• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.96-99
• /
• 1992

The microanalysics by the direct observation of 180 (P, a)'" nuclear reactions on tungsten (110) surfaceare investigated using a 2MeV Van de Graaff accelerator. This method allows the determination of very smallquantities of nuclei near the surface of samples. The yields increase with oxygen exposure. The oxygen coverage, 0, is 0.5 at 5 Langmuir and 1.0 at 15 Langmuir.5 Langmuir.

• The Journal of the Korean dental association
• /
• v.55 no.3
• /
• pp.230-239
• /
• 2017

Root coverage can be an efficacious treatment not only in aspect of dental symptoms like root caries and hypersensitivity, but also in aspect of esthetic problem. There are several predictable methods for gaining a connective tissue attachment to an exposed root surface. Among them, this case report will deal with three cases using enamel matrix derivative and connective tissue graft to recover esthetic and physiological periodontal environment and its form. This case report deals with three patients with gingival recession which has occurred by different causes. They were treated with de-epithelialized graft accompanied by application of enamel matrix derivative. 6-12 months later, all three patients showed considerable root coverage and clinically stable condition of healing. In conclusion, within the limitation of this study, de-epithelialized connective tissue graft accompanied by application of enamel matrix derivative shows stable and clinical acceptable results in aspect of root coverage.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.302-309
• /
• 2016

Urea-SCR system is currently regarded as promising NOx reduction technology for diesel engines. SCR system has to achieve maximal NOx conversion in combination with minimal $NH_3$ slip. In this study, model based open loop control for urea injection was developed and assessed in the European Transient Cycle (ETC) for heavy duty diesel engine. On the basis of the transient modeling, the kinetic parameters of the $NH_3$ adsorption and desorption are calibrated with the experimental results performed over the zeolite based catalyst. $NH_3$ storage or surface coverage of SCR catalyst can not be measured directly and has to be calculated, which is taken into account as a control parameter in this model. In order to reduce $NH_3$ slip while maintaining NOx reduction, $NH_3$ storage control algorithm was applied to correct the basic urea quantity. If the actual $NH_3$ surface coverage is higher than the maximal $NH_3$ surface coverage, the urea injection quantity is significantly reduced in the ETC cycle. By applying this logic, the resulting $NH_3$ slip peak can be avoided effectively. With optimizing the kinetic parameters based on standard SCR reaction, it suggests that a simplified, less accurate model can be effective to evaluate the capability of model based control in the ETC cycle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.63-63
• /
• 2010

Using both experimental and theoretical approaches, we have investigated the adsorption properties of an organic molecule (HATCN), which is used in OLEDs as an efficient hole injection layer, on metal and inert surfaces. We have also studied the structural and electronic properties of such interfaces and the dependences on deposition thickness. We have observed different trends in work function changes with different surfaces. Our photoelectron spectroscopic measurements have revealed an abnormal phenomenon in HATCN on a metal (Cu) surface: the work function decreases at lower coverage (~monolayer) of HATCN on a metal (Cu) surface, but it increases back and becomes higher than that of a bare Cu surface at higher coverage. It has, on the contrary, been observed that the work function of graphene surface just increases as the HATCN coverage increases. Our first-principles density functional calculations has not only verified our experimental observations, but also disclosed the underlying mechanism of such abnormal and different work function behaviors. We have found that the change in work function results from mutual polarization induced by the geometrical deformation and the bond dipole formed at the interface due to the charge redistribution. At low coverage of HAT-CN on Cu substrate, the former reduces the work function significantly by pulling down the vacuum level, while the latter tends to push up the vacuum level resulting in the work function increase.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4329-4337
• /
• 2022

Jet impinging device is designed for decay heat removal on horizontal fuel rods in a low temperature heating reactor. An experimental system with a fuel rod simulator is established and experiments are performed to evaluate water film covering capacity, within 0.0287-0.0444 kg/ms mass flow rate, 0-164.1 kW/m² heating flux and 13.8-91.4℃ feeding water temperature. An effective method to obtain the film coverage rate by infrared equipment is proposed. Water film flowing patterns are recoded and the film coverage rates at different circumference angles are measured. It is found the film coverage rate decreases with heating flux during single-phase convection, while increases after onset of nucleate boiling. Besides, film coverage rate is found affected by Marangoni effect and film accelerating effect, and surface wetting is significantly facilitated by bubble behavior. Based on the observed phenomenon and physical mechanism, dry-out depth and initial dry-out rate are proposed to evaluate film covering potential on a heating surface. A model to predict film coverage rate is proposed based on the data. The findings would have reliable guide and important implications for further evaluation and design of decay heat removal system of new reactors, and could be helpful for passive containment cooling research.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.3
• /
• pp.201-205
• /
• 2003

The effects of adsorption and desorption of alkali-metals on Si(111) surface were investigated by using AES and RHEED-system. The adsorption system is a fundamental interest because of its unique electronic properties such as measurement of work function change, adatom-core level shift. It was found that the growth node of K on Si(111) surface was layer by layer growth and the saturation coverage was 2.0ML at room temperature. Superstructure changes on Si(111) surface according to the alkali-metal thickness and substrate temperatures were accurately defined. By applying the isothermal desorption method, the desorption energies of Li/Si(111) and K/Si(111) surfaces was measured. On Li/Si(111) and K/Si(111) surfaces, the desorption energies were 3.07 eV, 2.19 eV respectively.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.3
• /
• pp.209-212
• /
• 2002

The change of surface structures for the deposition of Sn, In on clean Si(111) surface is investigated as a function of surface coverage by RHEED system. For tin submonolayer films $7{\times}7$, ${\sqrt{3}}{\times}{\sqrt{3}}$ structures are observed depending on the coverage and substrate temperature. For indium submonolayer films $7{\times}7$, ${\sqrt{3}}{\times}{\sqrt{3}}$, ${\sqrt{31}}{\times}{\sqrt{31}}$, $1{\times}1$ structures are observed. We find that at substrate temperature of $500^{\circ}C$, ${\sqrt{3}}{\times}{\sqrt{3}}$ structure is formed at tin coverages of 0.2~0.4 ML and at indium coverages of 0.1~0.3 ML, respectively. From the desorption process, the desorption energies of Sn, In in ${\sqrt{3}}{\times}{\sqrt{3}}$ structure is observed to he 3.25 eV, 2.66eV, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.60-60
• /
• 2014

By the pre-doping technique on graphene/copper foil, we obtained the pristine sheet resistance and optical transmittance of the chlorine doped-single layer graphene $245{\Omega}/sq$ and 97% at 550 nm wavelength, respectively. X-ray photoelectron spectroscopy revealed that an extremely high Cl coverage of 47.3% of monolayer graphene surface was achieved as the highest surface-coverage graphene doping material ever reported.

• Journal of Applied Reliability
• /
• v.17 no.4
• /
• pp.325-331
• /
• 2017

Purpose: There is active research that improves both reliability and fatigue life of structures which widely used in the aerospace fields of defense industry. The effects of three parameters (pressure, peening time, nozzle distance) on Almen intensity and coverage will be investigated by using the experimental and analyzed data. Methods: we employed a Box-Behnken design. Additionally, to verify the validity of the optimal condition obtained from experimental results, metallurgical analyses of the shot-peened aerospace part were conducted with respect to surface morphology, residual stress. Results: Optimal shot peening condition is determined as (distance, pressure, time) by optimizing simultaneously the two responses of intensity and coverage. At the optimal peening condition the prediction interval for Almen intensity is well within the required range. And, the validity of the condition was checked by using the real aerospace aluminum alloy plate. Conclusion: Shot peening introduces significant levels of compressive residual stress and induces improves both reliability and fatigue life of structures.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1099-1101
• /
• 2003

Change detection technology, which discovers the change information on the surface of the earth by comparing and analyzing multi-temporal satellite images, can be usefully applied to the various fields, such as environmental inspection, urban planning, forest policy, updating of geographical information and the military usage. In this paper, we introduce a change detection system that can extract and analyze change elements from high-resolution satellite imagery as well as low- or middle-resolution satellite imagery. The developed system provides not only 7 pixelbased methods that can be used to detect change from low- or middle-resolution satellite images but also a float window concept that can be used in manual change detection from highresolution satellite images. This system enables fast access to the very large image, because it is constituted by OGC grid coverage components. Also new change detection algorithms can be easily added into this system if once they are made into grid coverage components.