• 한국해양학회지
• /
• v.20 no.1
• /
• pp.74-82
• /
• 1985

Exposed on the sea, the oils are affected by the combined effects of evaporation, solution, chemical oxidation, and biological decomposition. Therefore the samples were taken after artificial weathering, and they were analyzed by gas chromatography for sulfur and hydrocarbons. The measurement results of gas chromatography have shown characteristic patterns. The peaks of the lower hydrocarbons in pollutant oil decreased with time. But the chromatograms for sulfur compound analysed by FPD showed little changes with lapse of time. The hydrocarbon and sulfur compound analysis by gas chromatography can be effectively used for analyzing oils for comparative identification.

• Macromolecular Research
• /
• v.13 no.1
• /
• pp.30-38
• /
• 2005

Sulfur-cured gum natural rubber vulcanizates were devulcanized using two different concentrations of diallyl disulfide. The devulcanization process was performed at $110^{\circ}C$ min in an open two-roll cracker-cum-mixing mill. Natural rubber vulcanizates having various sulfur/accelerator ratios were used to study the cleavage of monosulfide, disulfide, and polysulfide bonds. The properties of devulcanized natural rubber increased upon increasing the disulfide concentration and the mechanical properties of the revulcanized natural rubber increased upon decreasing the sulfur content in the original rubber vulcanizates. The scorch time and the maximum state of cure both increased when the ground vulcanizates were treated with higher amounts of disulfide. TGA and DMA were conducted to study the effects of the devulcanization on the thermal stability and the $T_g$ behavior of the vulcanizates. SEM analysis was conducted to study how the failure mechanism was affected by the devulcanization process. It was possible to recover $70-80\%$ of the original gum rubber properties by using this process. From IR spectroscopic analysis, we observed that the oxidation of the main chains did not occur during high-temperature milling.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.1
• /
• pp.123-129
• /
• 2007

A 2-step process for the safe destruction of chemical wafare agents(agent hydrolysis followed by supercritical water oxidation) was studied to obtain kinetic data for the pilot plant design. This process is simple to operate by using commercial equipments and could be applied as an alternative technology to incineration. Sarin(GB) and sulfur mustard(HD) were hydrolysed in sodium hydroxide and water respectively and their hydrolysates and OPA, which is binary agent for GB were oxidized in a continuous flow supercritical water oxidation system. Destruction efficiencies of the materials were above 99.99% in supercritical water.

• Journal of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.567-574
• /
• 1988

Kinetic studies on the vanadium(IV)-catalyzed oxidation of dimethylsulfoxide by hydrogen peroxide in water and aqueous methanol and ethanol show that the reaction is the first order in the concentration of dimethylsulfoxide and hydrogen peroxide, respectively. Activation parameters are also measured for the oxidation of dimethylsulfoxide. It is suggested that the rate determining step is a process involving oxidation of dimethylsulfoxide as the result of nucleophilic attack by the sulfur on the O-O bond of vanadium(V)-peroxide complex.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.6
• /
• pp.811-817
• /
• 2013

A two-stage bioreactor system using sulfur-oxidizing bacteria was studied to abate high strength hydrogen sulfide ($H_2S$) from biogas. The two-stage bioreactor consisted of a $H_2S$ absorption column (0.5 L) and a microbial oxidation column (1 L) in series, and the liquid medium was continuously recirculated through the columns. The objectives of this study were to determine the feasibility of the bioreactor for biogas desulfurization and to investigate the effect of the medium circulation rate on the system performance. An averaged concentration of $H_2S$ introduced to the bioreactor was 530 ppm, corresponding to an overall loading rate of $44.4g/m^3/hr$. During the initial 20 days period at the medium recirculation rate of 8 reactor volumes per hour (12 L/hr), the dissolved oxygen (DO) concentration in the oxidation column was 6 mg/L, while the DO in the absorption column was 0.5 mg/L showing that the oxygen contents of the biogas stream was not altered. Because of the biological oxidation of $H_2S$ in the oxidation column, the sulfate concentration increased from 200 mg/L to 5,600 mg/L in the liquid medium. The removal efficiency of $H_2S$ was greater than 99% in the initial operation period. After the initial period, the medium recirculation rate between the two columns was stepwise changed eight times from 1.0 to 40 vol/hr (1.5~60 L/hr). At the recirculation rate of faster than 4 vol/hr, the $H_2S$ removal efficiencies were found to be high, but the efficiency declined at the lower recirculation rates than the threshold.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.225-230
• /
• 2013

A new heteropolyanion-based ionic ($[Hmim]_5PMo_{10}V_2O_{40}$) was synthesized by the reaction of molybdovanadophosphoric acid ($H_5PMo_{10}O_{40}$) with N-methylimidazole. [$[Hmim]_5PMo_{10}V_2O_{40}$ showed a high catalytic activity in the oxidative desulfurization of sulfur-containing compounds in 1-methylimidazolium tetrafluoroborate ($[Hmim]BF_4$) ionic liquid using 30% aqueous $H_2O_2$ as the oxidant. The catalytic system was of high activity, simplified workup and flexible recyclability. The catalytic oxidation reactivity of sulfur-containing compounds decreased in the order dibenzothiophene (DBT) > 4,6-dimethyldibenzothiophene (4,6-DMDBT) > benzothiophene (BT). The influences of various parameters including reaction time (t) and temperature (T), catalyst dosage, and oxidant to sulfur molar ratio n(O)/n(S) on the desulfurization of model oil were investigated in details. 99.1% of DBT conversion in the model oil was achieved at atmospheric pressure under the optimal conditions: n(O)/n(S) = 4:1, $60^{\circ}C$, 100 min and molar ratio of catalyst to sulfur of 0.062. The ionic liquid can be recycled six times without significant decrease in activity.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.567-573
• /
• 2017

In this work, tungsten oxide ($WO_x$) supported on SBA-15 (mesoporous silica) were prepared and applied for oxidative desulfurization of sulfur compounds in marine diesel containing about 230 ppmw of sulfur concentration. Prepared catalysts were examined by two steps; at first step, oxidation reaction carried out with hydrogen peroxide as oxidant and then the oxidized sulfur compounds were extracted by acetonitrile as solvent. Catalysts were characterized by using X-ray diffraction, X-ray fluorescence, X-ray photoelectron spectroscopy and $N_2$ adsorption-desorption isotherms. Tungsten oxide exists as monoclinic crystal system on SBA-15 and over about 10 wt% of the $WO_x$ loading took the form of multi-layers on SBA-15. The 13 wt% $WO_x$/SBA-15 catalyst exhibite highest activity, achieving about 76.3% sulfur removal in the reaction conditions, such as catalyst amount of 0.1 g, reaction temperature at $90^{\circ}C$, reaction time for 3 h and O/S molar ratio of 10. One time oxidation reaction is enough oxidize the sulfur compounds in marine diesel completely. The repetition experiment of extraction process indicated that sulfur removal could reach 94.4% after 5 times.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.5
• /
• pp.246-250
• /
• 2019

Nano-multilayered $Cr_{25.2}Al_{19.5}Si_{4.7}N_{50.5}$ films were deposited on the steel substrate by cathodic arc plasma deposition. They were corroded at $900^{\circ}C$ in $Ar/1%SO_2$ gas in order to study their corrosion behavior in sulfidizing/oxidizing environments. Despite the presence of sulfur in the gaseous environment, the corrosion was governed by oxidation, leading to formation of protective oxides such as $Cr_2O_3$ and ${\alpha}-Al_2O_3$, where Si was dissolved. Iron diffused outward from the substrate to the film surface, and oxidized to $Fe_2O_3$ and $Fe_3O_4$. The films were corrosion-resistant up to 150 h owing to the formation of thin ($Cr_2O_3$ and/or ${\alpha}-Al_2O_3$)-rich oxide layers. However, they failed when corroded at $900^{\circ}C$ for 300 h, resulting in the formation of layered oxide scales due to not only outward diffusion of Cr, Al, Si, Fe and N, but also inward movement of sulfur and oxygen.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.2
• /
• pp.43-52
• /
• 2021

The Ni-based superalloy, Inconel 740, was corroded between 800 and 1100℃ for up to 100 hr in air and Ar-0.2%SO₂ gas in order to study its corrosion behavior in air and sulfur/oxygen environment. It displayed relatively good corrosion resistance in both environment, because its corrosion was primarily dominated by not sulfidation but oxidation especially in Ar-0.2%SO₂ gas. Such was attributed to the thermodynamic stability of oxides of alloying elements when compared to corresponding sulfides. The scales consisted primarily of Cr₂O₃, together with some NiAl₂O₄, MnCr₂O₄, NiCrMnO₄, and rutile-TiO₂. Sulfur from SO₂ gas made scales prone to spallation, and thicker. It also widened the internal corrosion zone when compared to air. The corrosion resistance of IN740 was mainly indebted to the formation of protective Cr₂O₃-rich oxides, and suppression of the sulfide formation.

• Food Science of Animal Resources
• /
• v.36 no.6
• /
• pp.729-736
• /
• 2016

This study was performed to evaluate the quality of fermented sausages manufactured with processed sulfur-fed pigs. The fermented sausages were divided into two groups; one was manufactured with non sulfur-fed pigs (NP), the other one was made with processed sulfur-fed pigs (SP). No differences were found in moisture and fat contents (p>0.05) between NP and SP, but the protein and ash con-tents of SP were significantly higher than those of NP (p<0.05). The pH of SP was significantly lower than that of NP, and the water activity ($a_w$) of SP was significantly higher than that of NP after 14 and 21 d (p<0.05). The TBA (Thiobarbituric acid reactive substance) w value of SP was significantly lower than that of NP (p<0.05). The lightness and yellowness of NP were significantly higher than those of SP, whereas the redness of NP was lower than SP (p<0.05). The total plate count of SP was lower than that of NP (p<0.05). There was no significant difference in TPA (Texture profile analysis) between the two samples. SP showed significantly increased monounsaturated fatty acid (p<0.05) and decreased saturated fatty acid. Umami taste and richness in SP were significantly higher than in NP (p<0.05). Therefore, it is suggested that processed sulfur fed pigs may play a key role in enhancing the quality of meat products.