• 제목/요약/키워드: supply-type test

검색결과 269건 처리시간 0.031초

저소음·분진회수형 도로절단기의 친환경성 평가 (Eco-friendliness Evaluation of a Low-Noise and Dust-Recovery Type Pavement Cutter)

  • 김균태
    • Ecology and Resilient Infrastructure
    • /
    • 제8권4호
    • /
    • pp.194-203
    • /
    • 2021
  • 최근에 상하수관로, 지역난방 열공급관로 등의 유지보수가 증가하면서, 도로절단기에 의한 도로절단 작업도 급증하고 있다. 이러한 도로절단 작업은 소음과 함께 분진(절단슬러지)을 많이 발생시키므로, 저소음, 분진회수 등 친환경적인 기술이 적용될 필요가 있다. 기존에 이러한 문제점을 해결하고자 분진을 회수하는 장비가 개발된 사례가 있으나, 친환경성이 정량화되지 않았다는 한계가 있었다. 이에 본 연구에서는 소음 및 분진과 같은 환경위해요인의 발생원인을 근본적으로 제거할 수 있는 저소음·분진회수형 도로절단기를 개발하고, 이 절단기로 수행하는 도로절단작업 과정에 대한 친환경성을 평가하였다. 이를 위하여 본 연구에서는 진공장치와 슬러지흡입부로 구성된 수냉-슬러지회수 통합시스템을 개발하고, 개발된 시스템을 도로절단기에 적용하였다. 그리고 개발된 장비를 테스트 베드에 적용하고, 친환경성 관련 데이터를 수집하여, 친환경성을 평가하였다. 평가 결과, 개발된 장비의 절단슬러지 회수율은 83% 이상이었으며, 소음도는 82~83 dB, 음향파워레벨은 115 dB 수준이었다. 본 연구의 결과는 향후 도로절단기를 개선하는 과정에서 절단슬러지 회수성능과 저소음 성능을 향상시키는 데에 기초자료로 활용될 예정이다.

Experimental Results of New Ion Source for Performance Test

  • 김태성;정승호;장두희;이광원;인상열
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.269-269
    • /
    • 2012
  • A new ion source has been designed, fabricated, and installed at the NBTS (Neutral Beam Test Stand) at the KAERI (Korea Atomic Energy Research Institute) site. The goalis to provide a 100 keV, 2MW deuterium neutral beam injection as an auxiliary heating of KSTAR (Korea Super Tokamak Advanced Research). To cope with power demand, an ion current of 50 A is required considering the beam power loss and neutralization efficiency. The new ion source consists of a magnetic cusp bucket plasma generator and a set of tetrode accelerators with circular copper apertures. The plasma generator for the new ion source has the same design concept as the modified JAEA multi-cusp plasma generator for the KSTAR prototype ion source. The dimensions of the plasma generator are a cross section of $59{\times}25cm^2$ with a 32.5 cm depth. The anode has azimuthal arrays of Nd-Fe permanent magnets (3.4 kG at surface) in the bucket and an electron dump, which makes 9 cusp lines including the electron dump. The discharge properties were investigated preliminarily to enhance the efficiency of the beam extraction. The discharge of the new ion source was mainly controlled by a constant power mode of operation. The discharge of the plasma generator was initiated by the support of primary electrons emitted from the cathode, consisting of 12 tungsten filaments with a hair-pin type (diameter = 2.0 mm). The arc discharge of the new ion source was achieved easily up to an arc power of 80 kW (80 V/1000 A) with hydrogen gas. The 80 kW capacity seems sufficient for the arc power supply to attain the goal of arc efficiency (beam extracted current/discharge input power = 0.8 A/kW). The accelerator of the new ion source consists of four grids: plasma grid (G1), gradient grid (G2), suppressor grid (G3), and ground grid (G4). Each grid has 280 EA circular apertures. The performance tests of the new ion source accelerator were also finished including accelerator conditioning. A hydrogen ion beam was successfully extracted up to 100 keV /60 A. The optimum perveance is defined where the beam divergence is at a minimum was also investigated experimentally. The optimum hydrogen beam perveance is over $2.3{\mu}P$ at 60 keV, and the beam divergence angle is below $1.0^{\circ}$. Thus, the new ion source is expected to be capable of extracting more than a 5 MW deuterium ion beam power at 100 keV. This ion source can deliver ~2 MW of neutral beam power to KSTAR tokamak plasma for the 2012 campaign.

  • PDF

순환굵은골재 60% 이상 사용한 고강도 콘크리트에 대한 강섬유 보강 효과 (The Effects of Steel-Fiber Reinforcement on High Strength Concrete Replaced with Recycled Coarse Aggregates More Than 60%)

  • 김윤일
    • 한국건설순환자원학회논문집
    • /
    • 제4권4호
    • /
    • pp.404-417
    • /
    • 2016
  • 이 연구는 지속가능한 자원순환형 골재공급 시스템 구축에 유용한 자료 제공을 목적으로 하며, 순환굵은골재를 60% 이상 100%까지 다량 사용한 고강도 콘크리트에서 이로 인하여 나타나는 압축강도와 전단강도 저하가 강섬유 보강으로 어느 정도 회복되고 개선되는지를 재료시험과 보의 전단파괴 실험을 통하여 밝히고자 하는 것이다. 이 연구에서는 먼저 관련된 기존 실험연구 결과들을 고찰하였다. 재료시험 결과, 체적대비 0.75%의 강섬유 보강과 흡수율 2.0% 이내의 고품질 순환굵은골재를 병용하였을 때, 압축강도 60MPa 수준의 고강도콘크리트의 압축강도 특성이 천연골재 수준으로 회복되고 좋은 연성 특성이 나타나는 것을 확인하였다. 또한 전단력이 보 거동을 지배하는 전단스팬비(a/d) 2와 4인 보에 대한 전단파괴 실험에서 강섬유 보강에 의한 매우 큰 전단강도 증진 효과와 연성거동 특성을 확인하였다.

병원 간호사의 장기근무유인과 직무만족과의 관계 (The Relationship Between Job Retainment and Job Satisfacion of Hospital Nurses.)

  • 이혜원
    • 대한간호
    • /
    • 제33권1호
    • /
    • pp.65-79
    • /
    • 1994
  • The purpose of this study was to describe the job retainment factors and the level of job satisfaction, and to identify the relationship between job retainment and the level of job satisfaction among the registered nurses working in hospitals. Four hundred eight registered nurses currently employed at 8 hospitals in Seoul were surveyed for the study. The 39 item, 5 point likert scale questionnare was developed by the researcher. The internal consistency of job satisfaction was. 86 and that of job retainment was. 90 in Cronbach's alpha test. The data sas collected from July 15 to July 30, 1993. The SPSS/PC+statistical program was used for data analysis. The descriptive analysis of the characteristics of the subjects, the level of job satisfaction and the job retainment factors was done. The relationship between the job satisfaction level and the job retainment factors was tested with. the Pearson Correlation Coefficient analysis, and thd differences of job retainment scores among the sample was tested with t-test and ANDVA. The results of the study were summarized. 1. The mean age of the subjects was 29.7 years, 41.7% of them were married. 71.1% of them were 3 years course graduates, 71.8% of them were staff nurses, and the mean duration of experience was 6 years. 2. The factors related to professionalism(3.43), society(3.31), and interpersonal relationship(3.29) were significant in job retainment. The maximum score was 5.0 Two other factors, personal(3.05) and organization(2.83) factors, also showed relatively high scores. 3. The factors to the job satisfaction showed similar pattern as job retainment: professionalism (3.47), society (3.33), finance(3.31), interpersonal relationship(3.02), and organization(2.72). 4. Society related factors(r=.7420, p<.00l) and professionalism(r=.7249, p<.00l) had high correlation with job retainment. Personal(r=.6372, p<.001) and organizational(r=.3597, p<.001) factors had moderate relationship to job retainment. Finance(r=.3597, p<.00l) had significant but weak relationship to job retainment. 5. Age, marital status, job position, departmental involvement, experience, and continuity of employment of the sample showed significant differences in job retainment. However, the period of job retainment, number of children, educational level, type of hospital, previous employment experience were not significant. 6. lndiviuals older than 40 years of age, who were married, who held the position of charge or head nurse position, who worked in central supply or nursing administration showed significantly high job retainment score. This research indicates that the professionalism is the most significant factor in job retainment. In order to retain more experienced nurses, it is important to improve the profesionalism among nurses.

  • PDF

웅성불임 인자를 이용한 갓(Brassica juncea L. Czern)의 F1 육종 (Breeding of F1 Hybrid for Oriental Mustard(Brassica juncea L. Czern) Using the Cytoplasmic Male Sterile Line)

  • 박용주;민병환
    • 농업생명과학연구
    • /
    • 제52권6호
    • /
    • pp.27-36
    • /
    • 2018
  • 김치가 세계 5대 건강식품으로 선정되어 세계인의 주목을 받게 되면서 갓의 수요도 점점 증가하고 있어 다양한 갓품종의 육성이 절실히 요구되는 실정이다. 그러나 아직 품종보급 체계가 미흡하여 자가 채종에 의한 자식약세현상, 순도저하, 상품의 불균일 등의 문제점이 발생하고 있다. 본 실험에서는 갓의 F1 품종 육성체제를 갖추기 위하여 유전자원으로 수집한 갓의 순계분리와 자식계통의 육성, 웅성불임인자의 도입을 통하여 고품질의 갓을 육성하기 위하여 각 조합을 공시하여 조합능력을 검정하고(인도자사이${\times}$고흥담양)조합과 (분리 MS 유기계-MS910${\times}$일본 적자색갓 8${\times}$강화갓 9) 분리계 조합이 우수하다고 판단되어 양친으로 선발하였다. PCR(Polymerase Chain Reaction)과 염기서열 분석을 통해 CMS type을 확인해 본 결과, MS계통 MSLS와 MSLC는 갓에서 보고된 orf263, orf220 및 orf288 CMS 유전자를 미토콘드리아 DNA에 포함하고 있는 것으로 나타났다. 최종적으로 생산력검정 및 농가 실증시험을 실시하였다.

계통 연계 PV-ESS 확장성 확보를 위한 병렬 DC-모듈형 PCS 설계 (The bidirectional DC module type PCS design for the System Inter Connection PV-ESS of Secure to Expandability)

  • 황락훈;나승권;최병상
    • 한국정보전자통신기술학회논문지
    • /
    • 제14권1호
    • /
    • pp.56-69
    • /
    • 2021
  • 상용계통과 연계한 PV 시스템은 인버터의 특성과 더불어 소형, 고 역률, 낮은 고조파 출력, 고 신뢰성, 최대출력 운전, 저비용 등의 장점이 요구된다. 태양광발전시스템의 PV 에너지를 계통과 부하로 전달하기 위해 양방향의 PCS가 요구되어 진다. 본 논문에서는 태양광 발전의 ESS를 고려한 PCS를 제안하여 부하평준화를 통한 전력의 안정적인 공급을 확인하고자 한다. 이를 위해 일사량과 부하량에 따른 5단계의 동작 모드 알고리즘을 제안하고, 충/방전 제어를 위한 제어기를 설계 하였다. 양방향의 효율적인 에너지 전달을 위해 DC-link단에 양방향 컨버터 및 배터리를 연결하고, 연계형 인버터를 통해 DC-link 전압 및 인버터 출력전압을 제어하였다. 제안된 시스템의 타당성을 입증하기 위해 PSIM을 사용한 시뮬레이션을 수행하여 타당성과 안정성을 검토하였으며, 이를 확인하기 위해 3[kW] PCS를 제작하여 실험하였다. 실험결과를 통해 제안된 시스템에 요구되어지는 특성을 검증하였으며 기존 시스템에 비해 강인한 시스템을 구성하였다.

포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구 (A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties)

  • 김옥준;이하영;김서운;김수진
    • 자원환경지질
    • /
    • 제4권4호
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

Er:YAG 레이저로 삭제된 상아질에 대한 컴포지트 레진의 미세인장결합강도에 관한 연구 (Micro-tensile Bond Strength of Composite Resin Bonded to Er:YAG Laser-prepared Dentin)

  • 민숙진;안용우;고명연;박준상
    • Journal of Oral Medicine and Pain
    • /
    • 제31권3호
    • /
    • pp.211-221
    • /
    • 2006
  • 목적 전통적 고속 회전식 절삭기구 또는 Er:YAG 레이저로 삭제된 상아질에, 두가지 다른 접착 시스템을 적용한 후, 축조한 컴포지트 레진의 미세인장결합강도를 비교하고, 다양한 Er:YAG 레이저 에너지가 미세인장결합강도에 미치는 영향을 평가한다. 재료 및 방법 40개의 제3대구치를 사용하여, 평평한 상아질면을 만든 후 8개의 군으로 나누어, 4가지 절삭방법 (고속 회전식 절삭기구, 2 W, 3 W, 4 W 출력의 Er:YAG 레이저) 중 한 가지로 삭제하고, 2가지 접착 시스템 (Scotchbond Multipurpose Plus, Clearfil SE bond) 중 한 가지로 처리하여 컴포지트 레진을 축조하였다. 24시간의 저장 후, 각 시편을 결합면에 수직으로 자르고, 미세인장결합강도를 측정하였다. 각 군의 미세인장결합강도는 평균$\pm$표준 편차로 표현하였고, 통계분석을 위해 two-way ANOVA, one-way ANOVA, student-Newman-Keuls' multiple comparison test, 그리고 t-test가 사용되었다. 결과 및 결론 1. 접착시스템과 관계없이, 절삭방법에 따른 미세인장결합강도의 유의한 차이가 있었고, 높은 순서대로 나열하면 다음과 같다: 3 W, 2 W, Bur, 4 W (p<0.001). 2. 절삭방법과 관계없이, Scotchbond Multipurpose Plus로 처리한 군이 Clearfil SE bond로 처리한 군보다 유의하게 높은 미세인장결합강도를 나타냈다 (p<0.001). 3. Scotchbond Multipurpose Plus로 처리한 군 중에서, 3 W 레이저 절삭군이 가장 높은 미세인장결합강도를 나타냈고, 다음이 Bur, 2 W, 4 W 절삭군 순이었다 (p<0.001). 4. Clearfil SE bond로 처리한 군 중에서 3 W 레이저 절삭군이 가장 높은 미세인장결합강도를 나타냈고, 다음이 2 W, 4 W, Bur 절삭군 순이었다 (p<0.001). 5. 두 가지 접착 시스템 모두에서, 레이저로 절삭한 군의 미세인장결합강도의 차이가 있었고, 높은 순서대로 나열하면 3 W, 2 W, 4 W 순이었다 (p<0.001). :상아질에 접착된 컴포지트 레진의 미세인장결합강도는 절삭방법과 접착시스템의 상호작용에 의해 유의한 영향을 받았다. 임상에서 레진 수복시, 2 W-3 W 범위내로 Er:YAG laser를 사용한다면 전통적 핸드피스 못지않게 수복물의 우수한 결합강도를 얻을 수 있다. 특히 시술시간의 단축, 과도한 산부식에 따른 부작용의 예방을 위해 Clearfil SE bond를 포함한 self etching system을 사용하고자 한다면 bur보다 Er:YAG laser를 이용한 삭제방법이 더 유용한 결합력을 제공할 것이다.

한옥주거단지 사업모델구상 및 타당성 분석 (The Business Model & Feasibility Analysis of the Han-Ok Residential Housing Block)

  • 최상희;송기욱;박신원
    • 토지주택연구
    • /
    • 제2권4호
    • /
    • pp.453-461
    • /
    • 2011
  • 주택에 대한 수요가 다변화되면서 최근 한옥주택 및 한옥주거단지에 대한 사회적 관심이 증대되고 있다. 기존에 한옥이 밀집한 지역을 중심으로한 정비사업 뿐만 아니라, 대규모 택지개발지구등에서도 한옥주택과 주거단지 개발에 대한 시도가 이루어지고 있지만, 본격적인 사업화는 이루어지지 않고 있다. 본 연구는 LH가 공급하는 신도시의 단독주택용지와 특성화용지등을 대상으로 하여 한옥의 잠재적 수요계층을 바탕으로 사업모델을 도출하고 사업모델에 대한 타당성을 검증하여 향후 사업화를 위한 방향을 제안하고자 한다. 기존에 검토되었던 고급형 타운하우스 형태의 한옥주거단지는 입지선정, 수요불일치 등으로 인하여 사업성이 부족한 것으로 분석되었으며, 설문조사 결과등을 바탕으로 계획규모변경, 용도혼합, 필지세분화등의 방법을 통해 사업유형을 6가지로 설정하였다. 사업모델 중에서 가장 사업성이 높은 유형은 블록형 집합주택으로, 이는 규모의 경제법칙(Ecnomy of Scale)에 따른 건축연면적의 증가가 분양수입의 증대로 이어진 것으로 이해할 수 있다. 소규모 한옥과 근생시설이 결합한 공동주택 모델의 타당성도 높게 나타났으며, 블록형 집합주택과 같은 동일한 사업조건을 적용한다면, 한스타일 공동주택의 사업성이 높은 것으로 분석되었다. 그 밖에 블록형 단독주택지내 고급주택 모델은 민간부문이 일반적으로 추진하고 있는 대표적인 사업유형으로서, 1호당 건설비용이 9.1억원으로 가장 많은 비용이 투입되는 것으로 나타났다. 한옥주거단지 사업성 제고를 위해서는 입지선정, 수요계층의 다양화, 주택규모의 적정화, 용도혼합등을 통한 집합화가 필요할 것으로 판단된다. 또한 단독주택용지에 한옥주택을 도입하기 위해서는 기존의 필지계획의 조정과 분할이 필요하며, 한옥형 용지등의 공급을 통해 새로운 수요에 대응하는 전략도 제안될 수 있다. 또한 기존의 획일적인 택지개발방식에서 벗어나 기초인프라(간선도로 및 상하수도)외에 조성되지 않은 자연상태의 토지인 원형지(原形地) 공급을 통한 개발방식도 검토할 수 있으며, 한옥의 지붕 및 가구구조상 1~2층 이상의 건축이 불가능하므로 경사지 형태를 갖는 원형지 공급방식의 단지조성이 토지비절감, 경관효과 등을 감안할 때 적합한 모델로 제안될 수 있다.

사회서비스 공급유형별 성과평가 비교 : 노인관련 사회서비스를 중심으로 (The Comparative Study on Performance Evaluations of Social Service Delivery Types)

  • 서정민;김낭희
    • 디지털융복합연구
    • /
    • 제14권5호
    • /
    • pp.39-46
    • /
    • 2016
  • 사회서비스 분야는 이용자의 욕구 확대에 따라 사회서비스 공급체계 또한 급속한 변화를 보이고 있다. 전통적인 사회복지에서 서비스는 공공과 민간에 의해 제공된다면, 사회서비스는 영리와 비영리라는 새로운 구조가 혼합된다. 하지만, 이와 관련된 기초연구는 충분하지만 공급유형별 성과관련 연구는 매우 미약하다. 이러한 점을 고려하여, 사회서비스의 영리 조직과 비영리 조직의 성과평가에 대한 비교를 시도하였다. 관련 자료는 보건사회연구원의 사회서비스 수요 공급실태조사에 활용된 데이터를 사용하였으며, 대상은 가사간병서비스와 노인돌봄서비스로 한정을 하였다. 성과평가를 위한 방식은 재무관점의 가장 초보단계인 총수익에서 총지출을 제외한 순수익을 활용하였으며, 영리와 비영리조직에 대한 차이를 검증하였다. 사회서비스 조직의 지출의 연구결과를 보면, 영리조직은 인건비, 운영비, 시설비, 소모품비 등에서 비영리조직보다 지출 비용이 높게 나타났으며, 다만 사업비 부분과 기타 부분은 비영리 조직이 영리조직보다 높게 제시되었다. 이와 같은 점을 고려하면, 향후 전달체계의 변화와 함께 영리와 비영리의 공정한 경쟁을 위하여 영리조직을 위한 추가적인 지원방안이 필요함을 확인할 수 있었다.