• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1065-1068
• /
• 2009

The current study introduces a new color space applicable to next-generation media such as UHDTV and 3D-TV systems that are in the middle of development. Display referred approach was taken into account rather than scene referred approach for deriving a new RGB-primary set forming the new color space. The reproducible color range generated by the newly suggested RGB-primary set encompasses almost entire real-world surface colors with a very good efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1593-1595
• /
• 2009

We demonstrate an intriguing liquid crystal display (LCD) mode that comprises an optically isotropic liquid crystal (LC) composite incorporating with inplane electric field geometry. No surface treatment, such as rubbing, is required to fabricate the LCD mode because it is based on an optically isotropic state. The measured response time was of submillisecond order. The LCD mode has several unique features such as fast response, continuous grayscale capability, and a high contrast ratio.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.299-302
• /
• 2007

We propose a soft-lithographic patterning method for producing a multi-domain liquid crystal (LC) alignment. The LC alignment polyimide layers are periodically patterned in the pixel boundaries by a micromolding-in-capillaries method. In our structure, the initially homeotropic LC orientations in the pixel areas are changed to axially symmetric LC domains due to the symmetric pretilt of LC molecules on the pixel boundaries.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.904-907
• /
• 2007

We reported a simplified circuit model to investigate the interface states and the quality of a-Si film based on a MIS structure using admittance spectroscopy. The model can be employed easily to monitor the fabrication process of thin-film transistor and to obtain the important parameters.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.109-112
• /
• 2007

A new concept of the microlens array is fabricated using a birefringent layer on the concave microlens array. The stacked layers of liquid crystalline polymer (LCP) and the UV epoxy focus an incident light due to the surface relief structure. The ferroelectric liquid crystal layer was added to control the focusing intensity with a fast switching time.

• Journal of Information Display
• /
• v.2 no.4
• /
• pp.57-62
• /
• 2001

Green-emitting $Zn_2SiO_4$:Mn phosphor particles having a spherical shape and high luminescence intensities under VUV were prepared by spray pyrolysis process under severe preparation conditions. The type of precursor solutions affected the morphology and luminescence characteristics of the prepared particles. The particles prepared from the clear solution by laboratory-scale process had spherical shape and dense morphology, while the particles prepared from the severe preparation conditions had rough surface and collapsed structure. However, the particles prepared from the colloidal solution utilizing fumed silica were spherical in shape and filled morphology at the severe preparation conditions of high flow rate of carrier gas, high concentration of solution, and large reactor size. The prepared $Zn_2SiO_4$:Mn phosphor particles with complete spherical shape had higher photoluminescence intensity than that of the commercial product prepared by solid state reaction.

• Journal of Information Display
• /
• v.2 no.4
• /
• pp.63-67
• /
• 2001

The switching power loss due to the panel capacitance during sustain period in AC PDP driving system can be minimized by using the energy recovery circuits. We proposed a new energy recovery circuit, SER1 (Seoul national univ. Energy Recovery circuit 1st). The experimental results of its application to a 42-inch surface discharge type AC PDP showed superior performance of SER1 in energy recovery efficiency and low distortion voltage waveform. Energy recovery efficiency of SER1 was measured up to 92.3 %, and the power dissipation during the sustain period was reduced by 15.2 W in 2000 pulse/frame compared with serial LC resonance energy recovery circuit.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.2
• /
• pp.35-38
• /
• 2008

This study shows the improvement of PR-Ashing rates in semi-conductor process using Atmospheric Plasma. Taguchi method is used to improve Ashing rates of photo-resist that is spread on the surface of a wafer. Improvement of Ashing rates is acquired through the decision of the effective factors and suitable combination of the factors. The results show the contribution rate of each factor and the effectiveness of Plasma for PR-Ashing process in this system.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.147-150
• /
• 2005

We process a novel approach cal led combined nanoimprint and photolithography (CNP) to greatly simplify the fabrication in conventional nanoimprint lithography (NIL). In this study, a novel HMM with anti-sticking $SiO_2$ layer is introduced to improve the quality of transferred pattern. The surface property was investigated using contact angle measurement and spectrophotometer. Replicate pattern with CNP using HMM showed complete pattern transfer without defect.

• Current Optics and Photonics
• /
• v.5 no.6
• /
• pp.660-671
• /
• 2021

We present a novel optical system for an augmented reality head-up display (AR HUD) with two virtual images at different conjugates by employing a confocal off-axis two-mirror and introducing the horopter circle. For a far virtual image with large asymmetrical aberrations, we initially obtain an off-axis two-mirror system corrected for these aberrations and compensated for the down angle by configuring its parameters to satisfy the confocal and Scheimpflug conditions, respectively. In addition, this system is designed to reduce the biocular parallax by matching Petzval surface into the longitudinal horopter circle in a near virtual image. This design approach enables us to easily balance the residual aberrations and biocular parallax when configuring the optical system with two different conjugates, which results in an AR HUD available for near and far virtual images together.