• Tribology and Lubricants
• /
• v.24 no.5
• /
• pp.234-240
• /
• 2008

It is well known that surface texturing improves the tribological properties of mechanical components for enhancing hydro-dynamic effect or serving as a micro reservoir. There are not, however, enough researches to reveal the effects of surface texturing on the tribological properties under grease lubrication which is used in lubricating many mechanical elements. In the present study, therefore, the effects of surface texturing on the tribological properties are investigated under grease lubrication based on an experimental approach. The results show that surface texturing decreases friction coefficient. It is found that the friction coefficient can be decreased by controlling the diameter and density of micro-dimple. The diameter of dimple is more effective under high load and low speed than otherwise. And, the density of dimple is effective under low load and high speed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.184-189
• /
• 1998

In the CNC lathe working, the study of the effects of various cutting conditions on cut surface roughness is less active than that of the ordinary latee. After lathe working of SM45C, a carbon steel material for machine structure, its surface roughness was measured using a stylus surface roughness tester. In most cases, good surface roughness was obtained over 160m/min cutting speed and then the proper cutting depth was found as 1.0~1.5mm.

• Smart Structures and Systems
• /
• v.19 no.1
• /
• pp.105-113
• /
• 2017

A microstructure-dependent dynamic model for silicon nanobeams with axial motion is developed by considering the effects of nonlocal elasticity and surface energy. The nanobeam is considered to subject to both transverse and longitudinal loads arising from nanostructural surface effect and all positive directions of physical quantities are defined clearly prior to modeling so as to clarify the confusions of sign in governing equations of previous work. The nonlocal and surface effects are taken into consideration in the dynamic behaviors of silicon nanobeams with axial motion including circular natural frequency, vibration mode, transverse displacement and critical speed. Various supporting conditions are presented to investigate the circular frequencies by a numerical method and the effects of many variables such as nonlocal nanoscale, axial velocity and external loads on non-dimensional circular frequencies are addressed. It is found that both nonlocal and surface effects play remarkable roles on the dynamics of nanobeams with axial motion and cause the frequencies and critical speed to decrease compared with the classical continuum results. The comparisons of the non-dimensional calculation values by present and previous studies validate the correctness of the present work. Additionally, numerical examples for silicon nanobeams with axial motion are addressed to show the nonlocal and surface effects on circular frequencies intuitively. Results obtained in this paper are helpful for the design and optimization of nanobeam-like microstructures based sensors and oscillators at nanoscale with desired dynamic mechanical properties.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1324-1328
• /
• 2018

By employing ab-initio total-energy and electronic-structure calculations based on the density-functional theory, we studied the effects of surface strain ${\varepsilon}_s$ on the adsorption properties of a Au adatom on defective MgO(001) surfaces with surface oxygen vacancies ($F_s$ centers). The formation energy of the $F_s$ center on MgO(001) varied very slightly in the region of ${\varepsilon}_s$ from -6% to -4% and monotonically decreased with the increase in ${\varepsilon}_s$, from -4% to +6%. As ${\varepsilon}_s$ increased, the adsorption energy ($E^{Fs}_{ads}$) of Au on the $F_s$ center of strained MgO(001) monotonically decreased and, in particular, showed a much larger decrease in $E^{Fs}_{ads}$ for a tensile surface strain of ${\varepsilon}_s$ > +4%. The surface strain dependence on the physical properties, such as the charge states, the spatial charge rearrangement, for Au on the $F_s$ center of strained MgO(001) surfaces was also analyzed. These results provide important physical information on the effects of surface strain on the adsorption of Au on MgO(001) surfaces with $F_s$ centers.

• Advances in aircraft and spacecraft science
• /
• v.5 no.5
• /
• pp.581-594
• /
• 2018

This paper is the follow-on of a previous paper by the author where it was pointed out that the forthcoming, manned exploration missions to Mars, by means of complex geometry spacecraft, involve the study of phenomena like shock wave-boundary layer interaction and shock wave-shock wave interaction also along the entry path in Mars atmosphere. The present paper focuses the chemical effects both in the shock layer and on the surface of a test body along the Mars orbital entry and compares these effects with those along the Earth orbital re-entry. As well known, the Mars atmosphere is almost made up of Carbon dioxide whose dissociation energy is even lower than that of Oxygen. Therefore, although the Mars entry is less energized than the Earth re-entry, one can expect that the effects of chemistry on aerodynamic quantities, both in the shock layer and on a test body surface, are different from those along the Earth re-entry. The study has been carried out computationally by means of a direct simulation Monte Carlo code, simulating the nose of an aero-space-plane and using, as free stream parameters, those along the Mars entry and Earth re-entry trajectories in the altitude interval 60-90 km. At each altitude, three chemical conditions have been considered: 1) gas non reactive and non-catalytic surface, 2) gas reactive and non-catalytic surface, 3) gas reactive and fully-catalytic surface. The results showed that the number of reactions, both in the flow and on the nose surface, is higher for Earth and, correspondingly, also the effects on the aerodynamic quantities.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.647-652
• /
• 2015

A fully coupled finite element analysis (FEA) technique was developed for analyzing the discharge phenomena and dielectric liquid flow while considering surface charge density effects in dielectric flow guidance. In addition, the simulated speed of surface charge propagation was compared and verified with the experimental results shown in the literature. Recently, electrohydrodynamics (EHD) techniques have been widely applied to enhance the cooling performance of electromagnetic systems by utilizing gaseous or liquid media. The main advantage of EHD techniques is the non-contact and low-noise nature of smart control using an electric field. In some cases, flow can be achieved using only a main electric field source. The driving sources in EHD flow are ionization in the breakdown region and ionic dissociation in the sub-breakdown region. Dielectric guidance can be used to enhance the speed of discharge propagation and fluidic flow along the direction of the electric field. To analyze this EHD phenomenon, in this study, the fully coupled FEA was composed of Poisson's equation for an electric field, charge continuity equations in the form of the Nernst-Planck equation for ions, and the Navier-Stokes equation for an incompressible fluidic flow. To develop a generalized numerical technique for various EHD phenomena that considers fluidic flow effects including dielectric flow guidance, we examined the surface charge accumulation on a dielectric surface and ionization, dissociation, and recombination effects.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.525-530
• /
• 2000

The effects of vortex generators, in the form of small tabs projecting into the flow at the axisymmetric supersonic nozzle exit and triangular thin tapes attached on the inner surface at the nozzle exit, on the characterixtics of supersonic mixing enhancements are experimentally investigated. Delta-shaped tabs as small as 1% of the nozzle exit area produce strong counter-rotating vortices, and is found to produce significant effects on the jet flowfield downstream of the nozzle. The effects is larger on the under-expanded cases than over- and perfect-expanded cases. Nozzle inner surface roughness also can do a role of centerline pressure decay for highly under-expanded jet cases. The effects of the angle of tabs with respect to flow direction are also investigated.

• Smart Structures and Systems
• /
• v.20 no.5
• /
• pp.573-581
• /
• 2017

A vibrating double-layered nanoscale piezoelectric plate is developed accounting for the flexoelectricity and surface effects. The flexoelectricity is due to the coupling between electrical polarization and strain gradient. Applying Hamilton's principle, the governing equations and related boundary conditions are derived. Assuming suitable approximate functions, the governing equations are numerically solved for simply-supported and clamped boundary conditions. Obtained results indicate that both the flexoelectricity and surface effects possess notable impact on the vibration frequencies of the system. Only flexoelectricity yields a considerable difference between the present model and previous investigations on conventional piezoelectric nanoplates. Generally, a parametric study has been performed to examine the effects of surface elasticity, flexoelectricity, applied electric voltage, interlayer stiffness, geometrical parameters and boundary conditions on vibration frequencies of piezoelectric nanoplates.

• Structural Engineering and Mechanics
• /
• v.76 no.5
• /
• pp.619-629
• /
• 2020

In current study, surface/interface effects for pull-in voltage and viscous fluid velocity effects on dimensionless natural frequency (DNF) of fluid-conveying piezoelectric nanosensor (FCPENS) subjected to direct electrostatic voltage DC with nonlinear excitation, harmonic force and also viscoelastic foundation (visco-pasternak medium and structural damping) are investigated using Gurtin-Murdoch surface/interface (GMSIT) theory. For this analysis, Hamilton's principles, the assumed mode method combined with Lagrange-Euler's are used for the governing equations and boundary conditions. The effects of surface/interface parameters of FCPENS such as Lame's constants (λI,S, μI,S), residual stress (τ0I,S), piezoelectric constants (e31psk,e32psk) and mass density (ρI,S) are considered for analysis of dimensionless natural frequency respect to viscous fluid velocity u̅f and pull-in voltage V̅DC.

• Steel and Composite Structures
• /
• v.38 no.3
• /
• pp.293-304
• /
• 2021

The aim of this paper is to analyze the nonlinear bending of functionally graded (FG) curved nanobeams reinforced by carbon nanotubes (CNTs) in thermal environment. Chen-Yao's surface elastic theory and geometric nonlinearity are also considered. The nanobeams are subjected to uniform loadings and placed on three-parameter substrates. The Euler-Lagrange equations are employed to deduce the equations of equilibrium. Then, the asymptotic solutions and boundary value problems are analytically determined by utilizing the two-step perturbation technique. Finally, the effects of the surface parameters, geometric factors, foundation stiffness, volume fraction, thermal effects and layout type of CNTs on the nonlinear bending of the nanobeams are discussed.