• Restorative Dentistry and Endodontics
• /
• 제28권5호
• /
• pp.402-408
• /
• 2003

This study was done to present a criterion in selection of the most proper light sources and materials by measuring metamerism index(MI) of the light curing composite resins with spectrocolorimeter. Metamerism is defined when two objects appear to be the same color in one illuminant but different in another. This is due to the fact that they have different spectral curves that fail to match under the second illuminant. In this study, A1 & A3 shade of five light curing composite resins (Esthet-X, Filteck Z250, Filteck A110. Charisma. Vitalescence) were chosen based on Vita shade. Five samples were made for shade of each product with Teflon mold (diameter: 15mm, thickness: 2mm). Metamerism index of each samples on a Barium sulfate plate($L^{*}=96.54,{\;}a^{*}=0.19,{\;}b^{*}=0.01$) prepared for sample fixation were measured with spectrocolorimeter(Miniscan XE plus. Model 4000s. Hunter Lab. USA) by applying standard light source D^{65}, C. Fcw, TL84 and A. Standardization was done with reference standard(X=80.8, Y=85.7, Z=90.8) and light trap. The results were as follows. 1. Different resins with same Vita shade showed recognizable color difference (${\delta}E^{*}>2$). 2. All composites had MI below accepted value 0.5 between standard illuminant(D$_{65}$, C, & A) and below 1.5 under fluorescent condition (Fcw & TL84). 3. MI value between $D^{65}$ and A showed higher value than MI value between other source of light(p<0.01). 4. All resins except Z250 showed MI value that A3 is higher than A1 between $D^{65}$ and A(p<0.05).except Z250 showed MI value that A3 is higher than A1 between $D^{65}$ and A(p<0.05).

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.196-202
• /
• 2008

Effective climate protection is a most important tasks of our time. The BIPV is one of the most interesting and promisingly possibilities of an active use of solar energy at the building. In this study it was analyzed by the case study the function of the requirement of the BIPV-module as building material and this architectural characteristic according to the kind of the module. Therefore the goal of this study is to get securing the application information of BIPV as windowpane. BIPV modules are manufactured in the form of G/G. In the case of the crystal type the Transparent and the light Transmission is to be adjusted by the spacer attitude of the cell. Although this type could not be optimal for light effect of indoors because of the inequality of shade, the moving shade play makes a dramatic Roomimage by the run of sun. The application of this type would be for canopy, window or roof in the corridor or resounds. With amorphous the type it is to be manufactured simply largely laminar, and thus that will shorten building process. There is a relatively good economy to use and to the window system easily. After the production technology is easy the transparency of the modules to adjust, and the module shows to a high degree constant characteristics of light permeability and transparency. Without mottle of module shade is good the use for the window or roof glazing of office, library, classroom, etc. to adapt. The BIPV modules took generally speaking a function as building material to the daylight use, shading, isolation and also to the sight. That means that BIPV modules have as multifunctional system to sustainable architecture good successes and they are at the same time as Design element for architecture effectively.

• 한국지능시스템학회논문지
• /
• 제24권1호
• /
• pp.71-77
• /
• 2014

본 논문에서는 저조도 및 음영이 생기는 조명 환경하에서 성능이 개선된 계량기 숫자 인식 방법을 제안한다. 저조도 및 음영 문제를 해결하기 위해 LN(Local Normalization) 처리 기법을 이용한 조명 정규화를 수행한 후, 계량기 숫자 영역 검출과 3단계 계량기 숫자 분할이 이루어진다. 마지막으로 분할된 숫자 데이터를 분류하기 위한 하이브리드 숫자 분류기가 적용된다. 제안된 하이브리드 숫자 분류기는 역전파 신경망과 템플레이트 매칭의 연속 결합으로 이루어지고, 계량기 숫자 분류에 보다 강인한 휴리스틱 규칙에 의해 최종적으로 숫자를 분류한다. 저조도 및 음영 조명 환경하의 다양한 계량기 종류에 대해 직접 촬영하여 자체 제작한 계량기 이미지 데이터베이스에 기반한 실험을 통해 본 논문에서 제안한 숫자 인식 방법을 평가하고, 제안된 계량기 숫자 인식 방법이 효과적으로 잘 동작함을 확인하였다.

• KIEAE Journal
• /
• 제14권5호
• /
• pp.67-73
• /
• 2014

This study aims at examining kinetic efficient shading systems and their implementation methods. These days, the importance of the shading devices are getting more significant due to the energy problem. Cordially, suitable shade designs are required as an important element for the exterior envelope of the building. This study employs the optimal shading design as an efficient shading method with the kinetic system that can be converted actively by the altitude of the sun. The proposed kinetic shading system works not only as a lightshelf in case the altitude of the sun is high but also as a vertical louver when the sun is getting lower in order to block the direct sunlight. This study has analyzed the thermal performance and shading coefficient of the kinetic shading system in comparison to existing fixed shading devices using the Ecotect. The results, in sum, conclude that the suggested kinetic shading system could decrease direct sunlights 26.2% more than the existing shading methods.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제18권3호
• /
• pp.29-39
• /
• 2012

Window and shading designs have a great influence on energy consumption and daylighting in buildings. As far as energy is concerned, small window area is advantageous. But it is not good to the patient healing in hospital. So it is important to find out the optimum window shape which is favorable for both energy consumption and patient healing. In this study, annual energy consumption and daylight illumination levels were analyzed according to the window shapes and shading devices for a multi-beded patient room in hospitals. The simulations were conducted for 19 different cases by COMFEN 4.0 computer simulation program. The results of this paper are as follows. First, window to wall area ratio and shading devices have great influences on annual energy consumption. But it is a problem in that they decrease significantly daylight level in bed room. Second, considering the same energy consumption, reducing the width of window rather than the hight of window is desirable for the secure of daylight level. Third, increase of the number of horizontal shade is not desirable in south face of the building for the energy consumption and daylight level. Fourth, sun shade is not necessary in north face of the building for the energy consumption and daylight level.

• 대한치과보철학회지
• /
• 제25권1호
• /
• pp.41-54
• /
• 1987

The purposes of this study were to evaluate the color differences those can exist between different brands of porcelain with identical shade designation, and to find their causes. For these purposes the following experiments were executed: The color of each opaque and layered porcelain specimen was determined by spectral reflectance measurements with a spectrophotometer. The compositions of each opaque porcelain powder were analyzed by qualitative, and quantitative analysis. Microscopic structures of each opaque porcelain were observed by scanning electron microscope. The results were as follows: 1. Identical shade of different brands of porcelain produced significantly different colors. 2. Color differences among the three brands were found under different light sources. 3. Color differences among the three brands were mostly a result of differences in kinds and amounts of opacifying agents and fluxes and microstructure of porcelain systems. 4. When porcelain systems have similar compositions and firing cycles, they produced similar colors.

• 한국초지조사료학회지
• /
• 제7권1호
• /
• pp.8-17
• /
• 1987

Four foreign pasture cultivars such as Lotus corniculatus cv. Maitland, Trifolium pratense cv. Deben, Lolium perenne cv. $S_{23}$ and .Dactylis glomerata cv. $S_{26}$ were tested with "Kwisan" series, a common upland soil in Southern part of Korea. The cultivars in single or mixture were grown in pot with two levels of light intensity, i.e. a full sun light condition and 50% interception. Dry matter yield of top and root and their seasonal changes, the number of tillers or branches per plant and finally competative effects of mixtures were evaluated by estimating the expected yield, relative yield totals and compensation index. The results are summarized as follows: 1. Maitland showed a significant decrease in dry matter yield in shade condition, but the number of branches of Maitland was higher than those of Deben. 2. Maitland showed higher dry matter yield than Deben during the mid-summer period, while $S_{23}$, showed higher dry matter yield than $S_{26}$ during early season. 3. Mixtures of $S_{23}$ and Maitland, and $S_{26}$ and Deben gave better response to grasses by increasing the number of tillers in shade condition. 4. Combinations of Lotus corniculatus cv. Maitland and Dactylis glomerata cv. $S_{26}$ and Trifolium pratense cv. Deben and Dactylis glomerata cv. $S_{26}$ gave higher relative yield totals and higher compensation index, which envisages that the pasture establishment rates can be enhanced when those mixtures were sown by the oversowing method in the upland soil where phosphate level is very low and infertile in general.n general.

• 한국응용곤충학회지
• /
• 제61권4호
• /
• pp.657-658
• /
• 2022

농업 현장에서 사용되고 있는 진디벌류의 우화율을 향상시키기 위한 방안을 제안하고자 본 연구를 수행하였다. 농업 현장에 방사된 콜레마니 진디벌의 평균 우화율은 37.2%였으며, 우화율 제고를 위해 그늘막을 제공한 처리구에서는 54.4%, 그늘막과 수분을 공급해 준 처리구에서는 63.1%의 우화율을 확인하였다. 진디벌 방사 시, 그늘막과 수분을 공급해 준다면, 무처리보다 1.69배 높은 성충의 출현을 기대할 수 있을 것이다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2022년도 추계학술대회
• /
• pp.115-115
• /
• 2022

The Food and Agriculture Organization (FAO) has been estimating the potential of insects as human food and animal feed for convincing food security since 2010. On account of this reason, Tenebrio molitor larvae have been gaining considerable attention as an alternative protein source for various foods. However, consumers do not prefer them because of their disgusting appearance. Therefore, it is necessary to develop a method that improve their appearance as to lead to T. molitor larvae consumption. In this study, T. molitor larvae which is prepared for optimally sampling conditions (shade drying, 30 min boiling after hot air drying, 30 min steaming after hot air drying), were cultured with Cordyceps militaris mycelia, and measured growth and density of mycelial. Also analyzed the cordycepin and adenosine content compared with commercial C. militaris. As a result, T. molitor larvae cultivated with C. militaris mycelia showed the highest cordycepin content (13.75 mg/g) was observed in optimal sampling conditions (shade drying). Therefore, we report that the methods which T. molitor larvae cultivated with C. militaris mycelia not only improve their appearance but also increase cordycepin content, which can be contributed to lead T. molitor larvae consumption.

• 조명전기설비학회논문지
• /
• 제23권2호
• /
• pp.18-26
• /
• 2009

광센서 조광제어시스템은 주광을 이용하여 인공조명을 제어하는 대표적인 조명제어시스템이다. 그러나 실내에 설치된 고정된 쉐이딩시스템으로 인해 주광유입을 차단함으로써 광센서 조광제어시스템의 현장 적용성은 낮다. 광센서 조광제어시스템의 적용성 및 정확성의 향상을 위해 자동 롤러쉐이딩 시스템과의 통합은 필수적이다. 따라서 본 연구는 롤러쉐이드의 높이에 따른 주광유입분포의 특성을 분석하기 위하여 Mock-up(1/2스케일) 테스트를 시행하였다. Mock-up은 롤러쉐이드가 설치된 2개의 실과 쉐이딩시스템이 없는 1개의 실로 구성되었다. 롤러쉐이드가 설치된 2개의 실 중 1개소는 롤러쉐이드의 높이를 최하단으로 고정하였고, 다른 1개의 실은 태양의 일영각을 기준으로 직사일광의 실내유입깊이를 정하여 산출된 롤러쉐이드의 높이로 제어하였다.