• Journal of Applied Biological Chemistry
• /
• v.59 no.1
• /
• pp.83-90
• /
• 2016

The aim of the present study was to evaluate the degree of metal contamination of the Turag River water and its suitability for irrigation. Twenty water samples were analyzed for physicochemical parameters and metals viz., calcium, magnesium, potassium (K), sodium, copper (Cu), zinc (Zn), iron (Fe), manganese (Mn), lead (Pb), cadmium (Cd), chromium (Cr), and nickel (Ni). All water samples were slightly alkaline to alkaline. Regarding electrical conductivity (EC), all samples were suitable for crop in soils with moderate permeability and leaching. Water samples were medium salinity and low alkalinity hazard classes. In terms of total dissolved solids (TDS), all samples were classified as freshwater. As per sodium adsorption ratio (SAR) and soluble sodium percentage (SSP), all samples were classified as excellent. No residual sodium carbonate (RSC) was detected in any of the samples, indicating suitability for irrigation; and all samples were considered very hard. Cr and Mn contents in all samples were above FAO guideline values and, therefore, these metals were considered toxic. Zn, Cu, Pb, Cd, and Ni concentrations were below acceptable limit for irrigation and do not pose a threat to soil environment. Significant relationships were found between EC and TDS, SAR and SSP, SAR and RSC, and SSP and RSC. The combinations of ions such as K-Zn, K-Fe, K-Cu, K-Mn, K-Pb, Zn-Fe, Zn-Cu, Zn-Mn, Fe-Mn, Cu-Mn, Cu-Pb and Mn-Pb exhibited significant correlation. This study revealed that Turag River water samples are contaminated with Cr and Mn. This fact should not be ignored because water contamination by metals may pose a threat to human health through food chain.

• Safety and Health at Work
• /
• v.2 no.3
• /
• pp.273-281
• /
• 2011

Objectives: Studies examining healthcare workers' exposure to antineoplastic drugs have focused on the drug preparation or drug administration areas. However, such an approach has probably underestimated the overall exposure risk as the drugs need to be delivered to the facility, transported internally and then disposed. The objective of this study is to determine whether drug contamination occurs throughout a facility and, simultaneously, to identify those job categories that are potentially exposed. Methods: This was a multi-site study based in Vancouver, British Columbia. Interviews were conducted to determine the departments where the drugs travel. Subsequent site observations were performed to ascertain those surfaces which frequently came into contact with antineoplastic drugs and to determine the job categories which are likely to contact these surfaces. Wipe samples were collected to quantify surface contamination. Results: Surface contamination was found in all six stages of the hospital medication system. Job categories consistently found to be at risk of exposure were nurses, pharmacists, pharmacy technicians, and pharmacy receivers. Up to 11 job categories per site may be at risk of exposure at some point during the hospital medication system. Conclusion: We found drug contamination on select surfaces at every stage of the medication system, which indicates the existence of an exposure potential throughout the facility. Our results suggest that a broader range of workers are potentially exposed than has been previously examined. These results will allow us to develop a more inclusive exposure assessment encompassing all healthcare workers that are at risk throughout the hospital medication system.

• Journal of Fashion Business
• /
• v.16 no.1
• /
• pp.16-25
• /
• 2012

As the test results for surface color, dyeing durability, antibiosis of cotton fabrics and silk fabrics dyed with Agastache rugosa extract, the following conclusions were obtained. The surface color of all the dyed fabrics was confirmed mostly as a GY system. As the result of chrominance(${\Delta}E_{ab}$) measurement, in the case of cotton fabrics the dyed fabrics treated with $Al_2(SO_4)_3$ mordant showed the highest value and in the case of silk fabrics the non-mordant dyed fabrics showed the highest value. The dyeing durability of test fabrics dyed with Agastache rugosa extract are as follows. As the test results of colorfastness to laundry for cotton dyed fabrics, the discoloration degree showed 1st-2nd grade and the contamination degree showed 4th-5th grade. As the test result of colorfastness to dry cleaning for silk dyed fabrics, the contamination degree showed from 1st to 3rd-4th grade. As the test results of colorfastness to acid artificial perspiration, the discoloration degree showed from 1st to 3rd-4th grade and the contamination degree showed from 3rd to 4th-5th grade. As the test results of colorfastness to alkaline artificial perspiration, the discoloration degree showed from 1st to 4th grade and the contamination degree showed from 3rd to 4th-5th grade. The colorfastness to sunlight showed from 1st to 2nd grade. The colorfastness to rubbing showed from 3rd to 4th-5th grade in dry process and from 2nd-3rd to 4th-5th grade in wet process. As the test results of antibiosis, the decrease rate of germs to virus Klebsiella pneumoniae and Staphylococcus aureus showed at least more than 99% after the wash of 10 times. As the test results of antifungal activity to mycete Trichophyton mentagrophytes and Aspergillus niger, the both cotton and silk dyed fabrics didn't gain the significant antifungal effect.

• Nuclear Engineering and Technology
• /
• v.2 no.2
• /
• pp.97-106
• /
• 1970

Radiation accidents which occured in the A.E.R.I. during last ten years are described (table 1). It seemed to the authors that some of these accidents were considered to be hazardous to man body and associated installations. This report deals with the following four major accidents involving body contamination incidents that our health physicists have been experienced. 1. Over-exposures (up to 130 rem) to the total body due to the mismanipulation in the Cobalt-60 gamma irradiation facility. 2. Floor surface contamination (up to 13 mrad/hr) and its spread out due to the mishandling of radioiodine contained in the bottle. 3. Body surface contamination and 0.36 uCi radioactivity accumulated in the thyroid gland of a worker due to the inhalation of gaseous iodine-131. 4. A void capsule due to the leakage out of the radium therapeutic source (3mg\ulcorner) These accidents were treated by definitely prompt action to protect the workers and associated installations from any radiation hazards and every possible efforts were made to confine the spread of radioactive contamination as small area as possible by means of elaborate decontamination work and monitoring.

• The Journal of Korean Society for Radiation Therapy
• /
• v.8 no.1
• /
• pp.41-54
• /
• 1996

The secondary electrons developed by interaction between primary beam and a tray mounted for blocks in Megavoltage irradiation result in excess soft radiation dose to the surface layer. To reduce this electron contamination, electron filters have been used to be attached under a tray. Various filters with Cu and Al plates in six different thickness and Cu/Al combined plates in 3 different thickness were tested to measure the reduction rate of secondary electron contamination to the surface layer. The measurement to find optimal filter was performed on 6MV linear accelerator in $10 cm{\times}10 cm$ field size and fixed 78.5cm source to measurement points distance from surface to maximum build up point in 2mm intervals. The result was analyzed as the ratio of measured doses with using filters, to standard doses of measured open beam. The result of this study was fellowing : 1. The contaminated low energy radiation were mainly produced by blocking tray. 2. The surface absorbed dose was slowly increased by increasing irradiation field size but rapidly increased at field size above $15cm{\times}15cm$. 3. Al plate upto 2.5mm thickness used as a filter was found to be inadequate due to the failure of reduction of the surface absorbed dose below doses of the under surface upto the maximal build up. Cu 0.5mm plate and Cu 0.28mm/A1 1.5mm compound plate were found to be optimal filters. 4. By using these 2 filters, the absorbed dose to the surface were effectively reduced $5.5\%$ in field size $4cm{\times}4cm,\;11.3\%$ in field size $10cm{\times}10cm,\;22.3\%$ in field size $25cm{\times}25cm$. 5. In field size $10cm{\times}10cm$, the absorbed dose to the surface of irradiation was reduced by setting TSD 20cm at least,. but effective and enough dose reduction could be achieved by setting TSD 30cm as 2 optimal filters used. 6. More surface dose absorbed at TSD less than 7.4cm with a tray and filters together indicated that soft radiation was also developed by filters. 7. The variation of PDD by the different size of irradiation field was minimal as 2 optimal filters used. There was also not different in variation of PDD according to using any of two different filters. 8. PDD was not effected either by various TSD or by using the different filter among two.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.05a
• /
• pp.35-36
• /
• 2010

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1997.05a
• /
• pp.87-91
• /
• 1997

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.10a
• /
• pp.460.2-460.2
• /
• 2003

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.05a
• /
• pp.227-228
• /
• 2018

• Journal of Radiation Protection and Research
• /
• v.30 no.3
• /
• pp.99-105
• /
• 2005

A model for evaluating radioactive contamination in the urban environment, named METRO-K, was developed as a basic step for accident consequence analysis in case of an accidental release. The three kind of radionuclides $(^{137}Cs,\;^{106}Ru,\;^{131}I)$ and the different chemical forms of iodine (particulate, organic and elemental forms) are considered in the model. The radioactive concentrations are evaluated for the five types of surface (roof, paved road, wall, lawn/soil, tree) as a function of time. Using the model, the contaminative impacts of the surfaces were intensively investigated with respect to with and without precipitation during the measurement periods of radionuclides in air. In addition, a practical application study was conducted using $^{137}Cs$ concentration in air and precipitation measured in an European country at the Chernobyl accident. As a result precipitation was an influential factor in surface contamination. The degree of contamination was strongly dependent on the types of radionuclide and surface. Precipitation was more influential in contamination of $^{137}Cs$ than that of $^{131}I$ (elemental form).