• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.68-75
• /
• 2001

In this paper, a number of supported metal oxides and perovskite type catalysts were investigated for the NOx reduction from the diesel engine exhaust gas. All catalysts were made into pellets type with diameter of 3-4 mm alumina(Al$_2$O$_3$) as a supporter. These samples were tested by real diesel exhaust gas which contains CO, hydrocarbons and soot in the temperature range of 150~55$0^{\circ}C$ with the $3300h^{-1}$ space velocity (SV). Among the results, several promising catalysts showed NOx conversion above 50% in the temperature range of 150-35$0^{\circ}C$. From these results supported metal oxides catalysts and perovskite type could be recommended for the practical application to the automobile exhaust treatments.

• 가정과삶의질연구
• /
• 제20권6호
• /
• pp.141-149
• /
• 2002

In order to promote well-being during old age, it is important to start preparing early on for the later life. Based on this thesis, this study examined attitudes of the middle-aged women residing in rural towns on their preparation for old age as well as related variables. For this purpose, survey data from 200 individuals were analyzed using a SAS program. The overall degree of preparation for old age was quantified as about 67 points out of a 100 possible points. The variables that affected the level of preparedness include attitude toward using a paid nursing home ($\beta$=.23), type of agricultural work they engage in ($\beta$=-.21), who do you think is a supporter during your old age($\beta$=.20)］, type of decision-making in the household ($\beta$=.17). The explanatory power of such variables as standards of living ($\beta$=.18), family type ($\beta$=-.18), recognition of the entrance of old age ($\beta$=.17), and preparation behavior for old age ($\beta$=.15) were partially proved in three sub-areas (economical, emotional, and leisure areas) of preparation. The groundwork of this study could be used as basic materials to develop an educational program to improve the attitudes toward preparation for old age.

• Journal of Information Display
• /
• 제4권1호
• /
• pp.29-33
• /
• 2003

We have investigated the effects of hole-injection buffer layer in organic light-emitting diodes using copper phthalocyanine (CuPc), poly(vinylcarbazole)(PVK), and Poly(3,4-ethylene dioxythiophene):poly(styrenesulfonate) (PEDOT: PSS) in a device structure of $ITO/bufferr/TPD/Alq_3/Al$. Polymer PVK and PEDOT:PSS buffer layer were produced using the spin casting method where as the CuPc layer was produced using thermal evaporation. Current-voltage characteristics, luminance-voltage characteristics and efficiency of device were measured at room temperature at various a thickness of the buffer layer. We observed an improvement in the external quantum efficiency by a factor of two, four, and two and half when the CuPc, PVK, and PEDOT:PSS buffer layer were used, respectively. The enhancement of the efficiency is assumed to be attributed to the improved balance of holes and elelctrons resulting from the use of hole-injection buffer layer. The CuPc and PEDOT:PSS layer function as a hole-injection supporter and the PVK layer as a hole-blocking one.

• 한국세라믹학회지
• /
• 제45권1호
• /
• pp.36-42
• /
• 2008

Carbon/$TiO_2$ composite photocatalysts were thermally synthesized with different mixing ratios of anatase to phenol resin through an ethanol solvent dissolving method. The XRD patterns revealed that only anatase phase can be identified for Carbon/$TiO_2$ composites. The diffraction peaks of carbon were not observed, however, due to the low carbon content on the $TiO_2$ surfaces and the low crystallinity of amorphous carbon. The results of chemical elemental analyses of the Carbon/$TiO_2$ composites showed that most of the spectra for these samples gave stronger peaks for carbon and Ti metal than that of any other elements. The BET surface area increases to the maximum value of $488\;m^2/g$ with the area depending on the amount of phenol resin. From the SEM images, small $TiO_2$ particles were homogeneously distributed to a composite cluster with the porosity of phenol resin-based carbon. From the photocatalytic results, the MB degradation should be attributed to the three kinds of synergetic effects, such as photocatalysis, adsorptivity, and electron transfer by light absorption between supporter $TiO_2$ and carbon.

• 한국세라믹학회지
• /
• 제45권4호
• /
• pp.196-203
• /
• 2008

Metal-carbon/$TiO_2$ composite photocatalysts were thermally synthesized through the mixing of anatase to metal(Cu, Zn) containing phenol resin in an ethanol solvent coagulation method. The BET surface area increases, with the increase depending on the amount of metal salt used. From SEM images, metal components and carbon derived from phenol resin that contains metal was homogeneously distributed to composite particles with porosity. XRD patterns revealed that metal and titanium dioxide phase can be identified for metal-carbon/$TiO_2$ composites, however, the diffraction peaks of carbon were not observed due to the low carbon content on the $TiO_2$ surfaces and due to the low crystallinity of the amorphous carbon. The results of a chemical elemental analysis of the metal-carbon/$TiO_2$ composites showed that most of the spectra for these samples gave stronger peaks for C, O, treated metal components and Ti metal compared to that of any other elements. According to photocatalytic results, the MB degradation can be attributed to the three types of synergetic effect: photocatalysis, adsorptivity and electron transfer, according to the light absorption between the supporter $TiO_2$, metal species, and carbon layers.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1739-1744
• /
• 2008

본 연구에서는 현재 국내에서 다량 사용하고 있는 중금속 크롬($Cr^{6+}$)과 납(Pb)이 포함된 녹색안료를 대체하기 위하여 유동층기상증착(FB-VD) 공정을 사용한 무독성 유 무기 복합안료를 개발하였다. 안교제조를 위하여 카올린(Kaolin) 계열의 화합물과 탄산칼슘($CaCO_3$)을 담체로 사용하였으며, 담체들의 표면특성과 구성성분은 SEM과 EDXS를 사용하여 고찰하였다. 또한 안료의 성능을 극대화하기 위하여 다양한 종류의 계면활성제를 사용하고, 그 성능 차이를 고찰하였다. 녹색안료의 색상발현 실험을 한 결과 건조상태나 색상발현에서 녹색물실 배합농도에 차이를 보였으나, 음이온 계면활성제를 사용한 경우 건조와 색상발현에 가장 적합하였다.

• 정보처리학회논문지D
• /
• 제16D권3호
• /
• pp.361-370
• /
• 2009

많은 모바일 어플리케이션 개발자들은 매우 엄격한 제약사항 즉 짧은 개발기간, 사용자의 다양한 요구사항 및 잦은 요구 변경에 직면하고 있다. 이러한 개발환경은 사용자가 사용하기 편리한 GUI의 개발과 S/W 개발초기부터 철저한 테스트를 하여 품질을 보증하는 테스트 방법이 필수적이다. 따라서 본 논문은 모바일 응용 S/W GUI를 기존의 매뉴얼을 보고 테스트 하는 단계적이고 수동적인 방법을 탈피하여 사용자 중심의 시나리오를 통하여 자동으로 GUI를 테스트 하는 것을 목적으로 한다. 제시한 테스트 방법은 사용자 중심의 UI를 설계하여 간편하고, 정확하게 테스트 할 뿐만 아니라 테스트케이스를 재사용하는 환경을 지원한다. 제안한 자동화 도구는 시나리오 기반의 정확한 테스트와 재사용성을 높인 테스트 도구로서 기존 테스트 도구와 기능적인 비교를 통하여 성능을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제16권5호
• /
• pp.385-389
• /
• 2003

There are four main components of the CMP process: polishing pad, slurry, elastic supporter, and pad conditioner. The polishing pad is an essential component to the reproducibility of polishing uniformity in CMP process. However, the polishing pad in recently using metal CMP raised the several points of high cost caused by the increase of cycle time and the many usage of slurry. It is necessary to develop the novel polishing pad which would lead the cost reduction by the higher pad life-cycle, minimized cycle time and lower slurry usage. The characteristics of polishing pad were studied on the effects of different sets of the Polishing pad, which can be applied to metal chemical mechanical polishing process for global planarization of multilevel interconnection structure. The main purpose of this experiment is cost reduction by the increase of pad life-time, the decrease of cycle time and the lower usage of slurry through the specific hard porous structured pad design. It is confirmed that the novel polishing pad made the slurry usage decrease to 60% as well as the pad life-time increase twice with the 25% improvement of removal rate. The polishing time could be decreased and it also helped the cycle time to diminish. It can be expected that this results will help both the process throughput and the device yield to be improved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2046-2048
• /
• 2005

This paper deals with ground potential rise of structure grounding electrode when a test current flows through grounding electrode. In order to analyze the potential gradient of ground surface on structure grounding electrode, the reduced scale model has been used. The structures were designed through reducing real buildings and fabricated with four types on a scale of one-one hundred sixty. The supporter was made to put up with weight of structure and could move into vertical, horizontal, rotary direction. When a test current flowed through structure grounding electrodes, ground potential rise was the lowest value at electric cage type(type B). According to resistivity and absorption percentage in concrete attached to structure, the potential distribution of ground surface appeared differently.

• 한국정밀공학회지
• /
• 제23권8호
• /
• pp.154-162
• /
• 2006

By laying its drum horizontally, front-loaded washing machine mostly used in Europe that uses the head of the water to launder was appropriate for washing only small amount of laundry. However, the demands of customers are requiring front-loaded washing machine to handle big capacity laundry as well, and have faster rotation speed to increase drying ability. To meet such demands, more stress from bending and twisting are complexly loaded onto the shaft supporting the horizontal drum, causing problems in fracture strength and fatigue life. Shafting system is mainly divided into flange and shaft. Flange is located between the drum and shaft, transferring power from the shaft to drum, and acting as a supporter of the back of the drum. Shaft is connected from the flange to insert production, transferring power from the motor to drum, and mainly acting as stiffness against the horizontal weight of the shafting system. In this paper, strength analysis and experiment were executed on both the shaft and flange of front-loaded washing machine to suggest the design improvement of shafting system for big capacity, high-rotation drying. Also, verification of this evaluation was executed on fracture strength and fatigue life for studied shaft system.