• The Journal of the Korea Contents Association
• /
• v.17 no.7
• /
• pp.610-621
• /
• 2017

Medical cost for elderly is increasing with ageing society and putting more and more burden on both individuals and government. To find a solution to reduce medical cost among elderly and to propose implication/suggestion to central government and a local government, different degree of medical cost burden by type of household and factors that affect increased medical cost are investigated based on elderly in Suwon city in this article. According to the research result, 59.3% of respondents felt medical cost burdensome. Also, according to the multiple regression performed to understand factors that increases medical cost by type of household, subjectively felt health status was found to be a statistically significant factor commonly in three groups which are living household with adult child, living household with spouse only, living household alone. And the degree of medical cost was higher in living household with spouse only, more higher in living household alone. And socioeconomic status and health status, health status, and health status and private insurance, medical security system were found to be significantly related to medical cost burden to household type of the elderly.

• The Journal of Korean Association of Computer Education
• /
• v.22 no.6
• /
• pp.43-55
• /
• 2019

In the Fourth Industrial Revolution, a super-intelligent and super-connected society has arrived. Software is an important part of the core technologies of the Fourth Industrial Revolution. The ability to solve problems through software requires software education in that it is a core competency that everyone should have. Software education aims to improve Computational Thinking, which is the ability to solve problems through programming. Until now, most problem-solving programming learning models follow the traditional method of development: Waterfall model (Analysis-Design-Development-Test). In this model, if there is a problem in the preceding step, That could be found in the test phase. This takes a considerable amount of time and effort to find a solution to the problem and can be a burden on the programming learning. In this study, we proposed a Test-Driven Problem-Solving learning model using TDD (Test Driven Development) as Agile development method, and reviewed the appropriateness of the model through experts review. The verification results of the model showed positive evaluation results. In particular, the learning phase configuration of the model, helping in programming learning, helping of Computational Thinking improvement showed high rating, it is determined that there will be positive effects on Computational Thinking improvement through problem-solving programming learning when applying future learning.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.9
• /
• pp.22-30
• /
• 2011

Recently, the rising demand for intelligent video surveillance system leads to high-performance face recognition systems. The solution for low-resolution images acquired by a long-distance camera is required to overcome the distance limits of the existing face recognition systems. For that reason, this paper proposes a hardware design of an image resolution enhancement algorithm for real-time intelligent video surveillance systems. The algorithm is synthesizing a high-resolution face image from an input low-resolution image, with the help of a large collection of other high-resolution face images, called training set. When we checked the performance of the algorithm at 32bit RISC micro-processor, the entire operation took about 25 sec, which is inappropriate for real-time target applications. Based on the result, we implemented the hardware module and verified it using Xilinx Virtex-4 and ARM9-based embedded processor(S3C2440A). The designed hardware can complete the whole operation within 33 msec, so it can deal with 30 frames per second. We expect that the proposed hardware could be one of the solutions not only for real-time processing at the embedded environment, but also for an easy integration with existing face recognition system.

• Journal of Distribution Science
• /
• v.10 no.11
• /
• pp.61-70
• /
• 2012

Purpose - The entry of Super Supermarkets (SSM), operated by large corporations, into the retail distribution market weakens the competitive power of local supermarkets (SM) and their families leading to a rapid collapse of the local-SM market. Accordingly, this is a very sensitive and urgent issue in Korean society and politics. Therefore, the government is required to take steps to activate a local-SM market and regain the loyalty of their customers. However, in spite of the urgent need of a comparative study on the advantages and competitive power of local-SM in relation to the SSM, little research has been done on this issue to date. One purpose of this study is to analyze the differences in store characteristics of the local SM and SSM, and to explore the relationships amongst various store characteristics, such as consumption emotion, relation quality, and store loyalty between store types to provide an efficient solution to activate a local-SM market. Research design, data, methodology - To analyze the differences in the evaluation of store characteristics between store types, and to test the moderator and mediator effects, data were collected from 488 customers in Seoul, Incheon,and Gyeonggi Province. The theoretical model consists of four hypotheses, and data was processed to test these using factor analysis, t-test, regression analysis, hierarchical regression, and the three step regression proposed by Baron and Kenny. Results - First, the analysis shows that local-SM customers evaluate location characteristic factors significantly higher compared to SSM customers. However, SSM customers evaluate quality of merchandise, sales promotion activities, and store environment significantly higher. Yet, there are no significant differences in the evaluation of consumption emotion, relation quality,and store loyalty between the store types. Second, the analysis of moderator effects of the store type show that sales promotion and store atmosphere factors have a significantly negative moderating effecton positive consumption emotion, while positive consumption emotion has a significantly positive moderating effect on absorption of relation quality, while there are no significant moderating effects between consumption emotion and store loyalty. Third, while both trust and absorption of relation quality are partially mediated between consumption emotion and store loyalty, only absorption is partially mediated between positive consumption emotion and store loyalty. There are no significant mediating effects of absorption between negative consumption emotion and store loyalty. Conclusions - We strongly recommend that location restrictions on entrance of SSM into local-SM market should either be further strengthened or sustained for the activation of the local store market. Government should strengthen financial support to improve the quality of merchandise, sales promotion, employee education, store environment of the local-SM by providing appropriate business consulting. Moreover, the result implies that the owners of alocal-SM should take measures to increase customers' absorption and store loyalty, such as store cleanliness, maintaining a delightful atmosphere at the store, and training employees on attitudes towards customers. As this study is restricted within Seoul, Incheon, and Gyeonggi Province, care needs to be taken in generalizing the interpretation and application to the national level.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.760-766
• /
• 2014

Bead type super-absorbent resins to be used for release-control were prepared by modification of the inverse suspension polymerization, and their physical properties were characterized. Acrylic acid and acrylamide were used as monomers, and N,N-methylenebisacrylamide was used as crosslinker, controlling the viscosity of monomer solution by adding hydroxyethylcellulose (HEC). SEM studies of the synthesized beads verified that the bead surfaces had many pores with their diameters of several tens nm. The bead sizes were in the range of $500{\sim}3000{\mu}m$, depending on the viscosity of the monomer solution. Both absorbent amount and absorbent rate of the beads were inversely proportional to the bead size, and the maximum water absorbent amount of 1 g beads was determined to be ca. 170~200 g for 5 hrs. The absorbent rate was also dependent on pH change of the aqueous solution, exhibiting the maximum rate in pH ranging from 5 to 11. The absorbent rate decreased as the concentration of salt (NaCl and $MgCl_2$) or ethanol and ethylene glycol increased. Release time of the water absorbed into the bead resins was 700 hrs, confirming the usefulness of the resin for the good release-control materials.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.449-454
• /
• 2016

In this study, highly monodispersed porous carbon microcapsules with a hollow core were synthesized using polystyrene (PS) beads as a hard template. The surface of PS was first modified with polyvinylpyrollidone (PVP) for the easy attachment of inorganic silica sol. After coating the surface of PVP modified PS microspheres with SBA-16 sol, the carbon microcapsules with a hollow macroporous core were fabricated through reverse replication method by filling carbon sources in the mesopores of silica mold. The hollow carbons having a mesoporous shell structure and narrow particle size distribution could be obtained after the carbonization of carbon source and the dissolution of silica mold by HF solution. The mesoporous characteristics and electrochemical properties of hollow carbon microcapsules were characterized by XRD, SEM, TEM, $N_2$ adsorption/desorption analysis and cyclic voltammetry. They showed the high electric conductivity and capability for use as efficient electro-materials such as a supercapacitor.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.39.1-39.1
• /
• 2009

NiTi alloy is widely used innumerous biomedical applications (orthodontics, cardiovascular, orthopaedics, etc.) for its distinctive thermomechanical and mechanical properties such as shape memory effect, super elasticity, low elastic modulus and high damping capacity. However, NiTi alloy is still a controversial biomaterial because of its high Ni content which can trigger the risk of allergy and adverse reactions when Ni ion releases into the human body. In order to improve the corrosion resistance of the TiNi alloy and suppress the release of Ni ions, many surface modification techniques have been employed in previous literature such as thermal oxidation, laser surface treatment, sol-gel method, anodic oxidation and electrochemical methods. In this paper, the NiTi was electrochemically etched in various electrolytes to modify surface. The microstructure, element distribution, phase composition and roughness of the surface were investigatedby scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry(EDS), X-ray diffractometry (XRD) and atomic force microscopy (AFM). Systematic controlling of nano and submicron surface features was achieved by altered density of hydro fluidic acid in etchant solution. Nanoscale surface topography, such as, pore density, pore width, pore height, surface roughness and surface tension were extensively analyzed as systematical variables.Importantly, bone forming cell, osteoblast adhesion was increased in high density of hydro fluidic treated surface structures, i.e., in greater nanoscale surface roughness and in high surface areas through increasing pore densities.All results delineate the importance of surface topography parameter (pores) inNiTi to increase the biocompatibility of NiTi in identical chemistry which is crucial factor for determining biomaterials.

• Korean Journal of Materials Research
• /
• v.20 no.4
• /
• pp.194-198
• /
• 2010

Cubic boron nitride (c-BN) is a promising material for use in many potential applications because of its outstanding physical properties such as high thermal stability, high abrasive wear resistance, and super hardness. Even though 316L austenitic stainless steel (STS) has poor wear resistance causing it to be toxic in the body due to wear and material chips, 316L STS has been used for implant biomaterials in orthopedics due to its good corrosion resistance and mechanical properties. Therefore, in the present study, c-BN films with a $B_4C$ layer were applied to a 316L STS specimen in order to improve its wear resistance. The deposition of the c-BN films was performed using an r.f. (13.56 MHz) magnetron sputtering system with a $B_4C$ target. The coating layers were characterized using XPS and SEM, and the mechanical properties were investigated using a nanoindenter. The friction coefficient of the c-BN coated 316L STS steel was obtained using a pin-on-disk according to the ASTM G163-99. The thickness of the obtained c-BN and $B_4C$ were about 220 nm and 630 nm, respectively. The high resolution XPS spectra analysis of B1s and N1s revealed that the c-BN film was mainly composed of $sp^3$ BN bonds. The hardness and elastic modulus of the c-BN measured by the nanoindenter were 46.8 GPa and 345.7 GPa, respectively. The friction coefficient of the c-BN coated 316L STS was decreased from 3.5 to 1.6. The wear property of the c-BN coated 316L STS was enhanced by a factor of two.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.131-134
• /
• 2008

The numbers of the elderly who suffer Empty Nest Syndrome have been accelerated as an aging population has increased vastly and nuclear families have been a dominating family type in modern Korean society. To make the elderly get out of this phenomenon and live actively, the scheme of converting their existing houses into shared houses was set as a hypothetical solution in this study, and finding out the responses of the elderly who owns their own houses is the purpose of the study. A small workshop panel method was used and the elderly aged 55 years upwards took part and they own a detached house that is relatively large for the elderly or the elderly couple to live alone. The workshop was consisted of 3 stages: 1. a survey 2. an interview 3. a site visit. Through this, problems that the elderly have been experiencing within their houses were looked into and the responses of the elderly on converting their houses to shared houses by introducing developed schematic plans. As a result, positive responses from the house owners were carried out based on the fact that subsidies from the government on house renovation and tenants matching programs are supported. Shared houses could provide home owners economical support with rents and help them to feel less lonely. This is one way of supporting the elderly to live and age actively in their later lives. Therefore, this idea should be established in connection with preparing aging, aged, and super-aged society.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.136-144
• /
• 1996

Polyacrylic super absorbent polymer(SAP) containing sorbitol was synthesized by inverse-suspension polymerization method. Sodium acrylate and acrylic acid were used as a monomer, ethylene glycol dimethacrylate(EGDMA) and glycerol polyglycidyl ether(GPGE) were used as a crosslinking agent, potassium persulfate(PPS) was used as an initiator, and cyclohexane was used as a solvent. Content of sorbitol was from 10mol% to 50mol% according to the mol ratio of acrylic acid monomer. The size distribution of the round shaped polymeric particle was $177{\sim}707{\mu}m$. Absorption amount of the polymer containing sorbitol was 785 to 1086 times of the polymer weight in distilled water, was 50 to 83 times in 0.9 % NaCl solution. Absorption and retention amount of the polymer were decreased with increasing the amount of sorbitol, but the polymer has an endothermic property which is +5 cal/g SAP.