• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.59-64
• /
• 2018

In recent years, the solar cell market has steadily grown with the demand for new energies. And wire sawing is one of the most critical processes in manufacturing solar cell wafer which is supposed to affect the breakage of wafers most during the process and afterwards. Generally, the defects of the wafers are generated from the structural vibrations of the machine. In the sawing process, the vibrations cause unnecessary normal stress on the cut surface of wafers, and eventually create the surface damage or leave the residual stress. In this study, the dynamic properties of a wire saw have been analyzed through the frequency response test and the computer simulation. And the effects of the design alterations have been investigated to stabilize the machine structure and further to reduce the vibrations. The result shows that relatively simple design alterations of supporting structure without any change of major parts of the machine can suppress the vibrations of the machine effectively.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.28-33
• /
• 2020

Plasma etching process employs high density plasma to create surface chemistry and physical reactions, by which to remove material. Plasma chamber includes silicon-based materials such as a focus ring and gas distribution plate. Focus ring needs to be replaced after a short period. For this reason, there is a need to find materials resistant to erosion by plasma. The developed chemical vapor deposition processing to produce silicon carbide parts with high purity has also supported its widespread use in the plasma etch process. Silicon carbide maintains mechanical strength at high temperature, it have been use to chamber parts for plasma. Recently, besides the structural aspects of silicon carbide, its electrical conductivity and possibly its enhanced life time under high density plasma with less generation of contamination particles are drawing attention for use in applications such as upper electrode or focus rings, which have been made of silicon for a long time. However, especially for high purity silicon carbide focus ring, which has usually been made by the chemical vapor deposition method, there has been no study about quality improvement. The goal of this study is to reduce surface roughness and depth of damage by diamond tool grit size and tool dressing of diamond tools for precise dimensional assurance of focus rings.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.125-129
• /
• 2021

We investigated the electronic property and atomic structure for chalcopyrite (CH) Al_xGa_1-xAs semiconductor by using first-principles FPLMTO method. The CH-Al_xGa_1-xAs exhibits a p-type semiconductor with a direct band-gap. For low Al concentration unoccupied hole-carriers are induced, but for high Al concentration it is formed a localized bonding or anti-bonding state below Fermi level. The hybridization of Al(3s)-Ga(4s, or 4p) is larger than that of Al(3s)-As(4s, or 4p). And the Al film on As-terminated surface, Al/AsGa(001), is more energetically favorable one than that on Ga-terminated (001) surface. Consequently, the band-gap of CH-Al_xGa_1-xAs system increases exponentially with increasing Al concentration. The change of lattice parameter is shown two different configurations with increasing Al concentration. The calculated lattice parameters for CH-Al_xGa_1-xAs system are compared to the experimental ones of zinc-blend GaAs and AlAs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1292-1294
• /
• 2007

In this report, the effects of chemical surface treatments of ITO gate electrodes of OTFTs have been studied by using acid and base solutions. As a result, it is observed that the threshold voltage of OTFTs could be influenced and modified by the surface treatments. The device with an ITO gate electrode surface-treated by a base solution shows the lowest threshold voltage of -7.66 V, while the threshold voltages are about -13.51 V and -15.3 V for the devices without a surface treatment and with the acid solution treatment, respectively. It is thought that the work function of ITO electrode surface might be affected by the surface treatments, thereby influencing the threshold voltage.

• Current Photovoltaic Research
• /
• 제2권1호
• /
• pp.14-17
• /
• 2014

In this paper, indium reduced materials for transparent conductive electrodes (TCE) were fabricated and their physical properties were evaluated. Two of materials, indium-zinc-tin oxide (IZTO) and aluminum (Al) were selected as TCE materials. In case of IZTO nanoparticles, composition ratios of In, Zn and Sn is 8:1:1 were synthesized. Size of the synthesized IZTO nanoparticles were less than 10 nm, and specific surface areas were about $90m^2/g$ indicating particle sizes are very fine. Also, the IZTO nanoparticles were well crystallized with (222) preferred orientation despite it was synthesized at the lowered temperature of $300^{\circ}C$. Composition ratios of In, Zn and Sn were very uniform in accordance with those as designed. Meanwhile, Al was deposited onto glass by sputtering in a vacuum chamber for mesh architecture. The Al was well deposited onto the glass, and no pore was observed from the Al surface. The sheet resistance of Al on glass was about $0.3{\Omega}/{\square}$ with small deviation of $0.025{\Omega}/{\square}$, and adhesion was good on the glass substrate since no pelt-off part of Al was observed by tape test. If the Al mesh is combined with ink coated layer which is consistent of IZTO nanoparticles, it is expected that the good and reliable metal mesh architecture for TCE will be formed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.575-578
• /
• 2004

The charging tendency of $Zn_2SiO_4:Mn^{2+}$ phosphor surface was modified in order to improve discharging characteristic of green cell in an ac-plasma display panel (ac-PDP). The Zinc-silicate ($Zn_2SiO_4:Mn^{2+}$) green-emitting phosphor was coated with magnesium oxide(MgO), which is viable to have positive charge on the surface. After fabricating the green cell with MgO-coated $Zn_2SiO_4:Mn^{2+}$, the electrical and optical properties in the cell were examined. It was found that the dynamic voltage margin could be increased while the address time was reduced. It may be ascribed to the change of charging tendency of $Zn_2SiO_4:Mn^{2+}$ phosphor by MgO coating, which makes it possible to stable wall-charge accumulation. When $Zn_2SiO_4:Mn^{2+}$ phosphor was coated with 1.3wt%-MgO, the address time was reduced 1.2 ${\mu}s$ and the address voltage lowered 25 V without any misfiring problem, compared to those of typical $Zn_2SiO_4:Mn^{2+}$ phosphor layer. The luminescence intensity of green cell using MgO-coated phosphor layer was also improved by 10%.

• 한국식품조리과학회지
• /
• 제30권1호
• /
• pp.84-91
• /
• 2014

The purpose of this study was to identify the effects of emotional labor on emotional exhaustion among school dietitians according to the level of their self-efficacy. A survey was administered on 300 school dietitians during September 2012 and a total of 277 usable questionnaires were received. The data were analyzed by using the SPSS 18.0 package program. As a result of principal factor analysis for validity test, 26 variables were classified into one factor for self-efficacy, three factors for emotional labor and one factor for emotional exhaustion with a total variance percentage of 67.371%. Internal consistency was estimated by Cronbach's alpha, which yielded reliability coefficients of 0.922 (self-efficacy), 0.916 (emotional display), 0.806 (surface acting), 0.808 (deep acting) and 0.850 (emotional exhaustion). Subjects were segmented into 2 groups of 'high self-efficacy' (n = 159) and 'low self-efficacy' (n = 118) according to the cluster analysis for self-efficacy variables. The 'high self-efficacy' group exhibited higher education(p < 0.01) and served less lunch meals than other groups (p < 0.05). According to multiple regression analysis, the emotional display proved to be significantly and positively related to emotional exhaustion (${\beta}$=0.319, p<0.001) in high self-efficacy group. However both emotional display (${\beta}$=0.233, p<0.05) and surface acting (${\beta}$=0.262, p<0.01) were positively related to emotional exhaustion in the low self-efficacy group. These results suggest that school dietitians should be more aware of their self-efficacy to relieve the effects of the emotional labor on emotional exhaustion.

• 한국실내디자인학회논문집
• /
• 제15호
• /
• pp.3-16
• /
• 1998

Fashion specialty store is based on one theme called "Fashion", to pursue originality of facilities in one concept from merchandising, environmental planning and facilities management and satisfy consumer's urge quantitatively as well as qualitative]y also congreqation of characteristic space, distingtion from commor store, not only selling goods but also jointly owned funtiona] space such as information and culture. So this research. with the importance of image. to present the basic information of interior design, study on the analyzing the type of image and the factor of composition focused on the complex fashion specialty store in own brand. Ana]yzing thr type of image with preliminary research and the first and second questionnair, with this make a comparision between the factor of composition and image. The conclusion was summertized as follows : '||'&'||'#8226; Firstly, the interior image of complex fashion specialty store in own brand divided into ;) different images, Such as :VIodern, Semi Classic. Hi-Tech Ylodern, Natural. and casual image '||'&'||'#8226; Secondly, according to the factor of composition is as follows, Such as Architecture, Surface. Furniture, Lighting and Display, the factor of composition is as follows : Architectura] factor divided into vertical. horizental. flexibility and exterior, Surface : material. and main color, Furniture : form and material. Lighting : lighting fixture and genera] lighting system, and Display: window and interior display . '||'&'||'#8226; Third]y, make a comparision of image. simple and feminine with Hi-Tech, Semi-Classic toward natural. complicated, feminine. and Low-Tech, Hi Tech ~.Iodern image, toward modem. natural. simple feel and somehow feminine. Natrual image, toward modem. natura], simple, and Hi Tech, Casual image toward modm, simple, and Hi Tech. '||'&'||'#8226; Fourthly, with builaing up new space, alteration infashion specialty store focused on the customers seiling space with rest and resources, also huge character is found in fashion specialty store

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권1호
• /
• pp.98-105
• /
• 2000

The projectors using liquid crystal display(LCD) have faults such as low optical efficiency, low brightness and even heat generation. To solve these problems reflective-type spatial light modulators based on MEMS (Microelectromechanical Systems) technology have emerged. Digital Micromirror DeviceTM(DMDTM), which was already developed by Texas Instruments Inc., and Thin-film Micromirror ArrayTM(TMATM), which has been recently developed by Daewoo Electronics Co., are the representative examples. The display using TMATM has particularly much higher optical efficiency than other projectors. But the micromirrors manufactured by semiconductor processes have inevitable distortion because of the limitations of the manufacturing processes, so that the distortions of their surfaces have great influence on the optical efficiency of the projector. This study investigated the effects of mirror flatness on the optical performance, including the optical efficiency, of the TMATM projector. That is to say, as a part of the efforts to enhance the performance of the TMATM projector, how much influence the form errors of a micromirror surface exert on the optical efficiency and the modulation of gray scale of the projector were analyzed through a pertinent modeling and simulations.

• 폴리머
• /
• 제29권4호
• /
• pp.413-417
• /
• 2005

LCD 배향막으로 응용하기 위하여 광반응성 polyvinylcinnamate 필름 위에서 액정 분자들의 배향에 관한 연구를 수행하였다. 선편광 UV를 polyvinylcinnamate 필름에 노광하면 선택적인 광반응에 의하여 필름 내에 이방성이 형성되고, 필름 표면에 인접한 액정 분자는 고분자와 분자간 상호작용으로 고분자 배향 방향과 동일한 방향으로 늘어선다. 광배향막을 사용한 액정 셀의 열 및 빛에 대한 안정성은 배향막에 UV를 다시 노광하고 열을 가한 후 유도된 액정 배향 변화를 측정하여 조사하였다. 선편광 UV를 여러번 노광한 필름의 경우 처음 노광 방향에 관계없이 최종으로 노광한 편광 UV의 방향에 따라 액정 배향이 유도되었다.