• 한국전기전자재료학회논문지
• /
• 제13권8호
• /
• pp.704-710
• /
• 2000

Metal electrode materials for plasma display panel should have low electrical resistivity in order to maintain stable gas discharge and have fast response time. They should also hae good film uniformity adhesion and thermal stability. In this study Cr/Cu/Cr metal electrode structure is formed by DC magnetron sputtering. Cr and Cu films were deposited on ITO coated glasses with various DC power density and main pressures as the major parameters. After metal electrodes were formed a heat treatment was followed at 55$0^{\circ}C$ for 20 min in a vacuum furnace. The intrinsic stress of the sputtered Cr film passed a tensile stress maximum decreased and then became compressive with further increasing DC power density. Also with increasing the main pressure stress turned from compression to tension. After heat the treatment the electrical resistivity of the sputtered Cu film of 2${\mu}{\textrm}{m}$ in thickness prepared at 1 motor with the applied power density of 3.70 W/cm$^2$was 2.68 $\mu$$\Omega$.cm With increasing the main pressure the DC magnetron sputtered Cu film became more open structure. The heat treatment decreased the surface roughness of the sputtered Cr/Cu/Cr metal electrodes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1379-1382
• /
• 1997

Diamond-like carbon(DLC) thin films are produced by using a filtered cathodic vacuum arc(FCVA) deposition system. Different magnetic components, namely steering, focusing, and filtering plasma-optic systems, are used to achieve a stable arc plasma and to prevent the macroparticles from incorporating into the deposited films. Effects of magnetic fields on plasma behavior and film deposition are examined. The carbon ion energy is found to be varied by applying a negative (accelerating) substrate bias voltage. The deposition rate of DLC films is dependent upon magnetic field as well as substrate bias voltage and at a nominal deposition condition is about $2{\AA}/s$. The structural properties of DLC films, such as internal stress, relative fraction of tetrahedral($sp^3$) bonds, and surface roughness have also been characterized as a function of substrate bias voltages and partial gas($N_2$) pressures.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3703-3706
• /
• 2010

Biomolecules specific to explosives can be exploited as chemical sensors. Peptides specific to immobilized dinitrotoluene (DNT) were identified using a phage display library. A derivative of DNT that contained an extended amine group, 4-(2,4-dinitrophenyl)butan-1-amine, was synthesized and immobilized using a self-assembled monolayer surface on gold. Filamentous M13 phages displaying random sequences of 12-mer peptides specific to the immobilized DNT-derivate were isolated from the M13 phage library by biopanning. A common peptide sequence was identified from the isolated phages and the synthesized peptides showed selective binding to DNT. When the peptide was immobilized on a quartz crystal microbalance (QCM) chip, it showed a binding signal to DNT, while toluene barely showed significant binding to the QCM chip. These results demonstrate that peptides screened by biopanning against immobilized DNT can be useful for quick and accurate detection of DNT.

• Journal of Information Display
• /
• 제4권2호
• /
• pp.35-42
• /
• 2003

The field emission and luminescent properties of carbon nanotubes (CNTs) that were straightened by argon ion irradiation were investigated. Argon ion irradiation permanently straightened both as-grown and screen-printed CNTs (SP-CNTs) in the presence of a strong electric field. The straightening process enhanced the emission properties of as-grown CNT films by showing a decrease in turn-on field, an increase in total emission current, and a stable emission. Recurring problems associated with SP-CNTs, such as bent or/and buried CNTs and the degradation in binder-residue-induced emission, were improved by the permanent straightening of CNTs and protruding CNTs from binders by the irradiation treatment, in addition to its surface cleaning effect. Furthermore, we confirmed that the number of emission sites increases by observing the luminescent properties of CNT films after the straightening. These findings here suggest that ion irradiation treatment is an effective method for achieving uniform field emission and to reduce the electrical aging time.

• 정보저장시스템학회논문집
• /
• 제9권1호
• /
• pp.10-16
• /
• 2013

Through the rapid development of LED TV, a large-area edge-lit backlight unit is widely researched in the display industry for enhancing the optical efficiency, luminous uniformity and slim design. In addition, an edge-lit backlight unit includes many optical sheets such as reflection sheet, prism sheet and diffuser sheet. However the function can be replaced by the carefully patterned light guide plate (LGP). Micro patterns which located on the top and bottom surface of light guide plate was designed by ray-tracing optical simulation. The designed patterns improved the light characteristics of LGP, including optical extraction efficiency and intensity distribution uniformity. These results suggest that it is very effective method to design edge-lit LGP with micro-patterns on both sides for large-area display and to reduce the fabrication cost.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.340-343
• /
• 2000

ITO(Indium Tin Oxide) films for transparent electrodes of FPD(Flat Panel Display) were patterned in atmosphere using laser. A pulse type(repetition rate of 10 Hz) Q-switched Nd:YAG laser which can generate the fundamental wavelength at 1064 nm or its harmonics(532, 266 nm) was used for Patterning of the ITO film. In case of using the second harmonic(532 nm) of Nd:YAG laser, the ITO film(thickness of 20 nm) was removed clearly with a laser fluence of 5.2 J/$\textrm{cm}^2$ and a beam scan speed of 200${\mu}{\textrm}{m}$/s. But the glass substrate was damaged when the laser fluence was over 5.2 J/$\textrm{cm}^2$. We discussed the etching mechanism of the ITO film using Nd:YAG laser with observation of the etching characteristics including a depths and widths of ITO films as a function of laser fluence using SEM(Scanning Electron Microscopy) and surface profiler($\alpha$-step 500).

• 소성∙가공
• /
• 제21권1호
• /
• pp.36-41
• /
• 2012

Gas Assisted Injection Molding is a relatively new low-pressure injection molding technique that provides benefits such as reduced part warpage, excellent surface quality without shrink marks, greater design flexibility, etc. In the gas assisted injection molding process, the injected pressurized nitrogen gas flows through designed gas channels and forms hollow sections within the part. However, due to the characteristics of the gas, the design of the gas channels which are the paths for the injected gas is important in order to avoid defects such as gas blowout, fingering, etc. Therefore, in this study, the gas channel design for gas assisted injection molding of exterior display panels was conducted by examining the results of three CAE analyses. The designed gas channel was verified by conducting tryouts using a 450 ton injection molding machine with 3-stage pressure controlled gas kit. In addition, the hollow shapes which were formed by the gas with the installed gas channels were examined by examining the cross sections of the prototypes that were produced. As a result, it was found that exterior display panels can be produced without any defect by applying the gas assisted injection molding technique.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.381-385
• /
• 2012

In this paper, we present a novel integral imaging pickup method. We extract each pixel's actual depth data from a real object's surface using a depth camera, then generate elemental images based on the depth map. Since the proposed method generates elemental images without a lens array, it has simplified the pickup process and overcome some disadvantages caused by a conventional optical pickup process using a lens array. As a result, we can display a three-dimensional (3D) image in integral imaging. To show the usefulness of the proposed method, an experiment is presented. Though the pickup process has been simplified in the proposed method, the experimental results reveal that it can also display a full motion parallax image the same as the image reconstructed by the conventional method. In addition, if we improve calculation speed, it will be useful in a real-time integral imaging display system.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.6-13
• /
• 2022

The electrostatic phenomenon seriously issued in extreme ultraviolet semiconductor cleaning was studied in junction with molecular dynamic aspect. It was understood that two lone pairs of electrons in water molecule were subtly different each other in molecular orbital symmetry, existed as two states of large energy difference, and became basis for water clustering through hydron bonds. It was deduced that when hydrogen bond formed by lone pair of higher energy state was broken, two types of [H₂O]⁺ and [H₂O]^- ions would be instantaneously generated, or that lone pair of higher energy state experiencing reactions such as friction with Teflon surface could cause electrostatic generation. It was specifically observed that, in case of electrolyzed cathode water, negative electrostatic charges by electrons were overlapped with negative oxidation reduction potentials without mutual reaction. Therefore, it seemed that negative electrostatic development could be minimized in cathode water by mutual repulsion of electrons and [OH]^- ions, which would be providing excellences on extreme ultraviolet cleaning and electrostatic control as well.

• 한국광학회지
• /
• 제13권2호
• /
• pp.166-170
• /
• 2002

본 연구에서 우리는 반사형 LCD용 반사판을 최적화하고자 한다. 반사판의 새로운 표면구조를 체계적인 수식적 접근 및 분석을 통해 구한 후, 반사특성의 결과를 바탕으로 기존의 표면구조와 비교해서 보다 최적화된 표면구조를 제시하고자 한다. 반사특성의 결과로는 새로운 표면구조가 기존의 표면구조에 비해 동일한 시야각 범위에서 보다 균일한 반사율 분포를 나타내고 있으며, 또한 주변환경을 충분히 고려해서 사용자 위주의 자유로운 시야각 범위 조절이 가능함을 알 수 있다. 결과적으로, 새로운 표면구조는 보다 균일한 반사율 분포를 가지게 됨으로써, 기존의 반사형 LCD의 시야각 의존성을 상당부분 개선할 수 있으리라 본다.