• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1333-1335
• /
• 2007

We studied the surface defects and the current distributions of ITO thin films by reflected electron energy loss spectroscopy (REELS) and conductiveatomic force microscope (c-AFM). The ohmic behavior of ITO thin film was observed at $230\;^{\circ}C$ annealed sample. The defects related to the electronic structure decreased after anneal process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.60-63
• /
• 2000

In this study, efficient force reflection algorithm is developed for the Haptic Display by using a proxy concept and friction model. When there are not any contacted obstacles the proxy is following human operator's command trajectory in the 3D virtual space. But when the operator's command trajectory is locating inside of the object, the proxy is constrained by the surface of the object. Here only with the information of the proxy position and operator's command trajectory at every time step, we can calculate the reflection force and its orientation. To display the friction force between two virtual stiff material which are sliding against each other, modified Karnopp's friction model is used. In the friction model, a damping term and a Stribeck effect term are included to display the relative velocity effect and stick-slip effect at the very low relative velocity region respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.43-46
• /
• 2008

This study investigated if a requirement for screen gloss is needed in the TCO Requirements and was, therefore, targeted towards finding an acceptable reflex level. The results show that a glossy surface has an impact on the visual ergonomics, and for this reason we believe that a requirement is needed. Although, the results do not point to a single value that is better than another, so a selection for a requirement level has to be augmented with additional information. Such a discussion is given and 60 gloss units at 60 degrees ($GU_{60}$) was selected as the new requirement level for the TCO Requirements (TCO '03 and TCO '05).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.657-659
• /
• 2008

Barrier coating properties of PVA/$SiO_2$ on the flexible substrates (PEN) have been investigated. Thin layer of PVA/$SiO_2$ organic-inorganic hybrid materials were deposited on PEN substrate by the spin-coating. The optical properties and surface roughness of barrier layer on flexible substrate were characterized by AFM, UV-Vis and WVTR/ OTR.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1225-1228
• /
• 2005

Barrier ribs in the plasma display panel(PDP) function to maintain the discharge space between the glass plates as well as to prevent optical crosstalk. Patterning of barrier ribs is one of unique processes for making PDP. In this work photosensitive barrier rib pastes were prepared by incorporating binder polymer, solvent, functional monomers photoinitiator, and barrier rib powder of which surface was treated with fumed silica particles. Study on the function of materials for the barrier rib paste were undertaken. After optimization of paste formulation and photolithographic process, it was found that photolithographic patterning of barrier ribs with photosensitive barrier rib green sheet could be used in the fabrication of high resolution PDP.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1390-1393
• /
• 2005

We fabricated an efficient top emission organic light emitting diode (FTEOLED) on paper substrates. For water proof and surface planarization, parylene of 5mm thick has been coated on copy paper substrate by vapor polymerization. As use this coating layer, fabrication of device was possible by photolithography and wet etching. Because paper is not transparent, we adapted top emission structure with transparent cathode and reflective anode. The FTOLED on paper showed the excellent electrical characteristic, $109cd/m^2$, 2.3cd/A at 10V.

• Journal of the Korean Vacuum Society
• /
• v.19 no.1
• /
• pp.28-35
• /
• 2010

A new electrode structure in a plasma display panel was designed in a way to increase the bright room contrast ratio (BRCR). The area of the black matrix pattern to get a low reflection from the panel surface was enlarged using the new electrode design concept. The electrical characteristics such as firing voltage, voltage margin and power consumption were measured. The luminance of the panel was measured and the luminous efficiency was calculated. It was found that the new electrode structure was very effective to enhance the BRCR.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.651-654
• /
• 2002

We carried out 2-dimensional numerical calculations of electrostatic potential for triode field emitters with planar cathodes using the finite element method. As it turned out, the conventional triode structure with a planar cathode suffered from large gate current and wide spreading of emitted electrons. To circumvent these shortcomings, we proposed a new triode structure. By simply inserting a conducting layer of proper thickness on top of the cathode layer, we were able to modify the electric field distribution on the cathode surface so that low gate current and electron-focusing effect were achieved, simultaneously.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.3 s.16
• /
• pp.33-36
• /
• 2006

To produce a fine structure with uniform surface of barrier ribs in PDP, acid etching process has been used in manufacture process. It is necessary to understand the mechanism of etching, particularly on the interface of ceramic fillers and matrix glass. We investigated the effect of ceramic fillers (ZnO, $Al_2O_3$) on the microstructure of borate glass system to find an etching mechanism of barrier ribs. The barrier ribs was etched with several steps, dissolving a small amount of residual glass, taking out alumina fillers, and removing a cluster type of ZnO fillers and glass matrix.

• YAKHAK HOEJI
• /
• v.47 no.3
• /
• pp.176-179
• /
• 2003

A library of unlimited number of novel lectins with diverse specificities has been previously generated by randomly mutating the carbohydrate-recognition domain of Maackia amurensis hemagglutinin (MAH). To establish the experimental environment capable of selecting high affinity mutant lectins in E. coli, phage display system was adapted. Carbohydrate binding capacity of two phagemid vectors, pComb3 and pComb8 displaying wild-type MAH lectin was assessed. Specific bindings of pComb3 and pComb8 phages expressing w.t. MAH to affinity-purified polyclonal anti-MAH antibody and to glycophorin was demonstrated. Both phages also showed strong hemagglutinating activity to intact but not sialidase-treated human erythrocytes, which is consistent to the specificity of native MAH. Taken together, two different phage display vectors successfully allowed the expression of active MAH as a fusion protein on the surface of bacteriophage, which will lead to preparation of unique plant lectins with high affinity toward a variety of carbohydrate chains.