• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1460-1464
• /
• 2003

This paper describes the design and implementation techniques of a generic Internet based telerobotic system. The purpose is to make precious technical information and hands-on experience of the authors widely available for the research community. The paper is based on the telerobotics system that the authors recently implemented between KAIST and Saga University, Japan. In its current functionality, two control modes can be exercised; high-level supervisory control, and low-level supervisory control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.208-208
• /
• 2000

In realistic control systems, the nonlinear salutation attributes of the control actuator due to physical limitations should be taken into account. This nonlinear saturation of actuators may cause not only deterioration of the control performance but also a large overshoot during start-up and shut-down. As the overshoot increases, the system may become oscillatory unstable. In this paper, the supervisor implementation which guarantees good performance lot saturation operation and prevents reset wind-up is presented. Moreover, the sufficient conditions of the stability for saturated systems using supervisory control with a dynamic controller are provided in the discrete-time domain. A numerical example is illustrated to depict the efficiency of supervisory control for a typical saturated production-distribution system controlled by a discrete-time dynamic controller and to validate basic results by simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.35-38
• /
• 1995

We proposed in this paper a systematic way for analyzing discrete event dynamic systems to classify faults and failures quantitatively and to find tolerable fault event sequences embedded in the system. An automated failure diagnosis scheme with respect to the nominal normal operating event sequences and the supervisory control problem for tolerable fault event sequences is presented. Moreover the supervisor failure diagnosis problem with respect to the tolerable fault event sequences is considered. Finally, a plasma etching system example is presented.

• 조명전기설비학회논문지
• /
• 제13권1호
• /
• pp.69-76
• /
• 1999

본 논문에서는 도로 교통 정보설비의 유지관리를 위해 지능형으로 수행하는 원격감시제어 시스템을 제안하였다. 제안된 시스템은 국도 3호선에 설치되는 도로교통 설비에 대하여 유지관리를 수행하도록 시스템적으로 구축되어 있으며, 전송된 고장 정보는 중앙감시센터의 고장 정보 분석 알고리즘에 의해서 정보의 특성을 파악하도록 하였다. 분석 알고리즘은 신경회로망을 이용하여 다중으로 발생하는 고장정보에 대해서 지식 기반의 고장현상을 추론하도록 제안하였다. 고장 정보 분석 알고리즘의 유용성을 확인하기 위해 현장으로 실시간으로 전송되는 바이너리 신호의 패턴을 5가지 형태로 분류하여 성능을 분석하였으며, 이를 중앙감시센터에서의 유지관리용 운영환경 하에서 구현되도록 하였다.

• International Journal of Control, Automation, and Systems
• /
• 제2권2호
• /
• pp.220-227
• /
• 2004

This paper describes the design and implementation techniques of a generic Internet-based telerobotic system. The purpose is to make available the precious technical information and hands-on experience of the authors for the research community. The paper is based on the telerobotics system that the authors recently implemented between KAIST, Korea and Saga University, Japan. In its current functionality, two control modes: high-level supervisory control and low-level supervisory control are explored demonstrating their merits and demerits.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.864-867
• /
• 1995

Presented in the paper is a structured approach to modeling automated manufacturing system (AMS) in the form of an event graph. The proposed two-phase procedure for formal modeling is 1) reference modeling by schematic supervisory control modeling and 2) event graph transformation from supervisory control model. Also described is a formal model for a small-sized FMS in the form of an event graph.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.244-246
• /
• 1998

Robust control for DC motor is needed according to the highest precision of industrial automation. However when a motor control system with PID controller has an effect of load disturbance, it is very difficult to guarantee the robustness of control system. As a compensation method solving this problem, in this paper, PID-supervision hybrid control method for motor control system is presented. If the PID control system (without the supervisory controller) is stable in the sense that the error is inside the constraint set, the supervisory control is idle. If the error hits the boundary of the constraint, the supervisory controller begins operation to force the error back to the constraint set. We prove that the PID-supervision hybrid control system is globally stable in the sense that the error is guaranteed to be within the tolerance limits specified by the system designer.

• International Journal of Computer Science & Network Security
• /
• 제22권3호
• /
• pp.355-363
• /
• 2022

This paper presents the modeling for islanded hybrid AC/DC microgrid and the verification of the proposed supervisory controller for energy management for this microgrid. The supervisory controller allows the microgrid system to operate in different power flows through the proposed control algorithm, it has several roles in the management of the energy flow between the different components of the microgrid for reliable operation. The proposed microgrid has both essential objectives such as the maximum use of renewable energies resources and the reduction of multiple conversion processes in an individual AC or DC microgrids. The microgrid system considered for this study has a solar photovoltaic (PV), a wind turbine (WT), a battery (BT), and a AC/DC loads. A small islanded hybrid AC/DC microgrid has been modeled and simulated using the MATLAB-Simulink. The simulation results show that the system can maintain stable operation under the proposed supervisory controller when the microgrid is switched from one operating mode of energy flow to another.

• 한국지진공학회논문집
• /
• 제9권4호
• /
• pp.55-66
• /
• 2005

본 논문에서는 스마트 면진장치를 효과적으로 제어하기 위하여 퍼지관리제어기를 개발하였고 그 효율성을 검토하였다. 이를 위하여 1세대 스마트 면진 벤치마크 건물을 이용하여 수치해석을 수행하였다. 대상 벤치마크 구조물은 부정형의 평면을 가지고 있는 8층 건물이고 탄성베어링과 MR 감쇠기로 이루어진 스마트 면진장치가 설치되어 있다. 본 논문에서는 다목적 유전자 알고리즘을 이용하여 원거리 지진과 근거리 지진에 대하여 각각 면진구조물을 효과적으로 제어할 수 있는 하위 퍼지제어기를 개발한다. 최적화과정에서는 구조물의 최대 및 RMS 가속도와 면진층 변위의 저감이 목적으로 사용된다. 벤지마크 건물에 지진하중이 가해지면 두 개의 하위 퍼지제어기에서는 각각 다른 명령전압이 제공되는데 이 명령전압들은 퍼지관리제어기의 추론과정에 기반하여 실시간으로 참여율이 조절되어 하나의 명령전압으로 조합된다. 수치해석을 통하여 제안된 퍼지관리제어기법을 사용함으로써 상부구조물의 응답과 면진층의 변위를 효과적으로 줄일 수 있음을 확인할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.184-184
• /
• 2000

The new-type measuring modules for unmanned remote supervisory system using mobile communication network have been designed in this study. Measuring modules consist of temperature measuring module, humidity measuring module and human body sensing module. And we will design a main part to collect and process informations of each modules, evaluate reliability of combined total system.