• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.4 s.148
• /
• pp.512-520
• /
• 2006

The effects of flexibilities of supporting structures on shaft alignment are growing as ship sizes are Increasing mainly for container carrier and LNG carrier. But, most of classification societies not only do not suggest any quantitative guidelines about the flexibilities but also do not have shaft alignment design program considering the flexibility of supporting structures. A newly developed program, which is based on innovative shaft alignment technologies including nonlinear elastic multi-support bearing concept and hull deflection database approach, has S basic modules : 1)fully automated finite element generation module, 2) hull deflection database and it's mapping module on bearings, 3) squeezing and oil film pressure calculation module, 4) optimization module and 5) gap & sag calculation module. First module can generate finite element model including shafts, bearings, bearing seats, hull and engine housing without any misalignment of nodes. Hull deflection database module has built-in absolute deflection data for various ship types, sizes and loading conditions and imposes the transformed relative deflection data on shafting system. The squeezing of lining material and oil film pressures, which are relatively solved by Hertz contact theory and built-in hydrodynamic engine, can be calculated and visualized by pressure calculation module. One of the most representative capabilities is an optimization module based on both DOE and Hooke-Jeeves algorithm.

• Land and Housing Review
• /
• v.7 no.2
• /
• pp.87-95
• /
• 2016

Housing benefits service that was implemented according to the National Basic Livelihood Security Act in 2002 has been changed with the enactment of "Housing benefits Law"(2014.1.24). Though the service was conducted for 13 years to improve the living environment of recipient households and create self-supporting jobs for low-income, there was a limit to ensure the efficiency due to variations in the administrative act and implementation in local governments. For that reason, the sales account and the profits of self-supporting enterprises and their cooperative in housing welfare sector that played a pivotal role had gone through many ups and downs and that is why the national coalition of self-supporting enterprises that were newly formed are forced to take self-effort and play a leading role for the improvement of future beneficiaries' satisfaction, namely to develop the level of service to keep the decent jobs consistent for low-income while responding institutional policy change and the demands for improving the home-amelioration system. Accordingly, this article has attempted to supplement existing research on housing-benefits service and determine how the field can keep pace with the new institutional environment. As a result, first, Central self-supporting enterprises provide high specialized-quality services to low-income families, second, central self-supporting enterprises induce to transition customized service agencies for improving the quality of residential housing benefits, Third, Housing self-supporting enterprises should correspondence with institutional change through the provision of explicit guidelines in relating to housing-service amelioration, the last, business practical process shall be accompanied by a consistent basis for innovative and procedural standards.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.19-27
• /
• 2020

On an offshore plant topside, various types of offshore facilities for processing energy resources, such as oil and gas, and equipment and outfitting for connecting these facilities are installed in a limited space. An offshore plant superstructure is composed of numerous supporting rack structures and reinforcements for securing and supporting offshore installations and the related equipment. This paper describes the development of design support software to support this superstructure design efficiently. The developed design support software, which was based on AVEVA Marine's PML(Programmable Macro Language), supports the parametric method for superstructure design. A method of batch 3D modeling from 2D drawings for supporting rack structure produced in the basic and detailed design was also developed using AutoLisp. In addition, through the application example of superstructure module design, the design support software introduced in this paper can be expected to reduce the design time by more than 90% compared to the use of only basic functions of AVEVA PDMS.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.251-258
• /
• 2005

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings (HDB) in an HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Reynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigen value problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.572-578
• /
• 2003

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings in a HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Raynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigenvalue problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

• Nuclear Engineering and Technology
• /
• v.28 no.1
• /
• pp.17-26
• /
• 1996

The in-reactor fuel rod support conditions against the fretting wear-induced damage can be evaluated by residual spacer grid spring deflection or rod-to-grid gap. In order to evaluate the impact of fuel design parameters on the fretting wear-induced damage, a simulation methodology of the in-reactor fuel rod supporting conditions as a function of burnup has been developed and implemented in the GRIDFORCE program. The simulation methodology takes into account cladding creep rate, initial spring deflection, initial spring force, and spring force relaxation rate as the key fuel design parameters affecting the in-reactor fuel rod supporting conditions. Based on the parametric studies on these key parameters, it is found that the initial spring deflection, the spring force relaxation rate and cladding creepdown rate are in the order of the impact on the in-reactor fuel rod supporting conditions. Application of this simulation methodology to the fretting wear-induced failure experienced in a commercial plant indicates that this methodology can be utilized as an effective tool in evaluating the capability of newly developed cladding materials and/or new spacer grid designs against the fretting wear-induced damage.

• The KIPS Transactions:PartD
• /
• v.9D no.4
• /
• pp.651-658
• /
• 2002

This paper suggests the scenario composition supporting method, which can be used to perform integration test based on specification, and implemented a scenario composition supporting tool. To compose scenario for object-oriented integration testing, requirement specification, Process definition table and program to table relation diagram are used. In addition, requirement trace table is created. It can check user's requirements, quickly and exactly, dividing former three fables into the stages of requirement analysis, design, and test. The output of scenario composition supporting tool plays a guide part in composing scenario. This tool can reduce scenario composition effort of quality for the checking team and prevent an omission of requirement and input of errors during the test.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.6
• /
• pp.1628-1645
• /
• 2015

This study was designed to analyze the present condition of the lifelong education field training program and to implement the need assessment of field training program based on the job model application. In order to achieve these goals, surveys were conducted through questionnaires and in-depth interviews targeting staffs of lifelong education institution in Busan area. The 115 subjects were analyzed by frequency distribution, the paired samples t-test, and the Borich's need analysis. The result showed that the field training program was poorly executed during the year of 2013 due to deficiency of certified practitioners and systematic guidelines. Also, the most highly demanded tasks were promoting change, networking, planning, developing programs and conducting surveys among various roles of lifelong educators. On the other hand, the need for the assisting and supporting programs were relatively low. Finally, this study concluded the need for developing systematic guidelines and for accrediting as a lifelong education field training institution nationwide. The results of this study would ultimately contribute to enhance the quality of lifelong education field training program.

• Journal of Korean Academy of Nursing Administration
• /
• v.8 no.2
• /
• pp.239-248
• /
• 2002

Purpose: The actual nursing processes have been performed by individual nurses' judgment without any supporting programs in Korea. It is not easy for novice nurses to make accurate diagnoses and provide proper nursing interventions to patients. Therefore, we propose a computerized program for nursing diagnosis and intervention linked to medical diagnosis. Method: For the program, we have linked standardized nursing diagnosis and intervention classifications with medical diagnosis. It is premised that the program is connected to order communication system(OCS) in hospitals. Result: We provide a nursing information system with standardized database for nursing diagnosis and interventions so that nurses can make more accurate diagnosis and perform more adequate interventions. Conclusion: It is expected that the program will help the nurses perform their nursing processes more efficiently. And we expect the system can be used in many hospitals efficiently in the future after pilot operations are completed in some hospitals.

• Korean Journal of Community Nutrition
• /
• v.2 no.2
• /
• pp.246-255
• /
• 1997

This study was designed to find out opinions about free congregate site meals that the program served to improve nutritional status of low socio-economic elderly. This study was conducted in Sungnam-shi. The purpose of this study provided the baseline data to extend the meal service program in this area. Five hundred samples were selcted by the propotion of population in three districts(Sujung-gu, Jungwon-gu, Bundang-gu). The result were as follows. 72.8$\%$of subjects were women and 27.2$\%$of subjects were extended family type. Seventy$\%$ of respondant were not aware of the free meal service for elderly. Major channels of information about free meal service were mass media(33.8$\%$)and advertisement material from city (24.3$\%$). The rate of recognition and channels of information about free meal service were different according to demographic characteristics of subjects. Sixty-eight of subjects pointed that the meal service program was highly necessary in these areas and the necessity of the program was not significantly different by socio-economic variables. The group who know about free meal service had a positive attitude toward supporting the meal service program. Women preferred labor volunteers(46.8$\%$)at meal service center and men preferred donations. According to levels of education each group preferred different types of surpport for free congregate site meals for elderly. (Korean J Community Nutrition 2(2) : 246~255, 1997)