• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.93-99
• /
• 2016

The present study aims to increase the amount of surface flux by changing the magnetic directions of a spherical magnet (NdFeB) consisting of four poles. For this purpose, the magnetic directions of quartile spherical slices constituting the spherical magnet are manipulated and their three-dimensional analyses are carried out by using finite-element method via Maxwell environment. The analysis of the magnetic quartile spheres with four different magnetic directions are compared to the each other, and then the quartile sphere with the best surface flux distribution is suggested for rotor structure. It is clear emphasized that the induced torque of the spherical motor, in which such a rotor is used, will be improved as well.

• Journal of Magnetics
• /
• v.17 no.2
• /
• pp.109-114
• /
• 2012

The torque characteristics of a surface-mounted permanent magnet synchronous motor (SPMSM) are analyzed in this study. The harmonics of the back electromotive force (EMF) and cogging torque are analyzed by the finite element method to study their effects on the torque ripple. Although low cogging torque can be achieved by varying geometric parameters such as the permanent magnet (PM) offset and notch depth on the stator teeth, the torque ripple is increased in some cases. The analysis results show that the ripple of the generated torque is determined by not only the amplitudes but also the phases of harmonics for the back EMF and cogging torque.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.1
• /
• pp.38-44
• /
• 2015

This paper presents the sensorless drive method for mono inverter dual parallel (MIDP) surface mounted permanent magnet synchronous motor (SPMSM) drive system. MIDP motor drive system is a technique that can reduce the cost of the multi motor driving system. To maximize this merit of the MIDP motor drive system, the sensorless technique is essential to eliminate the position sensors. This paper adopts an appropriate sensorless method for MIDP SPMSM drive system, which uses the reduced order observer and phase locked loop (PLL) to reduce the calculation burden. The I-F control method is implemented for start-up and low speed operation. The validity and performance of the proposed algorithm are shown via experiments with 600-W SPMSMs.

• Journal of Magnetics
• /
• v.20 no.4
• /
• pp.413-420
• /
• 2015

In this study, we present a comparison of multistage axial flux permanent-magnet machines (AFPMs) with different topologies for use as 100 W-class portable generating systems. Three topologies were selected, and the maximum power density and high level of efficiency were achieved by following the response surface methodology (RSM) in the design. Three-dimensional finite element analysis (FEA) was used to conduct numerical experiments to obtain the optimum design using the RSM and suggest a proper configuration of the portable generating system.

• Journal of Magnetics
• /
• v.20 no.4
• /
• pp.387-393
• /
• 2015

Torque ripple is necessarily generated in interior permanent magnet synchronous motors (IPMSMs) due to the non-sinusoidal distribution of flux density in the air gap and the magnetic reluctance by stator slots. This paper deals with an asymmetric rotor shape to reduce torque ripple which can make sinusoidal flux density distribution in the air gap. Meanwhile the average torque is relatively increased by the asymmetric rotor. Response surface method (RSM) is applied to find the optimum position of the permanent magnets for the IMPSM with improved torque performance. Consequently, an asymmetric structure is the result of RSM and the structure has disadvantage of a mechanical stiffness. Finally, the performance of suggested shape is verified by finite element analysis and structural analysis is conducted for the mechanical stiffness.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.740-741
• /
• 2015

This paper presents the design and dynamic analysis of surface-mounted type variable flux permanent magnet(VFPM) machines. VFPM machines with a low-coercive-force (LCF) magnetic material have been studied extensively for their potential to improve the efficiency and extend the flux-weakening range of permaennt magnet (PM) machines. In order to implement the design of the VFPM machines effectively, we perform a characteristic analysis of the LCF magnet with respect to design parameters. The analysis results of the designed VFPM machines are compared with measured results, and the validity of the design of the VFPM machines is confirmed.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.3B no.2
• /
• pp.84-89
• /
• 2003

The finite element method (FEM) is typically used in the process of motor design. However, the FEM requires computation time, Therefore, decreasing the number of FEM simulations may also decrease the simulation cost. Several optimal design methods overcoming this problem have been recently studied. This paper investigates the optimal design of the magnet pole of a BLDC motor through reducing simulation cost. The optimization minimizes the magnet volume and limits the average and cogging torques to certain values. In this paper, the response surface methodology and Taguchi's table for reducing the number of FEM simulations are used to approximate two constraints. The optimization result shows that the presented strategy is satisfactorily performed.

• Journal of Magnetics
• /
• v.15 no.1
• /
• pp.36-39
• /
• 2010

The multi-degrees of freedom surface permanent-magnet motor (Multi-D.O.F. SPM) has several degrees of freedom operations that are defined as the "roll", "yaw", and "pitch". Normally, the torque that is generated to rotate a rotor includes ripples. The analysis of the torque ripples is important for improving motor performance. In terms of the electric analysis, torque ripple occurs as a result of many factors, including the rotor and stator structures, the distribution of the air-gap flux density, and the waveform of the current in the coils. In particular, the torque ripple is an important factor in the stable operation of the Multi-D.O.F. SPM. Therefore, in this work, the torque ripple was analyzed using various types of magnetization for the permanent magnet. An improved model was proposed for the Multi-D.O.F. SPM based on this analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.759-765
• /
• 2011

This paper proposes an effective assistant model for considering the stator slot-opening effect on air gap flux density distribution in conventional interior-type permanent magnet (IPM) motor. Different from the conventional slot-opening effect analysis in surface-type PM (SPM) motor, a composite effect of slot-opening uniquely existing in IPM motor, which additionally causes enhancement of air gap flux density due to magnet flux path distortion in iron core between the buried PM and rotor surface. This phenomenon is represented by a proposed assistant model, which simply deals with this additional effect by modifying magnetic pole-arc using an effective method. The validity of this proposed analytical model is applied to predict the air gap flux density distribution in an IPM motor model and confirmed by finite element method (FEM).

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.1
• /
• pp.1-8
• /
• 2006

Now a day, owing to high efficiency and easy speed control of brushless DC(BLDC) motor, the demand of BLDC motor that has high power and low noises are increasing. Especially demand of interior permanent magnet(IPM) BLOC with high efficiency and high power in electric motion vehicle is increasing. IPM BLDC motor has permanent magnets in the rotor. Because it has two different flux paths, magnetic reluctance differences are generated in d-axis and q-axis. As the result of the inductance differences that are generated by the saliency(magnetic reluctance differences) in the rotor, the motor has structure advantage that has the additional reluctance torque except a magnet torque and because magnet is situated inside the rotor, the mechanical structure is strong. Therefore IPM BLDC motor makes possible to have high speed and high power. This paper presents a design and characteristics analysis of IPM BLDC motor for electric vehicle. To design IPM BLDC motor, surface mounted permanent magnet(SPM) BLDC motor is used as the initial design model. According to the shape-ratio() of permanent magnet, the characteristic of IPM BLDC motor is analyzed by Finite element method (FEM). Characteristics analysis results of the designed motor are compared with the experimental results.