can control the soil moisture, were better than that of OF. And the lower the soil moisture content according to the mulching material, the harder the surface and the higher the hardness.

• Culinary science and hospitality research
• /
• v.18 no.5
• /
• pp.267-278
• /
• 2012

The purpose of this study was to investigate the quality characteristics of Sulgidduck made with commercial dry rice powder, providing an optimal milk ratio and soaking time for dry powder in water to make Sulgidduck using dry rice powder. The Sulgidduk samples with dry rice powder were prepared with two soaking times (0, 30 min) and different amounts of milk (0, 20, 40, 60%), and analyzed for moisture content, Hunter's color value, texture characteristics and sensory evaluation. The moisture content of the samples ranged from 36.37% to 39.80% and the highest moisture quantity was showed in the group with 20% of milk and 30min of soaking time(SM20). The L-value was the highest in the group with 20% of milk and 0min of soaking time(M20). The b-value was increased with the amount of milk and soaking time increased, showing the highest in the group with 60% of milk and 30min of soaking time(SM60). TPA showed that SM20 had the lowest hardness and the highest adhesiveness. Chewiness, gumminess and cohesiveness were the highest in the group with 60% of milk and 0min of soaking time(M60). Based on quantitative descriptive sensory evaluations, the score of white color and moistness was showed high in the group with 0% of milk and 0min of soaking time(M0), and white powder on the surface was shown the most in the group with 20% of milk and 30min of soaking time(SM20). The score of moistness, springiness and chewiness were highest in the group with 20% of milk and 0min of soaking time(M20). Sulgidduk made with 20% of milk and 0min of soaking time(M20) was the most preferable in color, flavor, taste, and overall acceptability.