• 제목/요약/키워드: surface contamination

검색결과 935건 처리시간 0.025초

A Highly Sensitive Determination of Bulk Cu and Ni in Heavily Boron-doped Silicon Wafers

  • Lee, Sung-Wook;Lee, Sang-Hak;Kim, Young-Hoon;Kim, Ja-Young;Hwang, Don-Ha;Lee, Bo-Young
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권7호
    • /
    • pp.2227-2232
    • /
    • 2011
  • The new metrology, Advanced Poly-silicon Ultra-Trace Profiling (APUTP), was developed for measuring bulk Cu and Ni in heavily boron-doped silicon wafers. A Ni recovery yield of 98.8% and a Cu recovery yield of 96.0% were achieved by optimizing the vapor phase etching and the wafer surface scanning conditions, following capture of Cu and Ni by the poly-silicon layer. A lower limit of detection (LOD) than previous techniques could be achieved using the mixture vapor etching method. This method can be used to indicate the amount of Cu and Ni resulting from bulk contamination in heavily boron-doped silicon wafers during wafer manufacturing. It was found that a higher degree of bulk Ni contamination arose during alkaline etching of heavily boron-doped silicon wafers compared with lightly boron-doped silicon wafers. In addition, it was proven that bulk Cu contamination was easily introduced in the heavily boron-doped silicon wafer by polishing the wafer with a slurry containing Cu in the presence of amine additives.

Assessment of drinking water quality and its health impact on local community in coastal belt Karachi

  • Samo, Saleem Raza;Channa, Raja Siraj Ahmed;Mukwana, Kishan Chand
    • Advances in environmental research
    • /
    • 제6권3호
    • /
    • pp.203-216
    • /
    • 2017
  • For survival of human beings clean water is an essential commodity whereas contamination in drinking water threatens to mankind. The main cause of water contamination is social and development activities of human being along with increasing population. The community in the study area has acute shortage of drinking water along with about 40 to 60% has no access to safe drinking water. This study indicates drinking water quality of two major sources of coastal belt of Karachi one is supplied by Karachi Water & Sewerage Board (KWSB) as tap water and the other through groundwater. The physicochemical analysis was carried out by following the standard methods for checking the quality of drinking water. The analyzed results showed that the quality of groundwater was unfit as potable water. The most critical situation was observed as high level of contamination followed by high turbidity and increased salinity levels. TDS in surface water were found 12% above and TDS in groundwater was 20% below the National Drinking Water Quality Standards (NDWQS) of Pakistan as well as the permissible WHO drinking water quality guidelines.

식육의 처리 단계별 미생물 오염실태와 병원성 미생물의 분포 (Hygienic Quality of Beef and Distribution of Pathogens during Cut-Meat Processing)

  • 오영숙;이신호
    • 한국식품위생안전성학회지
    • /
    • 제16권2호
    • /
    • pp.96-102
    • /
    • 2001
  • 위생적인 신선육 처리 방안을 모색하기 위하여 도체처리 과정과 식육처리 과정 중 고기의 표면 및 작업도구의 위생실태를 계절별로 검토하였다. 하절기에 총균수, 저온성 균수, 대장균군수 모두 높게 나타났으며, 특히 도체 세척전보다 세척 후에 미생물 오염도가 높았고, 계절에 관계없이 수송 후의 오염도가 가장 높았다. 칼, 도마와 장갑에서 하절기에 $10^{5}$ $ extrm{cm}^2$을 나타내어 높은 미생물 오염도를 나타내었다. 도체 처리 과정 중 도체 표면에서 Escherichia. coli O157, Pseudomonas aeruginosa, Klebsiella, ornithinolytica, Staphylococcus aureus, E. Tatumella, ptyseos, Serratia odorifera, Aeromonas, Aeromonas sobria, Enterobacter colacae, Flavimonas oryzihabitans oryzihabitans를 분리하였으며, 도마에서는 S. aureus, Listeria grayi, L. monocytogenes, 장갑에서 L. grayi, Erwinia spp., Salmonella spp. S aureus, 골발육에서는 Citrobacter freundii, L. momocytogenes, S. aureus가 분리.동정하였다.

  • PDF

퇴적물 오염기준을 이용한 금강 하구역 표층 퇴적물내 유기물 및 미량금속 오염 평가 (Evaluation of Organic Matter and Trace Metal Contamination in Surface Sediments around the Geum River Estuary using Sediment Quality Guidelines)

  • 황동운;이인석;최민규;김숙양;최희구
    • 한국수산과학회지
    • /
    • 제46권6호
    • /
    • pp.930-940
    • /
    • 2013
  • We evaluated contamination with organic matter and trace metals by analyzing grain size, ignition loss (IL), chemical oxygen demand (COD), acid volatile sulfide (AVS), and trace metals (Al, Fe, Cu, Pb, Zn, Cd, Ni, Cr, Mn, Hg, and As) in surface sediments at 28 stations around the Geum River estuary in July 2008. The surface sediments in the estuary were mainly composed of coarse sediment (sand and muddy sand), with mean grain size (Mz) ranging between $2-4{\O}$. The high concentrations of IL, COD, and trace metals were mainly found at stations in front of the Gusan outer port and industrial complex, and near the Seocheon coast with relatively fine sediments. In addition, the concentrations of IL and all trace metals, except Pb and As, showed good positive correlations with Mz, indicating that the concentrations of organic matter and trace metals were mainly dependent on sediment grain size. The concentrations of COD, AVS, and trace metals in most sediments did not exceed the sediment quality guideline (SQGs). Although the sediments in the study region are not polluted with organic matter and trace metals, there are many point sources of pollutants, such as Gusan port and industrial complex, Janghang refinery, and a thermoelectric power plant around the Geum River estuary. Thus, the management of coastal environments through periodic monitoring of organic matter and trace metals is required in the future.

Determination of Cadmium and Zinc Contamination Source in Arable Soil in the Vicinity of a Zinc Smelting Factory

  • Hong, Chang-Oh;Gutierrez, Jessie;Lee, Seul-Bi;Lee, Yong-Bok;Yu, Chan;Kim, Pil-Joo
    • 한국환경농학회지
    • /
    • 제26권3호
    • /
    • pp.204-209
    • /
    • 2007
  • Agricultural area in the vicinity of the ${\triangle}{\triangle}$ smelting factory in Kyeongbuk province, the third largest zinc smelting factory in the world, was contaminated by high concentration of heavy metals. However, the heavy metals source was not yet directly traced and thus, resulted to a conflict between the factory and residents within its vicinity. In order to determine the level of heavy metal contamination in the arable lands located at the north eastern part of the factory, soils were sampled systematically. To find out the major reason for the occurrence of this problem, waters and aerosols were sampled with constant intervals to the upward and downward direction from the factory and were analyzed to find out the heavy metal concentrations. Cadmium (Cd) and zinc (Zn) of the heavy metals were highly accumulated more than the Korean warning criteria (Cd 1.5, Zn 300 mg $kg^{-1}$) with mean values 1.7 and 407 mg $kg^{-1}$, respectively, at the surface soils (0-20 cm), and heavy metal concentration significantly decreased with increasing soil depth In addition, the concentration of both metals slightly decreased with increasing distance from the factory to the surface soils. Cadmium and Zn were detected in the upward stream water with low concentration and concentrations increased significantly in the downstream after passing across the factory. Aerosol samples also showed traces of Cd and Zn which could be attributed to the contamination of the water system and the surface soils. Conclusively, Cd and Zn emitted from the ${\triangle}{\triangle}$ smelting factory moved with the aerosol in the atmosphere and thus, contaminated the agricultural areas and the water system within it vicinity.

지화학적 평가기법을 이용한 전남 서해 도서갯벌 퇴적물내 중금속 오염도 평가 (Evaluation of Heavy Metal Contamination in Intertidal Surface Sediments of Coastal Islands in the Western Part of Jeollanam Province Using Geochemical Assessment Techniques)

  • 황동운;김성길
    • 한국수산과학회지
    • /
    • 제44권6호
    • /
    • pp.772-784
    • /
    • 2011
  • We measured grain size, organic matter, and metallic elements (Fe, Cu, Pb, Zn, Cd, Cr, Mn, Hg, and As) in intertidal sediments collected from six islands in the western part of Jellanam Province in order to evaluate heavy metal contamination in the tidal flat sediments of coastal islands. The evaluation of metal contamination was carried out using geochemical assessment techniques such as sediment quality guidelines (SQGs), enrichment factor (EF), and geoaccumulation index ($I_{geo}$). Surface sediments were classified into four sedimentary facies: sand, gravelly muddy sand, slightly gravelly mud, and silt. The concentrations of heavy metals in intertidal sediments from Jaeun, Amtae, Biguem, and Docho islands showed good positive correlations with mean grain size and ignition loss, indicating that the concentrations of metallic elements in these sediments were dependent on grain size and the organic matter content. The concentrations of heavy metals in sediments from almost all of the stations were lower than two criterion values proposed by the National Oceanic and Atmospheric Administration (NOAA) in the United States. Based on the EF and $I_{geo}$ results, surface sediments were a little polluted for Cr and were moderately polluted for As. Our results suggest that more intensive studies are necessary in the future in order to determine the major source of As in intertidal sediment and to evaluate the As pollution level in macrobenthos.

치과 진료실의 미생물 오염도에 대한 4차 암모늄 화합물의 효과 (Effect of quaternary ammonium compounds on microbial contamination levels in dental clinics)

  • 백세연;박연정;최승호;김희재;김성택
    • 구강회복응용과학지
    • /
    • 제36권1호
    • /
    • pp.55-60
    • /
    • 2020
  • 물리적 항균효과를 나타내는 4차 암모늄 화합물을 치과 진료실 미생물 주요 오염 구역에 도포 후 시기별 오염도의 변화를 측정하고자 하였다. 4개의 국내외 치과병의원에서 미생물 감염이 쉬운 유닛체어 핸들, 타구대 표면, 핸드피스 거치대 등에 ATP (adenosine triphosphate) 모니터링 시스템과 ATP 표면검사 테스트 키트를 사용하여 항균제 도포 전과 후 시기별 오염도를 비교 측정하였다. 4차 암모늄 화합물 도포 전 구역별 미생물 오염도는 치과의사가 주로 사용하는 핸드피스 거치대가 가장 높았다. 도포 후 시기별 오염도의 변화를 분석한 결과 대부분의 진료실에서 현저한 오염도의 감소를 보였으며, 대략 4-6개월 정도 효과가 지속되는 양상을 보였다. 항균효과의 지속성과 최소량의 화학성분 노출이라는 장점으로 향후 대단위 후속연구를 통해 4차 암모늄 화합물이 치과 진료실에서 효과적으로 사용될 수 있을 것으로 기대된다.

토양.지하수오염원 관리우선순위 개략평가기법 개발 (Development of Preliminary Assessment Methodology for Priority Listing of Soil and Groundwater Contamination Sources)

  • 정승우;김영주;김재훈;황상일
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제16권6호
    • /
    • pp.106-112
    • /
    • 2011
  • This study developed preliminary assessment methodology for priority listing of soil and groundwater contamination sources, considering source characteristics, local environments and risk receptors. Source characteristics were evaluated by scoring relative risk of contamination sources. Local environments were evaluated by scoring annual rainfall, hydraulic conductivity of aquifer, and annual groundwater use. Risk receptors were evaluated by scoring local population, direct distance to surface water, direct distance to drinking-water wells. Scores of each parameter were allocated by analysing distribution of parameter values obtained from government databases. Distributed scores of source characteristics local environments: risk receptors were 12 : 12 : 12. The preliminary assessment scored 0 to 36 for each soil and groundwater sources. Inventory of soil and groundwater sources consisted of 7 categories. This study applied the preliminary assessment methodology to Manan-Gu, Anyang City, Korea. The number of car repair and washing facility was the largest in the contamination source inventory. Petroleum storage facilities showed the highest assessment score. The preliminary assessment methodology also indicated that Anyang-Dong was the priority section among Anyang-Dong, Suksu-Dong, Bakdal-Dong. This study is the first trial for relative ranking soil and groundwater contamination sources by considering source and local characteristics. Therefore, further researches and revision of the preliminary assessment methodology need to be pursued for various applications.

핵의학과 전용화장실에서 측정된 표면오염도 및 공간선량율에 대한 연구 (A Study on the Surface Contamination Level and Spatial Dose Rate Measured from NM Patients-Only Bathroom)

  • 문재승;정희일;정해성;신민용;김수근;박대성;김현기;김화산;이형남;안병필;이동호
    • 핵의학기술
    • /
    • 제16권1호
    • /
    • pp.38-43
    • /
    • 2012
  • 목적 : $^{18}F$-FDG 방사성핵종이 투여된 환자가 사용하는 전용화장실의 표면오염도 및 공간선량율을 측정하여 같은 구역 내에 근무하고 있는 작업종사자들에 미치는 영향에 대하여 고찰해 보고자 한다. 대상 및 방법 : 2011년 1월부터 2011년 6월까지 $^{18}F$-FDG 370 MBq (10 mCi) 방사성핵종이 투여된 후 전용화장실을 1회 사용한 대상 환자는 본원이 60case(그룹1), 부천성모병원은 일평균 환자 수에 따라 50case(그룹2)와 10case(그룹3)으로 분류하였다. 방사선 측정기를 이용한 측정시간은 08:00, 10:00, 13:00, 15:00, 17:00이었으며 측정부위는 좌변기 4부위, 세면대, 휴지통이었다. 병원별 전용화장실의 3개월간 피폭누적량을 측정하였으며 PET/CT를 운영하는 병원을 대상으로 설문조사를 실시하여 전용화장실 유무 및 종사자들의 이용현황에 대하여 알아보았다. 결과 : 그룹1, 그룹2, 그룹3에 대한 일평균 환자 수는 $12.18{\pm}1.33$명, $6.62{\pm}2.21$명, $10.5{\pm}1.58$명이었다. 그룹1, 그룹2, 그룹3에 대한 좌변기의 평균 표면오염도($Bq/cm^2$)는 $8.38{\pm}4.56$, $2.64{\pm}3.90$, $4.59{\pm}4.38$로 그룹1에서의 표면오염도가 그룹2, 그룹3보다 높은 것으로 나타났으나($p$<0.05) 1 m 높이에서의 표면오염도 및 공간선량율에서는 그룹3, 그룹2, 그룹1순으로 높게 나타났다($p$<0.05). 그룹1에서의 세면대 및 휴지통의 표면오염도($Bq/cm^2$)는 $0.12{\pm}0.12$, $25.26{\pm}22.55$이었다. 표면오염도 수준을 단계별로 구분하여 제시하여 보았을 때 측정시간별 표면오염도 차이는 그룹1이 그룹2, 그룹3보다 높게 나타났다($p$<0.05). 개인피폭선량계를 이용하여 측정된 피폭누적량은 본원이 0.78 mSv/3개월, 부천성가병원이 0.37 mSv/3개월이었다. 전용화장실의 공동사용에 대한 설문조사에서 조사대상 31개 병원 중에 16.12%인 5개병원에서 환자와 함께 이용하는 것으로 나타났다. 결론 : 일평균 환자수가 많을수록 전용화장실의 표면오염도가 높아지는 것으로 나타났다. 특히 휴지통의 표면오염도는 원자력법에서 고시하고 있는 기준값인 $4Bq/cm^2$를 훨씬 초과한 것으로 나타났으나 화장실 전체공간에 대한 피폭누적량은 작게 나타났다. 설문조사 결과를 참조해 볼 때 환자들과 같이 사용하는 기관들이 있었음으로 전용화장실 이용에 대한 특별한 주의와 적절한 제염이 필요할 것으로 사료된다.

  • PDF

자유표면과 반응하는 수직와류에 대한 표면점성계수와 표면장력의 영향 (The Effects of Surface Shear Viscosity and Surface Tension on a Columnar Vortex Interacting with a Free Surface)

  • 김경훈;손권;김석우
    • 한국가시화정보학회지
    • /
    • 제3권1호
    • /
    • pp.51-57
    • /
    • 2005
  • Vertices terminating at free surface have been investigated extensively. Most of investigations, however, are focused on surface parallel vortices and little has been known about surface normal vortex or columnar vortex. Visualized experimental results utilizing LIF technique are discussed fur the purpose of characterization of columnar vortex interacting with a clean and a contaminated free surfaces and a solid body interface in the present investigation. The results reveal that surface tension changes due to surface contamination although bulk viscosity remains constant and eventually the behavior of a columnar vortex interacting with a contaminated free surface and a solid body interface are totally different from the clean free surface case.

  • PDF