• Asian Journal of Turfgrass Science
• /
• v.17 no.1
• /
• pp.19-33
• /
• 2003

The objective of this study was to evaluate the effects of crumb rubber recycled from used tires as a soil incorporation and topdressing materials on a trafficked Korean lawngrass‘Zenith’(Zoysia japonica). In Exp 1, incorporation treatments included three particle sizes (PS: coarse =4∼6.35 mm, medium =2∼4 mm, and One : less than 2 mm in diameter) and two incorporation rate (IR: 10 and 20%). Wear treatments were applied 30 passes per day by compactor weights being 60 kg with soccer shoes. Topdressing treatments included three PS and two topdressing depth (TD: 5 and 10 mm). Wear treatments were the same as described in Exp 1. In Exp 1, the treatment with medium PS+IR 20 resulted in the tendency to have high total clipping yield. There was no significant difference in clipping yield, turfgrass visual color, coverage, and root length among the treatments. Compared to control, tissue Zn levels increased about 6.5-fold by the treatments. The treatment with fine PS +IR 20 caused a less peak deceleration than coarse PS +IR 10. Total porosity, air-filled porosity, and capillary porosity increased with fine PS +IR 20. In Exp 2, compared to controls, however, there was a difference in turfgrass visual color after the termination of traffic treatment. There was no difference in root length. The treatment with fine PS + TD 10 resulted in the highest total clipping yield. As a result of soil physical analysis, soil penetration resistance was reduced by the treatments. The treatment with coarse PS resulted in a less peak deceleration than fine PS. In conclusion, turfgrass growth was increased by crumb rubber incorporation which enhanced soil physical properties. The crumb rubber topdressing was able to cushion the crown tissue area while still providing a smooth and uniform surface, improve overall turfgrass quality, and reduce compaction.

• Journal of the Korean Geographical Society
• /
• v.42 no.6
• /
• pp.898-913
• /
• 2007

We examined soil properties and provenance of loess-paleosol sequences at the Daebo Granite area of Buan, Jeonbuk Province, South Korea. The section consists of the surface layer, Layer 1(paleosol), Layer 2(loess), Layer 3(paleosol), Layer 4(loess), and Layer 5(paleosol), from top to bottom and thickness of the exposed section is approximately 280cm. The magnetic susceptibility values show the distinct variations between the loess- and the paleosol layer. Even though pH, ORP, water content, and soil hardness do not display the obvious differences in the section, the organic content indicates the variation similar to those of the magnetic susceptibility. In the respect of the soil colors measured under 3 conditions, although the variations of the wet soil color exceedingly reflect the difference of the layers, these variations are obscure in some points in the section due to the characteristics of the Munsell color system. Based on the geomorphological properties, sedimentary structure, the difference of the major element composition and the condrite-normalized rare earth element(REE) patterns showing the clear difference from the adjacent bedrocks and stream sediments and the similarity to those of the Chinese Loess Plateau, it is suggested that the section was formed by the material originated from the Chinese Loess Plateau and peripheral areas. However, because the material experienced the alteration after sedimentation under the environment of the sediment area, it has the properties different from the material in the provenance areas. This phenomenon may result in the climatic condition of Korea, especially in precipitation.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.4
• /
• pp.142-153
• /
• 2011

'Silla Monument Stone in Jungseong-ri, Pohang' was discovered in Pohang City, Gyeongsangbuk Province of Korea in 2009. The monument stone with irregular shape has dimensions of maximum height of 105cm, width of 47.6~49.6cm, thickness of 13.8~14.7cm and weight of 115kg. The results of monument stone was found to be granitite. Conservation treatment procedure was carried out in the order of production of Weathering map, cleaning of surface pollutants, consolidation using ethyl silicate. Black pollutant(crust) that covered more than 60% of the surface was analyzed first in order to remove the pollutants on the surface of the monumental stone by cleaning of surface pollutants using laser. The purpose on analysis was not only to verify the pollutants on the stone but also to carry out preliminary cleaning by securing rocks with same pollutant as the monumental stone. As the results of analysis using p-XRF(PMI. INNOV-X, USA) on the site, high level of Mn and Fe were detected, and the analysis of small section that had been fallen off with SEM/EDX for the purpose of quantitative analysis also detected high level of Mn. The Similar contaminants on Stone secured in the manner described above were made into 10 samples ($5cm{\times}5cm$) and was subjected to preliminary cleaning by Nd-YAG Laser(Laser&Physics, Korea). The results of surface observation through portable microscope during cleaning revealed that the power of 460mJ, wavelength of 1064nm and irradiation frequency of 1,800~2,300 per $25cm^2$ were most effective. Evaluation on the preservative treatment was made through confirmation of the extent of removal through color-difference meter measurement and component analysis prior to and following removal of the pollutants. As the result of color-difference meter measurement increase in the brightness was evidenced by the increase in the brightness ($L^*$)value from 33 to 49, and it was possible to ascertain the reduction in the pollutants as the content of Mn was reduced by about 80% from $50,000{\pm}5,000ppm$ to $10,000{\pm}2,000pmm$ from the result of component analysis.

• Korean Journal of Remote Sensing
• /
• v.30 no.2
• /
• pp.275-292
• /
• 2014

The objective of this study is to determine Tasseled Cap Transformation (TCT) coefficients for the Geostationary Ocean Color Imager (GOCI). TCT is traditional method of analyzing the characteristics of the land area from multi spectral sensor data. TCT coefficients for a new sensor must be estimated individually because of different sensor characteristics of each sensor. Although the primary objective of the GOCI is for ocean color study, one half of the scene covers land area with typical land observing channels in Visible-Near InfraRed (VNIR). The GOCI has a unique capability to acquire eight scenes per day. This advantage of high temporal resolution can be utilized for detecting daily variation of land surface. The GOCI TCT offers a great potential for application in near-real time analysis and interpretation of land cover characteristics. TCT generally represents information of "Brightness", "Greenness" and "Wetness". However, in the case of the GOCI is not able to provide "Wetness" due to lack of ShortWave InfraRed (SWIR) band. To maximize the utilization of high temporal resolution, "Wetness" should be provided. In order to obtain "Wetness", the linear regression method was used to align the GOCI Principal Component Analysis (PCA) space with the MODIS TCT space. The GOCI TCT coefficients obtained by this method have different values according to observation time due to the characteristics of geostationary earth orbit. To examine these differences, the correlation between the GOCI TCT and the MODIS TCT were compared. As a result, while the GOCI TCT coefficients of "Brightness" and "Greenness" were selected at 4h, the GOCI TCT coefficient of "Wetness" was selected at 2h. To assess the adequacy of the resulting GOCI TCT coefficients, the GOCI TCT data were compared to the MODIS TCT image and several land parameters. The land cover classification of the GOCI TCT image was expressed more precisely than the MODIS TCT image. The distribution of land cover classification of the GOCI TCT space showed meaningful results. Also, "Brightness", "Greenness", and "Wetness" of the GOCI TCT data showed a relatively high correlation with Albedo ($R^2$ = 0.75), Normalized Difference Vegetation Index (NDVI) ($R^2$ = 0.97), and Normalized Difference Moisture Index (NDMI) ($R^2$ = 0.77), respectively. These results indicate the suitability of the GOCI TCT coefficients.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.392-400
• /
• 2001

This paper proposes an illuminant estimation algorithm that estimates the spectral power distribution of an incident light source from a single image. The proposed illumination recovery procedure has two phases. First, the surface spectral reflectances are recovered in the maximum achromatic region (MAR) which is the most achromatic and highly bright region of an image after removing partially the effect of illumination using a modified gray world algorithm. Here, the surface reflectances of MAR are estimated using the principal component analysis method along with a set of given 1269 Munsell samples. Second, the Population of reflected lights is determined with 1269 Munsell samples and a set of illuminations then the spectral distribution of re(looted lights of MAR is selected from the spectral database. That is, color differences are compared between the reflected lights of the MAR and the spectral database, which is the set of reflected lights built by the given set of Munsell samples and illuminants. Then the closest colors from the spectral database are selected. Finally, the illuminant of an image can be calculated dividing the average spectral distributions of reflected lights of MAR by the average surface reflectances of the MAR. In order to evaluate the proposed algorithm, experiments with artificial scenes, which are exposed to chromatic illuminants, were performed and the spectral distribution of estimated illumination and color difference are compared with results of the conventional method.

• Journal of Environmental Science International
• /
• v.24 no.5
• /
• pp.633-639
• /
• 2015

The experience of natural dyeing is expected to be effective in promoting health through good exercise, in giving emotional stability based on the functional aromatic components of the dyeing material, and in improving self-esteem and increasing positive experiences through the behavior of creation. A natural dyeing material easily found around us, artemisia has long been used in food and Oriental medicine and was recently found to contain antioxidative, anticancer, deodorizing, antibacterial, anti-obesity, and anti-diabetes substances through chemical analysis. It has also been reported that group reminiscence therapy using the fragrance of artemisia is effective in relieving pain and depression and in promoting ego integrity in the elderly population. This study aimed to make a comparative analysis of dyeability, washing fastness, and deodorization between Artemisia princeps, Artemisia iwayomogi, and Artemisia annua, all of which are considered to be healthful and functional dyeing materials, among about thirty domestic plants in the genus of Artemisia and to provide basic data concerning natural dyeing in mind-peace education for the silver generation. The fabric dyed and post-mordanted at $80^{\circ}C$ for 40 minutes showed the greatest surface color variation; in this condition, artemisia princes (32.29) gave the greatest color difference, followed by artemisia iwayomogi (31.07) and artemisia annua (26.17). While all the types of artemisia were excellent in washing fastness, dry-cleaning fastness, and rubbing fastness at the fourth- or fifth-grade, light fastness was at the third grade for artemisia princes, at the second to third grade for artemisia annua, and at the second grade for artemisia iwayomogi; therefore, artemisia princes was found to give better fastness than the other two types of artemisia. In determining functionality of the fabric dyed with artemisia, deodorization test also found that the fabric dyed with artemisia princes had 20% higher deodorization.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.3
• /
• pp.135-141
• /
• 2009

In this paper, Tagetes extracts were extracted from leave, root, stem and flower at $100^{\circ}C$ for 20 minutes. Silk fabrics were dyed with Tatetes Patula L. to investigate the dyeing properties in accordance with dye concentration, pH, temperature, time of pre-, simul- and post-treatment of mordants using the three types of mordants. As a result, the surface color of the silk fabrics was yellowish regardless of the types of mordants. However, the a values were decreased and b values were increased in the order of the dyeing using Al>Cu>Fe: Al mordanted silk fabrics were appeared in greenish yellow and Fe mordanted silk fabrics were done in redish yellow. K/S values of the silk fabrics treated with Fe mordant were 3 times higher than those of Al and Cu mordants according to the increase in dye concentration. This behaviour was shown even in the increase of mordant concentration due to the interaction of mordant and pigments of Tatetes Patula L. But, the types of mordants did not affect because the equilibrium was obtained in 20 minutes in a similar way. And it showed that the highest K/S value of the silk fabrics studied was pH 4 and $80^{\circ}C$ regardless of the types of mordants.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3800-3805
• /
• 2012

Infrared(IR) reflective black cool pigment and paint which is used for interior/exterior materials(IR reflectance >30%) to prevent heat island effect and to increase energy efficiency were studied. Cool pigment was synthesized using mixture of $Fe_2O_3$ and $Cr_2O_3$ with calcination from 900 to $1,200^{\circ}C$. Cool paint was prepared by formulation of cool pigment, acrylic resins, and other additives. Results showed that optimum color fixation of pigment obtained by mole ratio of Fe to Cr was 0.9 with calcination temperature at $1,000^{\circ}C$. The cool paint formulated by 20% pigment and 1.5% dispersive additive with $125{\mu}m$ thickness of coated layer showed optimum IR reflectance. Temperature difference on surface between cool paint and ordinary paint(STD) was $36.5^{\circ}C$ and IR reflectance(TSR) was 39.3% at wavelength from 700 to 2,500nm. And color change was not detected during 500hrs weathering test.

• Conservation Science in Museum
• /
• v.3
• /
• pp.29-36
• /
• 2001

The hat excavated from the tomb of Hojeo-myon Wonsung-gun in Kangwon province was dry-cleaned and restored. The hat was made of wool felt and decorated with several strands of silk cord. It was very dirty and moth-eaten. After getting rid of the particle soils on a surface with painting brush, the hat was dry-cleaned using perchloroethylene applying the minimum force, and blotting paper was used for drying. During cleaning, it was supported by the stainless steel net. The weight loss was 7.94% after cleaning. The soils sticked on the hat was removed clearly. The texture of the hat became softer after cleaning. Color difference(∆E) was 2.57, which is a noticeable change. The color became clear and changed to the red and yellow range. After dry-cleaning, the hat was repaired. Dislocated silk cords were fixed to the right place by stitching with silk yarn. To keep the shape of the hat, it should be supported by a hat-shaped stiff net during exibition and storing.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.529-537
• /
• 2005

Ssamjang samples were prepared by central composite design for five independent variables, Gochujang mash aging period $(X_1)$, Doenjang aging period $(X_2)$, Doenjang content $(X_3)$, sterilization temperature $(X_4)$ and storage temperature $(X_5)$. Browning characteristics of Ssamjang were analyzed such as water activity, free amino acids, free sugars and color during storage. Water activities of Ssamjang were ranged from 0.605 to 0.666 at the beginning of storage, and were shown to be the highest at the 8th week of storage and then decreased gradually. Among free amino acids the content of glutamic acid was the highest. Proline, leucine, phenylalanine, lysine and serine were slightly higher than the others. Larger amounts of free amino acids and free sugars were observed from the sample sterilized at $60^{\circ}C$ when compared to that at $70^{\circ}C$. Glucose, fructose and maltose as free sugars were identified from Ssamjang and glucose content was the largest among. During the storage, lightness $(L^*)$, redness $(a^*)$ and yellowness $(b^*)$ of Ssamjang were decreased and total color difference $({\Delta}E)$ was increased. The color changes in the sample surface were more affected by temperature of which storage temperature was more influenced than sterilization temperature.