• Economic and Environmental Geology
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2013

We proposed the revised full-pattern-fitting method of illite polytype quantification with background correction and scale factor correction of WILDFIRE(C) simulated pattern, and R% value ((${\sum}$|simulated-measured|/simulated)/ $n{\times}100$) calculation, and then verified the reliability of this method by applying for the test sample ($2M_1$:1M$$\frac{._-}{.}$$1:1), and by comparing the result with Grathoff and Moore method (1996). We confirmed that the proposed method showed the error range of less than 3.6%, which is much lower than the previous full-pattern-fitting methods, in spite of the impurities of the test sample. In the comparison with Grathoff and Moore method for 2 tested samples, we obtained the relatively higher $2M_1$ contents using Grathoff and Moore method, whereas we obtained the reliable results with less than 10% of R% values.

• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.192-203
• /
• 2007

Objective: The aim of this study was assessment of the relationship between airway space and facial morphology in Class III children with nasal obstruction. Methods: For this study, 100 Class III children (50 boys and 50 girls) were chosen. All subjects were refered to ENT, due to nasal obstruction. Airway space measurements and facial morphology measurements were measured on lateral cephalometric radiograph. Pearson correlation analysis was used to assess the relationship between airway space and facial morphology Results: Ramal height, SNA, SNB, PFH, FHR and facial plane angle were positively related to upper PAS, and sum of saddle angle, articular angle, and genial angle, SN-GoGn, Y-axis to SN and FMA negatively related to upper PAS. Genial angle, FMA were positively related to lower PAS, and articular angle, facial depth, PFH and FHR negatively related to lower PAS. PCBL, ramal height, Mn. body length, Mn. body length to ACBL, facial depth, facial length, PFH and AFH were positively related to tonsil size. Sum of saddle angle, articular angle, genial angle, facial length, AFH, FMA and LFH were positively related to tongue gap, and IMPA and overbite was negatively related to tongue gap. Upper PAS, related to size of adenoid tissue, was mainly related to posterior facial dimension following a vertical growth pattern of face and mandibular rotation. Lower PAS and tonsil size, related to anterior-posterior tongue base position, were significantly related to each other. Lower PAS was related to growth pattern of mandible, and tonsil size was related to size of mandible and horizontal growth pattern of face. Tongue gap was related to anterior facial dimension following a vertical growth pattern of face. Conclusion: Significant relationship exists between airway space and facial morphology.

• Journal of Hydrogen and New Energy
• /
• v.24 no.1
• /
• pp.84-90
• /
• 2013

The hydrogen or oxygen gas producted by electrolysis become many bubbles in the electrolyte, but exact data on the behavior of these bubbles in the separator of an electrolysis stack didn't become known. In this study, the flow visualization experiment on the behavior of bubbles in the flow pattern of the array type separator is performed by using of a visible alkaline electrolysis stack and a stereoscopic microscope. As the results, a fine size bubbles adhered to the surface of the flow pattern grow to large sized bubbles until each bubble's buoyance is lager than the sum of external force and weight. And then the large bubbles flow into the upper area of the separator. Bubbles adhered to the surface of the vertical flow pattern grow quickly than them adhered to the surface of the horizontal flow pattern. Also, he electrolysis efficiency is declined because many multi-size bubbles occupied the wide volume in the flow pattern.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.9
• /
• pp.4109-4114
• /
• 2015

Background: Full-field digital mammography (FFDM) with dense breasts has a high rate of missed diagnosis, and digital breast tomosynthesis (DBT) could reduce organization overlapping and provide more reliable images for BI-RADS classification. This study aims to explore application of COMBO (FFDM+DBT) for effect and significance of BI-RADS classification of breast cancer. Materials and Methods: In this study, we selected 832 patients who had been treated from May 2013 to November 2013. Classify FFDM and COMBO examination according to BI-RADS separately and compare the differences for glands in the image of the same patient in judgment, mass characteristics display and indirect signs. Employ Paired Wilcoxon rank sum test was used in 79 breast cancer patients to find differences between two examine methods. Results: The results indicated that COMBO pattern is able to observe more details in distribution of glands when estimating content. Paired Wilcoxon rank sum test showed that overall classification level of COMBO is higher significantly compared to FFDM to BI-RADS diagnosis and classification of breast (P<0.05). The area under FFDM ROC curve is 0.805, while that is 0.941 in COMBO pattern. COMBO shows relation of mass with the surrounding tissues, the calcification in the mass, and multiple foci clearly in breast cancer tissues. The optimal sensitivity of cut-off value in COMBO pattern is 82.9%, which is higher than that in FFDM (60%). They share the same specificity which is both 93.2%. Conclusions: Digital Breast Tomosynthesis (DBT) could be used for the BI-RADS classification in breast cancer in clinical.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1033-1038
• /
• 1995

NC 공작기계의 contour 운동 오차를 측정하기 위하여 사용되는 Ball-Bar에 의한 원호 보간 시험 데이터를 이용하여 NC controller의 성능을 평가 할 수 있는 S/W에 의한 방법을 제시한다. 본 논문에서 지금까지는 분석이 어려웠던 Masrer-Slave Changeover의 분석을 가능하게 하였으며, Ball-Bar로 부터 얻어지는 데이터를 Weighted Residual Method에 의한 종합적인 분석을 하였으며, 오차 원인별 비교를 위해 Eztra Sum of Squares Method를 도입하였다. 본 연구의 실제 적용을 위한 측정 및 분석 S/W를 개발하였으며, 결과적으로 NC controller의 성능평가에 유용함을 알 수 있었다. 무부하 조건에서의 Ball-Bar에 의한 분석 데이터와의 비교를 위하여 원형 시편을 가공하고, 진원도 측정 및 분석을 통하여 유사한 오차 pattern을 가짐을 알 수 있었다.

• International journal of advanced smart convergence
• /
• v.7 no.4
• /
• pp.92-100
• /
• 2018

This paper presents a link adaptation scheme for adaptive full duplex (AFD) systems. The signal modulation levels and communication link patterns are adaptively selected according to the changing channel conditions. The link pattern selection process consists of two successive steps such as a transmit-receive antenna pair selection based on maximum sum rate or minimum maximum symbol error rate, and an adaptive modulation based on maximum minimum norm. In AFD systems, the antennas of both nodes are jointly determined with modulation levels depending on the channel conditions. An adaptive algorithm with relatively low complexity is also proposed to select the link parameters. Simulation results show that the proposed AFD system offers significant bit error rate (BER) performance improvement compared with conventional full duplex systems with perfect or imperfect self-interference cancellation under the same fixed sum rate.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.4
• /
• pp.1051-1055
• /
• 2007

The diagnosis of pattern identification in Korean Medicine depend on Korean Medicine doctor's experience and information. So, Pattern identification in Korean Medicine raise a question of objectification. This study is to standard stroke pattern identification in Korean Medicine. Weight of symptoms was given important(1points), very important(2points) by stroke specialist. So weight of symptoms is used two method. One is total sum and the other is total man. One had been compared Pattern identification between diagnosed patients by medical specialists and by applicated weight in case report form. The other had been compared Pattern identification between intersubjectivity by medical specialists and by applicated weight in case report form. It is 38%(total sum) or 40%(total man) concordance rate between diagnosed patients by medical specialists and by applicated weight in case report form. It is 82.4% concordance rate between intersubjectivity by medical specialists and by applicated weight in case report form. To acquire more concrete data on this theme, we need further and large scale of prospective researches.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.2
• /
• pp.53-59
• /
• 2018

This paper proposes a pseudo-random beamforming technique for time-synchronized mobile base stations (BSs) for multi-cell downlink networks which have mobility. The base stations equipped with multi-antennas and mobile stations (MSs) are time-synchronized based on global positioning system (GPS) signals and generate a number of transmit beamforming matrix candidates according to the predetermined pseudo-random pattern. In addition, MSs generate receive beamforming vectors that correspond to the beam index number based on the minimum mean square error (MMSE) using transmit beamforming vectors that make up a number of transmit beamforming matrices and wireless channel matrices from BSs estimated via the reference signals (RS). Afterward, values of received signal-to-interference-plus-noise ratio (SINR) with regard to all transmit beamforming vectors are calculated, and the resulting values are then feedbacked to the BS of the same cells along with the beam index number. Each of the BSs calculates each of the sum-rates of the transmit beamforming matrix candidates based on the feedback information and then transmits the calculated results to the BS coordinator. After this, optimum transmit beamforming matrices, which can maximize a sum-rate of the entire cells, are selected at the BS coordinator and informed to the BSs. Finally, data signals are transmitted using them. The simulation results verified that a sum-rate of the entire cells was improved as the number of transmit beamforming matrix candidates increased. It was also found that if the received SINR values and beam index numbers are feedbacked opportunistically from each of the MSs to the BSs, not only nearly the same performance in sum-rate with that of applying existing feedback techniques could be achieved but also an amount of feedback was significantly reduced.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.5
• /
• pp.316-321
• /
• 2000

Blast severity data of 39 rice varieties at 11 sites in Korea from 1997 to 1999 were analyzed using AMMI model and pattern analysis. Genotype x Environment (G$\times$E) interaction sum of squares (SS) accounted for 12 % of the total SS. Eight genotype groups and seven location groups were identified based on blast reaction pattern. The data obtained from over 21 sites with 44 test varieties from 1981 to 1996 were also considered. These were compared with the 1997-1999 data using the G$\times$E analysis results. Majority of the variability in the Korean Rice Blast Nursery (KRBN) were attributable to variations due to genotypes. Variations of G$\times$E interaction were maintained though test sites were reduced from 21 to 11 sites. Broadly compatible biological discriminative varieties identified were Nagdongbyeo and Akibare while broadly incompatible biological discriminative varieties identified were Hangangchalbyeo and Seogwangbyeo. Key sites for future evaluation work could be selected from location groups. Each location group should be represented by the site with the strongest interaction pattern. Blast responses in Cheolwon, Gyehwa, Suwon, Iksan, and Icheon showed different patterns from other locations.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.3
• /
• pp.210-216
• /
• 2006

In the rule based modeling, data partitioning plays crucial role be cause partitioned sub data set implies particular information of the given data set or system. In this paper, we present an empirical study result of the data pattern estimation to find underlying data patterns of the given data. Presented method performs crisp type clustering with given n number of data samples by means of the sequential agglomerative hierarchical nested model (SAHN). In each sequence, the average value of the sum of all inter-distance between centroid and data point. In the sequel, compute the derivation of the weighted average distance to observe a pattern distribution. For the final step, after overall clustering process is completed, weighted average distance value is applied to estimate range of the number of clusters in given dataset. The proposed estimation method and its result are considered with the use of FCM demo data set in MATLAB fuzzy logic toolbox and Box and Jenkins's gas furnace data.