• Macromolecular Research
• /
• 제14권2호
• /
• pp.205-208
• /
• 2006

A polymeric film of a biodegradable poly(1,5-dioxepan-2-one) (PDXO) was formed on a gold surface by a combination of the formation of self-assembled monolayers (SAMs) presenting hydroxyl groups and the surface-initiated, ring-opening polymerization (SI-ROP) of 1,5-dioxepan-2-one (DXO). The SI-ROP of DXO was achieved by heating a mixture of $Sn(Oct)_2$, DXO, and the SAM-coated substrate in anhydrous toluene at $55^{\circ}C$. The resulting PDXO film was quite uniform. The PDXO film was characterized by polarized infrared external reflectance spectroscopy, X-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectrometry, atomic force microscopy, ellipsometry, and contact angle goniometry.

• 한국환경과학회지
• /
• 제23권8호
• /
• pp.1419-1428
• /
• 2014

Electron beam-induced grafting polymerization was employed to prepare Acrylic acid-grafted bacterial cellulose (BC-g-AAc). BC-g-AAc as an adsorbent was applied to remove heavy metals (e.g., As, Pb, and Cd). This study examined followings; morphological change of surface, adsorptive behavior of BC-g-AAc, and interpretation of adsorptive kinetics. Specific surface areas of BC and BC-g-AAc were $0.9527m^2g^{-1}$ for BC and $0.2272m^2g^{-1}$ for BC-g-AAc, respectively as measured by BET nitrogen adsorption, revealing the morphological change of the surface of BC-g-AAc. Batch adsorption test was performed to investigate adsorptive behavior of BC-g-AAc in aqueous solution. The amounts of Pb and Cd adsorbed on BC-g-AAc were $69mg\;g^{-1}$ and $56mg\;g^{-1}$, respectively. However, As was not adsorbed on BC-g-AAc due to its neutral nature. Both the Benaissa model and the Kurniawan model were applied in the study to interpret adsorptive kinetics. From the value of correction coefficient ($R^2$), adsorptive kinetics of Pb and Cd were subjected to Kurniawan model referred to pseudo-second-order. Taken together, the results of this study show that BC-g-AAc has potential as a heavy metal (eg., Pb, Cd)-adsorbent made of an environmentally friendly material.

• Macromolecular Research
• /
• 제14권5호
• /
• pp.552-558
• /
• 2006

Biodegradable nanofibrous poly(L-lactic acid) (PLLA) scaffold was prepared by an electrospinning process for use in tissue regeneration. The nanofiber scaffold was treated with oxygen plasma and then simultaneously in situ grafted with hydrophilic acrylic acid (AA) to obtain PLLA-g-PAA. The fiber diameter, pore size, and porosity of the electrospun nanofibrous PLLA scaffold were estimated as $250\sim750nm,\;\sim30{\mu}m$, and 95%, respectively. The ultimate tensile strength was 1.7 MPa and the percent elongation at break was 120%. Although the physical and mechanical properties of the PLLA-g-PAA scaffold were comparable to those of the PLLA control, a significantly lower contact angle and significantly higher ratio of oxygen to carbon were notable on the PLLA-g-PAA surface. After the fibroblasts were cultured for up to 6 days, cell adhesion and proliferation were much improved on the nanofibrous PLLA-g-PAA scaffold than on either PLLA film or unmodified nanofibrous PLLA scaffold. The present work demonstrated that the applications of plasma treatment and hydrophilic AA grafting were effective to modify the surface of electrospun nanofibrous polymer scaffolds and that the altered surface characteristics significantly improved cell adhesion and proliferation.

• 폴리머
• /
• 제37권5호
• /
• pp.649-655
• /
• 2013

방사선 그래프팅 방법을 이용하여 다공성 PTFE 지지체에 친수성 고분자 사슬인 아크릴산 사슬을 도입시켜 강화 복합 연료전지막의 지지체로 사용하기 위한 PTFE 친수화 다공성 지지체를 제조하였고 FTIR을 이용하여 다공성 PTFE에 친수성 고분자가 성공적으로 도입되었음을 확인하였다. 제조된 지지체의 표면 친수화 정도를 관찰하기 위해 접촉각을 측정한 결과, 도입된 친수성 고분자 사슬이 증가할수록 소수성의 PTFE 표면 친수화도가 증가됨을 확인하였다. 또한 제조된 지지체의 물리화학적, 형태학적 특성은 FE-SEM, gurley number, 인장강도를 측정하여 관찰하였다.

• Membrane and Water Treatment
• /
• 제1권2호
• /
• pp.103-120
• /
• 2010

Surface modification of microfiltration and ultrafiltration membranes has been widely used to improve the protein adsorption resistance and permeation properties of hydrophobic membranes. Several surface modification methods for converting conventional membranes into low-protein-binding membranes are reviewed. They are categorized as either physical modification or chemical modification of the membrane surface. Physical modification of the membrane surface can be achieved by coating it with hydrophilic polymers, hydrophilic-hydrophobic copolymers, surfactants or proteins. Another method of physical modification is plasma treatment with gases. A hydrophilic membrane surface can be also generated during phase-inverted micro-separation during membrane formation, by blending hydrophilic or hydrophilic-hydrophobic polymers with a hydrophobic base membrane polymer. The most widely used method of chemical modification is surface grafting of a hydrophilic polymer by UV polymerization because it is the easiest method; the membranes are dipped into monomers with and without photo-initiators, then irradiated with UV. Plasma-induced polymerization of hydrophilic monomers on the surface is another popular method, and surface chemical reactions have also been developed by several researchers. Several important examples of physical and chemical modifications of membrane surfaces for low-protein-binding are summarized in this article.

• Journal of Periodontal and Implant Science
• /
• 제29권3호
• /
• pp.469-484
• /
• 1999

The purpose of this study was to evaluate new bone formation following guided bone regeneration by resorbable and nonresorbable membrane. Six adult mongrel dogs were used. The first, second, third, fourth premolars in the mandible of each dog were extracted. Two months after tooth extraction, a buccal dehiscence defect was surgically created on each edentulous area. The experimental sites were divided into three groups according to the treatment modalities ; Group I-a: surgical treatment only ; Group I -b: allogenic decalcified freezed dried bone grafting ; Group II-a : e- PTFE membrane placement only ; Group II-b : allogenic decalcified freezed dried bone grafting and e-PTFE membrane placement ; Group III-a : Vicryl(R) mesh placement only ; Group III-b : allogenic decalcified freezed dried bone grafting and Vicryl(R) mesh placement . The animals were sacrificed at 8 weeks after operation and the specimens were prepared for histologic and histometric examination. The results were as follows : Clinically, all defect sites were healed without exposure of barrier membrane after the eight weeks. In Group I-a, dense connective tissues were impinged in the bony defect area. Well vascularized and fibrous bone marrow indicated that bone formation was still taking place was found. In Group I-b, in areas closer to the periphery, lamellation of the newly formed bone would found. In Group II-a, beneath the e-PTFE membrane a dense layer of connective tissue covering the most external portions of the regenerated tissue was seen. The new bone surfaces were lined with osteoid and osteoblast. In Group II-b, a dense layer of connective tissue covering the most external portions of the regenerated tissue was observed beneath the e-PTFE membrane. A notable amount of alveolar ridge regeneration was seen with new rigdes with well-contoured form. In Group III-a, the new bone surface were lined with osteoid and osteoblast, indicating active bone formation. A clear demarcation could not be noted between the host bone and new bone. In Group III-b, a notable amount of alveolar ridge regeneration was seen with new ridges assuming wellcontoured form. In areas closer to the periphery, lamellation of the newly formed bone would found. As histometric examination, the amount of bone formation was gained from $12.8mm^2$ to $26.3mm^2$. It was significantly greater in group II-b and group III-b compared to other groups(p<0.05) . These results suggest that Vicryl(R) mesh after DFDB grafting used in guided bone regeneration could create and sustain sufficient space for new bone formation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.409-414
• /
• 2007

Wettability of solid surfaces with liquids is governed by the chemical properties and the microstructure of the surfaces. We report on the preparation of liquid-repellent surfaces using surface-attached monolayers of perfluorinated polymer molecules on porous silica substrates. A covalent attachment of the polymer molecules to the substrate is achieved by generation of the polymer chains through starting a surface-initiated radical-chain polymerization of a fluorinated monomer. To this, self-assembled monolayers of azo initiators are attached to silica substrates, which are used to kick off the polymerization reaction in situ. The growth of the fluorinated polymer films and the characterization of the obtained surfaces by surface plasmon spectroscopy, XPS, and contact angle measurements is described. It is shown that perfluorinated polymer films can be grown with controlled thicknesses on flat and even on porous silica surfaces, essentially without changing the surface roughness. The combination of the low surface energy coating and the surface porosity allows generation of materials which are both water and oil repellent.

• 대한의생명과학회지
• /
• 제17권4호
• /
• pp.329-336
• /
• 2011

The female has previously been shown to be an independent risk factor for mortality and morbidity after coronary artery bypass grafting surgery (CABG). The aim of this retrospective study is to evaluate gender differences of the perioperative outcomes in elderly patients underwent CABG. Data for seventy elderly patients (>70 years) that underwent CABG (between January 2005 and July 2011) were divided into two groups: male patients (n=33, male group) and female patients group (n=37, female group). Heights, body weights, body surface area and coronary artery obstruction rate (right coronary artery territory) in the female group were lower than those of the male group ($P$ <0.05). History of hypertension, hyperlipidemia, congestive heart failure and percutaneous coronary artery intervention in the female group was higher than that of the male group ($P$ <0.05). Total cholesterol and brain natriuretic peptide levels in the female group were higher than those of the male group ($P$ <0.05). Platelet count in the female group was higher than the male group at preoperative (Pre-OP) period ($P$ <0.05). Erythrocyte count, hematocrit and hemoglobin levels in the female group were lower than those of the male group at Pre-OP period ($P$ <0.05). But, erythrocyte count, hematocrit and hemoglobin levels in the female group were higher than those of the Male group at postoperative (Post-OP) period ($P$ <0.05). Left ventricular ejection fraction in the female group was higher than the male group at Post-OP period ($P$ <0.05). Hospital stay length in the female group was higher than the male group ($P$ <0.05). Post-OP bleeding volume and incidence of ventricular premature contraction in the female group were lower than those of the male group ($P$ <0.05). These results suggest that despite female gender have a greater risk factors and require a longer hospitalization than male, there was no significant difference incidence of mortality and complication.

• 폴리머
• /
• 제26권4호
• /
• pp.415-421
• /
• 2002

E-beam 전조사법을 이용하여 HPP-g-styrene 공중합체와 술폰화 반응을 통한 술폰화 HPP-g-styrene 섬유이온교환체를 합성하였다. 그라프트율은 스티렌 단량체 농도가 증가함에 따라 증가하였으며 스티렌 단량체 농도가 80%에서 그라프트율이 128%로 최대를 나타냈다. 술폰화율은 그라프트율이 증가함에 따라 증가하는 경향을 나타내었으며, 그라프트율이 100%일 때 13.4%로 최대값을 나타내었다. 술폰화 HPP-g-styrene 섬유이온교환체의 이온교환용량은 약 3.42 meq/g으로써 흡착 성능이 매우 우수한 소재임을 확인하였다. BET 분석결과 술폰화 HPP-g-styrene의 비표면적은 62.54 $m^2/g$, 기공크기는 25 $\AA$으로 반응전보다 비표면적은 감소하였고 기공크기는 약간 증가하는 경향을 보였다. 또한 Bovine Serum Albumin (BSA) 흡착 실험 결과 술폰화도가 증가함에 따라 BSA 흡착 용량이 증가하는 경향을 나타내었으며, 술폰화도 13.4%에서 BSA 흡착용량 3.8 mg/g으로 최대를 나타내었다. 따라서 본 연구에서 합성한 섬유이온교환체가 BSA 흡착.분리에 적합한 소재임을 확인하였다.

• Archives of Reconstructive Microsurgery
• /
• 제26권1호
• /
• pp.9-13
• /
• 2017

Purpose: Fingertip amputations are the most common type of upper limb amputations. Composite grafting is a simple and cost-effective technique. Although many factors have investigated the success of composite grafting, the success rate is not high. Therefore, this study was conducted to investigate whether the microscopic procedure process during composite grafts improves the success rate. Materials and Methods: Thirteen cases of unreplantable fingertip amputation underwent a microscopic resection procedure for composite graft in the operating room. The principle of the procedure was to remove the least devitalized tissue, maximize the clean tissue preservation and exact trimming of the acral vessel and to remove as many foreign bodies as possible. Results: All fingertips in the thirteen patients survived completely without additional procedures. Conclusion: Composite grafting allows for the preservation of length while avoiding the donor site morbidity of locoregional flaps. Most composite grafts are performed as quickly as possible in a gross environment. However, we take noticed the microscopic resection. This process is thought to increase the survival rate for the following reasons. First, the minimal resection will maximize the junction surface area and increase serum imbibition. Second, sophisticated trimming of injured distal vessels will increase the likelihood of inosculation. Third, accurate foreign body removal will reduce the probability of infection and make it possible to increase the concentration and efficiency in a microscopic environment. Although there is a need for more research into the mechanisms, we recommend using a composite graft under the microscopic environment.