• BMB Reports
• /
• 제33권3호
• /
• pp.279-284
• /
• 2000

Using fluorescence probes, 2-(9-anthroyloxy) stearic acid (2- AS) and 12-(9-anthroyloxy) stearic acid (12-AS), we determined the differential effects of local anesthetics (tetracaine-HCI, bupivacaine-HCI, lidocaine-HCI, prilocaine-HCI and procaine-HCI) on the differential rotational rate between the surface (in carbon number 2 and its surroundings including the head group) and the hydrocarbon interior (in carbon number 12 and its surroundings) of the outer monolayer of the total phospholipid fraction liposome that is extracted from synaptosomal plasma membrane vesicles. The anisotropy (r) values for the hydrocarbon interior and the surface region of the liposome outer monolayer were$0.051{\pm}0.001$ and $0.096{\pm}0.001,$ respectively. This means that the rate of rotational mobility in the hydrocarbon interior is faster than that of the surface region. Local anesthetics in a dosedependent manner decreased the anisotropy of 12-AS in the hydrocarbon interior of the liposome outer monolayer, but increased the anisotropy of 2-AS in the surface region of the monolayer. These results indicate that local anesthetics have significant disordering effects on the hydrocarbon interior, but have significant ordering effects on the surface region of the liposome outer monolayer.

• Archives of Plastic Surgery
• /
• 제32권3호
• /
• pp.311-313
• /
• 2005

Generally, many Asian women tend to dislike the square jaw, as they believe it makes the face look wider, giving a stubborn and strong impression. Contouring of the mandible is therefore a relatively common aesthetic procedure among Asians. These days, the use of botulinum toxin for contouring of the lower face offer simple alternative to surgery. Motor point, which is the site over a muscle where its contraction may be elicited by a minimal intensity short duration electrical stimulus, is the optimal injection point of botulinum toxin. Study was undertaken to identify the location of motor point of the masseter muscle and the skin surface landmark. First, the thickest point of the masseter muscle was inspected through palpation and inspection by 3 different individual plastic surgeons and then compound muscle action potentials(CMAPs) of masseter muscle in 15 health volunteers were recorded using EMG. For the localization of the measured points, line between lateral canthus to the mandibular angle was used. Location of motor points were mapped to skin surface from lateral canthus in a percentage of the distance along the landmark line and in distance in millimeters. The clinical injection point was located at 71.69 percentile and 7.3 mm of the landmark line. The motor point test was located at 72.54 percentile and 7.1 mm of the landmark line. The depth of motor point was 16mm. There was no statistically significant difference between the clinical injection point and the motor point. We conclude that surface mapping of motor point of the masseter muscle would increase accessibility and accuracy in botulinum toxin injection for contouring of the lower face.

• 한국표면공학회지
• /
• 제37권5호
• /
• pp.249-252
• /
• 2004

Effects of HA and TiN coating on the electrochemical characteristics of Ti-6AI-4V alloys for bone plates were investigated using various test methods. Ti-6AI-4V alloys were fabricated by using a vacuum induction furnace and bone plates were made by laser cutting and polishing. HA was made of extracted tooth sintered and then tooth ash was used as HA coating target. The TiN and HA film coating on the surface were carried on using electron-beam physical vapor deposition (EB-PVD) method. The corrosion behaviors of the samples were examined through potentiodynamic method in 0.9% NaCI solutions at $36.5\pm$$1^{\circ}C$ and corrosion surface was observed using SEM and XPS. The surface roughness of TiN coated bone plates was lower than that of tooth ash coated plates. The structure of TiN coated layer showed the columnar structure and tooth ash coated layer showed equiaxed and anisotrophic structure. The corrosion potential of the TiN coated specimen is comparatively high. The active current density of TiN and tooth ash coated alloy showed the range of about $1.0xl0^{-5}$ $A\textrm{cm}^2$, whereas that of the non-coated alloy was$ 1.0xl0^{-4}$ $A\textrm{cm}^2$. The active current densities of HA and TiN coated bone plates were smaller than that of non-coated bone plates in 0.9% NaCl solution. The pitting potential of TiN and HA coated alloy is more drastically increased than that of the non-coated alloy. The pit number and pit size of TiN and HA coated alloy decreased in compared with those of non-coated alloy. For the coated samples, corrosion resistance increased in the order of TiN coated, tooth ash coated, and non-coated alloy.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권1호
• /
• pp.52-59
• /
• 2008

The geometric design of an implant surface may play an important role in affecting early osseointegration. It is well known that the porous surfaced implant had much benefits for the osseointegration and the early stability of implant. However, the porous surfaced implant had weakness from the transgingival contamitants, and it resulted in alveolar bone loss. The other problem identified with porous surface implant is the loss of physical properties resulting from the bead sintering process. In this study, we developed the new bead coating implant to overcome the disadvantages of porous surfaced implant. Ti-6Al-4V beads were supplied from STARMET (USA). The beads were prepared by a plasma rotating electrode process (PREP) and had a nearly spherical shape with a diameter of 75-150 ${\mu}m$. Two types of titanium implants were supplied by KJ Meditech (Korea). One is an external hexa system (External type) and the other is an internal system with threads (Internal type). The implants were pasted with beads using polyvinylalcohol solution as a binder, and then sintered at 1250 $^{\circ}C$ for 2 hours in vacuum of $10^{-5}$ torr. The resulting porous structure was 400-500 ${\mu}m$ thick and consisted of three to four bead layers bonded to each other and the implant. The pore size was in the range of 50-150 ${\mu}m$ and the porosity was 30-40 % in volume. The aim of this study was to evaluate the osseointegration of the newly developed dental implant. The experimental implants (n=16) were inserted in the unilateral femur of 4 mongrel dogs. All animals were killed at 8 weeks after implantation, and samples were harvested for hitological examination. All bead coated porous implants were successfully osseointegrated with peripheral bone. The average bone-implant contact ratios were 84.6 % (External type) and 81.5 % (Internal type). In the modified Goldner's trichrome staining, new generated mature bones were observed at the implant interface at 8 weeks after implantation. Although, further studies are required, we could conclude that the newly developed vacuum sintered Ti-6Al-4V bead coating implant was strong enough to resist the implant insertion force, and it was easily osseointegrated with peripheral bone.

• Journal of the Korean Wood Science and Technology
• /
• 제34권4호
• /
• pp.1-8
• /
• 2006

제조 온도에 따른 목탄의 해부학적 특성을 주사전자현미경법으로 조사하였다. 목탄은 실험실용 전기로를 이용하여 $400^{\circ}C$, $600^{\circ}C$, $800^{\circ}C$, $1000^{\circ}C$의 각 온도 조건에서 굴참나무재를 10분간 탄화시켜 제조하였다. 관찰 결과 목탄의 구조는 제조 온도에 따라 큰 차이를 보였다. $400^{\circ}C$에서 제조한 목탄의 횡단면은 깨끗하게 나타났으나 온도 증가에 따라 거칠고 할렬이 많은 단면을 나타냈다. 세포벽은 벽층 구조가 소실되고 유리와 같이 매끄럽고 균질한 구조를 보여주었다. $400^{\circ}C$에서 제조한 목탄은 유세포 상호간에 간극이 거의 없었으나 $600^{\circ}C$ 이상에서는 유세포 간에 분리가 발생하여 간극이 관찰되었다. 방사유세포와 축방향유세포의 표면에는 직경 $2{\sim}4{\mu}m$의 사마귀 모양의 돌기물이 다수 관찰되었고, $600^{\circ}C$ 이상에서 광방사조직에 커다란 할열할렬이 자주 발생하였다. 결정 세포 중에 존재하는 결정의 표면은 제조 온도에 따라 다르게 나타났다. 즉, $400^{\circ}C$와 $600^{\circ}C$에서 제탄한 목탄 중의 결정은 매끄러운 표면을 나타내고 있으나 $800^{\circ}C$ 이상에서 제조한 목탄의 것은 표면이 거칠고 작은 구멍이 나타나 스폰지와 같은 외형을 보여주었다.

• Applied Microscopy
• /
• 제33권2호
• /
• pp.145-154
• /
• 2003

본 연구는 후각점막에 내재하는 zinc의 분포를 형태학적으로 뚜렷이 보여준 예가 없기에 조직화학적으로 염색한 후 광학 및 전자현미경으로 이들의 분포를 기술하고자 하였다. 실험동물로는 성숙한 수컷 랫드(SD 계통)를 사용하였다. 우선 동물은 전신마취시킨 후 만들어진 selenium 용액 $100{\mu}l$를 복강에 주사하였고(i.p 실험군), 다른 방법으로는 selenium 용액 $100{\mu}l$를 비강 깁숙히 플라스틱관을 삽입한 후 Hamilton 주사기로 한 방울씩 떨어뜨렸다(i.n 실험군). 후각점막내 zinc를 조직화학법으로 동정하기 위해서 zinc 특이성이 높은 AMG법(Danscher, 1985)을 이용하였다. 각 실험군의 동물은 주사 후 2시간에 이르러 3% Glutaraldehyde 고정액으로 관류함으로써 희생시켰다. 고정후 비중격을 포함하여 후각부위를 떼어낸 수 $30{\mu}l$ 두께의 관상절편을 만들었다. AMG 반응이 끝나면 toluene blue (TB)로 대조염색하고, 알코올과 자일렌 등을 이용한 탈수과정 및 청명과정을 거쳐 광학현미경하에서 관찰하였다. 전자현미경적 절편을 만들기 위해 전자현미경 관찰을 위한 실험으로 vibratome을 사용하여, $100{\mu}m$ 두께의 가로절편을 만들었고, AMG염색이 끝나면 일반적인 전자현미경적 관찰을 위한 일련의 과정을 거쳐 투과전자현미경하에서 관찰하였다. Selenium 용액을 복강에 투여한 i.p 실험군에서는 $30{\mu}m$ 두께의 후각점막의 상층부와 기저부에서 강한 AMG 반응산물(silver grains)이 관찰되었으나 기저막아래 고유판에서는 전혀 관찰되지 않았다. 반면 selenium 용액을 비강점막에 직접 도포한 i.n 실험군에서는 i.p 실험군과 같이 후각점막에서 강한 AMG 반응이 관찰되었을 뿐만 아니라 이러한 반응이 기저막내 후각실의 주행을 따라 관찰되었다. 투과전자현미경으로 관찰된 후각상피에서는 AMG 과립이 지지세포의 세포 상층부에서 관찰되는 분비과립에 국한되는 소견이며, 이곳에서 관찰된 AMG은 과립(silver grains)은 원형 또는 난원형으로 그 크기는 다양하였다. 반면 세포체 하부에서 관찰된 AMG grains은 주로 용해소체위에서 밀집되어 관찰되었으며, 핵주변부 및 세포사이공간(intercellular space)에서는 AMG grains이 낱개로 구분, 관찰되었다. 한편 i.n 실험군에서 관찰된 후각점막의 전반적인 구조가 손상된 소견을 보였으며, 지지세포의 위쪽에서는 전자밀도가 높고 간상의 crystalloid structure가 다수 관찰되었고, 이들 구조에 다수의 AMG 과립이 붙어 있었다. 본 연구의 결과를 요약하면 랫드 후각점막에 존재하는 zinc는 지지세포의 분비과립과 후각세포의 축삭다발인 후각실에서 관찰되었는데 이는 zinc가 후각기능과 매우 밀접한 관련있음을 시사하며, 이는 향후 후각기능과 zinc의 연관성을 연구하는데 소중한 자료가 될 것으로 믿는다. 또한 본 연구의 결과는 후각점막의 이상으로 나타나는 여러 가지 질환의 병리에서 zinc가 영위하는 신경생물학적 기능을 밝히는데 유용한 기초자료가 될 수 있을 것으로 기대한다.

• 대한치과보철학회지
• /
• 제53권1호
• /
• pp.9-18
• /
• 2015

목적: 본 연구는 Tricalcium phosphate 입자를 사용한 모재분사 후 양극산화처리를 한 임플란트 표면의 특성을 분석하고, 골모유사세포의 반응을 평가하고자 하였다. 재료 및 방법: 직경 10 mm, 두께 3.0 mm 크기의 Grade IV 타이타늄 디스크를 시편으로 사용하였으며, 양극산화처리(ASD)군, 모재 분사 후 양극산화(RBM/ASD)군, 대조군(machined surface)으로 나누어 표면처리하였다. 표면처리 후 FE-SEM, 에너지분산분광기와 주사전자현미경을 사용하여 표면특성을 평가하였다. 세포의 부착을 평가하기 위해 골모유사세포를 이용해 crystal violet assay를 통해 세포부착을 평가하고, 세포 형태는 공초점 레이저 현미경을 사용하여 관찰하였다. 세포증식을 평가하기 위해 XTT 시험을, 세포분화는 역전사 중합효소연쇄반응을 사용하였으며 침착된 칼슘의 양을 측정하기 위해 Alizarin red S stain 을 이용하였다. 비교분석은 one-way ANOVA (SPSS version 18.0)로 유의수준 5%에서 검정하였다. 결과: ASD군과 RBM/ASD군에서, 분화구 모양의 표면 형상이 나타났으며, 대조군과 비교하여 산소와 인산 이온이 관찰되었다. 단위면적당 거칠기는 대조군에서 $0.08{\pm}0.04{\mu}m$, ASD군에서 $0.52{\pm}0.14{\mu}m$, RBM/ASD군에서 $1.45{\pm}0.25{\mu}m$를 보였다. 세포반응실험에서, ASD군과 RBM/ASD군이 대조군에 비해 세포의 부착정도가 높았으며 대조군이 세포증식에서 가장 높은 값을 보였다(P<.05). RT-PCR 실험에서, RBM/ASD군이 다른 군들보다 높은 ALP를 보였다(P<.05). ASD군과 비교했을 때 RBM/ASD군은 세포부착과 증식 정도에서 큰 값을 보였다(P<.05). 결론: 본 연구의 한계내에서 모재분사 후 양극산화 처리한 티타늄 표면 처리 방식이 단순 양극산화 처리한 군이나 대조군보다 골모유사세포의 반응에 효과적인 방법임을 확인하였다.

• 대한의생명과학회지
• /
• 제14권4호
• /
• pp.203-210
• /
• 2008

One of cell surface receptor proteins, human folate receptor (hFR) involves in the uptake of folates through cell membrane into cytoplasm, and is anchored to the plasma membrane by a fatty acid linkage, which has been identified in some cells as a glycosylphosphatidylinositol (GPI)-tailed protein with a molecular mass of about 40 kDa. The hFR is released by phosphatidylinositol phospholipase C (PI-PLC) because it contains fatty acids and inositol on the GPI tail. Caveolin decorates the cytoplasmic surface of caveolae and has been proposed to have a structural role in maintaining caveolae. It is unknown whether caveolin is involved in targeting, and is necessary for the function of GPI-tailed proteins. To compare the ability of folic acid binding, internalization and expression of hFR, and the effect of caveolin at the both apical and basolateral side of cell surfaces in Chinese hamster ovary (CHO) clone cells overexpressed the hFR and/or caveolin. Our present results suggest a possibility that the overexpression of caveolin does not be involved in expression of hFR, but plays a role as a factor in PI-PLC releasing kinetics, and for a regulation of formation, processing and function of hFR in CHO clone cells overexpressed cavcolin.

• The Journal of Korean Physical Therapy
• /
• 제32권5호
• /
• pp.290-294
• /
• 2020

Purpose: Many studies have reported increased muscle activities in treatments using kinesio tape. However, most studies have focused on only muscles, so the effects of kinesio tape on structures other than the muscles are unknown. The purpose of this study is to explore the effect of kinesio tape for the fascia on trunk muscle activity during plank. Methods: Eighteen healthy participants took part in this study. The participants were asked to perform the plank in two conditions: on stable surface and unstable surface. Two kinesio tapes were attached along the spiral line introduced in the anatomy train. EMG was measured in each condition. EMG data were collected before and after attaching kinesio tape in each condition. Repeated analysis of variance (repeated ANOVA) was conducted to compare EMG activities levels between conditions. Results: EMG activities levels of trunk muscles, especially rectus abdominis and erector spinae activities were significantly increased during the plank with KT on both stable and unstable surfaces. Conclusion: KT applying on the fascia of targeted muscle increases the muscle activity. Therefore, we can also focus on the fascia to increase muscle activities not only on muscles.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.915-918
• /
• 2005

Advances in Information Technology and in Biomedicine have created new uses for CAD technology with many novel and important biomedical applications. Such applications can be found, for example, in the design and modeling of orthopedics, medical implants, and tissue modeling in which CAD can be used to describe the morphology, heterogeneity, and organizational structure of tissue and anatomy. CAD has also played an important role in computer-aided tissue engineering for biomimetic design, analysis, simulation and freeform fabrication of tissue scaffolds and substitutes. And all the applications require precision geometry of the organs or bones of each patient. But the geometry information currently used is polygon model with none solid geometry and is so rough that it cannot be utilized for accurate analysis, simulation and fabrication. Therefore a case study is performed to deduce a transformation method to build free form surface from a rough polygon data or medical images currently used in the application. This paper describes the transformation procedure in detail and the considerations for accurate organ modeling are discussed.