• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.5
• /
• pp.286-291
• /
• 2001

This study was carried out to investigate the influence of ${\sigma}$ phase on the microstructure and mechanical properties in super duplex stainless steel. The precipitation of ${\sigma}$ phase during isothermal heat treatment showed the type S curves with a certain incubation period. The precipitation of ${\sigma}$ phase was precipitated at ferrite phase and interface of ferrite and austenite. Under the state of isothermal transformation, the precipitation of ${\sigma}$ phase was stimulated by applied stress. With increasing of volume fraction of precipitated ${\sigma}$ phase, tensile strength was increased and elongation was decreased with linear relationship, while in case of precipitated ${\sigma}$ phase was 5% over, impact value was rapidly decreased.

• Journal of Korea Multimedia Society
• /
• v.17 no.10
• /
• pp.1150-1159
• /
• 2014

This paper proposes a method for extracting tissue cells from an organism image by an electron microscope and getting the whole cell number and the area from the cell. In general, the difference between the cell color and the background is used to extract tissue cell. However, there may be a problem when overlapped cells are seen as a single cell. To solve the problem, we split them by using cell size and curvature. This method has a 99% accuracy rate. To measure the cell area, we compute two areas, the inside and boundary of the cell. The inside is simply calculated by the number of pixels. The cell boundary is obtained by applying super sampling, linear interpolation, and cubic spline interpolation. It improves the error rate, 18%, 19%, and 120% respectively, in comparison to the counting method that counts a pixel area as 1.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1667-1673
• /
• 2015

The vibration and noise caused by the dynamic interaction between electromagnetic suspension and the linear synchronous motor stator beneath a flexible guideway remain problems in designing attractive Maglev trains. One possible method to reduce the sources of vibration is to minimize the detent force in the linear synchronous motor that creates variations in both lift force and thrust. This paper proposes lowering detent force by using separated core instead of single united core. The magnet is designed to adapt to the deflected guideway at a speed of 550km/h. This study will analyze the electromagnetic field and control performance, and how they relate to lift forces and dynamic responses.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3079-3085
• /
• 2011

Through Korean Urban Maglev Program started in 2006, an urban maglev train was developed and the demonstration line is under construction as of now in 2011. The target speed of the developed maglev train is 110km/h, and the core technologies for super speed maglev trains over 500km/h are being studied. The propulsion and levitation systems of the super speed maglev train under consideration consist of linear synchronous motors (LSM) and levitation electromagnets which also act as a mover of LSM. In addition, guidance electromagnets are used to ensure stable running on curved tracks during super speed operation. The levitation and guidance control is focused on in this paper. For experimental purpose, a small maglev train is being manufactured, and its levitation and guidance controller is studied. The main task of the controller is to maintain the gap between the corresponding electromagnet and the guideway constantly. In general, measurements of the gap, acceleration and current and so on are utilized, and the gap control is implemented independently for each electromagnet. In this paper, the levitation and guidance system is modelled considering mechanical interactions, and the levitation and guidance controller is proposed based on this model. The developed controller is verified by various simulations using MATLAB/Simulink.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.111.1-111.1
• /
• 2015

As an alternative way to get sophisticated nanostructures, atomic force microscopy (AFM) has been used to directly manipulate building primitives. In particular, assembly of metallic nanoparticles(NPs) can provide various structures for making various metamolecules. As far, conventionally made polygonal shaped metallic NPs showed non-uniform distribution in size and shape which limit its study of fundamental properties and practical applications. In here, we optimized conditions for deterministic manipulation of ultra-smooth and super-spherical gold nanoparticles (AuNPs) by AFM. [1] Lowered adhesion force by using platinum-iridium coated AFM tips enabled us to push super-spherical AuNPs in linear motion to pre-programmed position. As a result, uniform and reliable electric/magnetic behaviors of assembled metamolecules were achieved which showed a good agreement with simulation data. Furthermore, visualization of near field for super-spherical AuNPs was also addressed using photosensitive azo-dye polymers. Since the photosensitive azo-dye polymers can directly record the intensity of electric field, optical near field can be mapped without complicated instrumental setup. [2] By controlling embedding depth of AuNPs, we studied electric field of AuNPs in different configuration.

• Journal of the Chungcheong Mathematical Society
• /
• v.7 no.1
• /
• pp.141-152
• /
• 1994

We consider a numerical scheme for solving a nonlinear boundary integral equation (BIE) obtained by reformulation the nonlinear boundary value problem (BVP). We give a simple alternative to the standard collocation method for the nonlinear BIE. This method consists of one conventional linear system and another coupled linear system resulting from an auxiliary BIE which is obtained by differentiating both side of the nonlinear interior integral equations. We obtain an analogue BIE through the perturbation of the fundamental solution of Laplace's equation. We procure the super-convergence of approximate solutions.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.1 s.10
• /
• pp.1-8
• /
• 2005

Linear motor can be directly applied to the system needed linear motions without rotary motions. To control high-speed and high-resolution, the development of the linear motors is recently required in the high-integrated and speed process industry This paper presents thermal and vibration analyses as well as measurement standards of the newly developed linear motors through analyzing the thermal behaviors and vibration characteristics of the advanced products. The thermal measurements are conducted for comparing the developed linear motor with the advanced linear motor and the Finite Volume Method(FVM) is used to identify the measurement results. And then the vibration measurement are carried out in the developed and advanced linear motors with respect to the speed. To identify the measurement results, the Finite Element Method is utilized in the developed and advanced linear motors, respectively. The FVM, FEM, and experiments make it possible to understand these characteristics. The improvement is suggested through their results conducted experiment and analyses.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2006.04a
• /
• pp.87-89
• /
• 2006

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.840-845
• /
• 2004

Development of the linear motors is recently required to control a high-speed and high-resolution in the high-integrated and speed process industry. This paper presents vibration analyses as well as measurement standards of the newly developed linear motors through analyzing the vibration characteristics of the advanced products. Vibration experiments are conducted for identifying vibration level during operation. They are also included in the modal test to analyze dynamic characteristics. Analytic data using Finite Element Method (FEM) are compared with the results of the modal. The FEM and experiments make it possible to understand these characteristics. Further, through computer simulation for the behavior of moving part to be vibration source, the best acceleration pattern of moving part movement can be verified to achieve effective moving part positioning and reduce the vibration due to moving part movement.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.75-77
• /
• 2015

디스플레이 해상도가 지속적으로 고해상화가 되면서, 기존 저해상도 영상을 고해상도 디스플레이 크기에 맞춰 해상도를 키우는 기법인 초해상화(super-resolution, SR) 기법에 많은 관심이 쏟아지고 있으며 이에 대한 많은 초해상화 논문들이 게재되었다. 이 중 현재 최상 품질의 고해상도 영상을 복원하는 한 초해상화 기법은, 입력 받은 저해상도 영상을 자가 예제(self-examples)로 사용하여 선형 매핑(linear mapping)을 통해 점진적으로 여러 레벨(level)를 거쳐 조금씩 키우는 방법이다. 이때 각 레벨마다 기존 저해상도 영상 크기로 반복적으로 줄여 오차를 줄이는 역투영법(back-projection)을 사용하는데, 이 방법은 처리된 영상에 시각적 품질을 낮추는 링 아티팩트(ringing artifacts)를 생산하며, 이는 매 레벨마다 계속 누적이 되어 고해상도 결과 이미지 품질에 악영향을 미치는 단점이 있다. 이를 보완하기 위해, 본 논문에서는 저해상도 정지 영상을 고해상도 정지 영상으로 점진적으로 키울 때 일반적인 역투영법 대신 비국소적 평균법(non-local means, NLM) 기반 역투영법을 사용하는 초해상화 기법을 제안한다. 제안하는 기법은 매 레벨마다 생기는 링 아티팩트를 효과적으로 제거하여 높은 시각적 품질의 고해상도 영상을 복원할 수 있게 한다. 실험을 통해 제안된 초해상화 기법을 사용 시 기존 초해상화 기법보다 향상된 고품질 고해상도 영상 복원이 가능한 것을 확인하였다.