• Corrosion Science and Technology
• /
• 제22권3호
• /
• pp.201-213
• /
• 2023

Corrosion management of an aircraft and its engine relies on rinsing and cleaning using tap water. Few studies have reported effects of tap water species on corrosion behaviors of structural materials. In this study, a series of experiments were conducted based on the design of experiment. Solutions with different levels of chloride and sulfate ions were prepared using a full factorial design. Two structural materials (aluminum alloy and steel) were used for an alternate immersion test. Weight loss was then measured. In addition, a silver specimen was utilized as a sensor for chloride deposition measurement. The silver specimen was examined using the electrochemical reduction method, XPS, and SEM-EDS. Surface analysis revealed that levels of chloride and sulfate ions were sufficient for the formation of silver chloride and silver surface. Statistical analysis of weight loss and chloride deposition rate showed significant differences in measured values. Concentration of chloride ions greatly affected corrosion behaviors of structural materials. Sulfate ion hindered the adsorption reaction. These results emphasize the importance of controlling ion concentration of tap water used for cleaning and rinsing an aircraft.

• Geomechanics and Engineering
• /
• 제16권4호
• /
• pp.375-384
• /
• 2018

Unconfined compressive strength (UCS) of high plasticity clayey soil mixed with 5 and 10 % of Portland cement and four chemical agents such as sodium hexametaphosphate, aluminum sulfate, sodium carbonate, and sodium silicate with 0, 5, 10, and 20% concentrations was comparatively evaluated. The individual and combined effects of the cement and chemical agents on the UCS of the soil mixture were investigated. The strength of the soil-cement mixture generally increases with increasing the cement content. However, if the chemical agent is added to the mixture, the strength of the cement-chemical agent-soil mixture tends to vary depending on the type and the amount of the chemical agent. At low concentrations of 5% of aluminum sulfate and 5% and 10% of sodium carbonate, the average UCS of the cement-chemical agent-soil mixture slightly increased compared to pure clay due to increasing the flocculation of the clay in the mixture. However, at high concentrations (20%) of all chemical agents, the UCS significantly decreased compared to the pure clay and clay-cement mixtures. In the case of high cement content, the rate of UCS reduction is the highest among all cement-chemical agent-soil mixtures, which is more than three times higher in comparison to the soil-chemical agent mixtures without cement. Therefore, in the mixture with high cement (> 10%), the reduction of the USC is very sensitive when the chemical agent is added.

• 한국환경농학회지
• /
• 제26권2호
• /
• pp.131-140
• /
• 2007

Phospho-gypsum a primary waste by-product in phosphate fertilizer manufacturing industry and a potential source of electron acceptors, such as mainly of sulfate and a trace amount of iron and manganese oxides, was selected as soil amendment for reducing methane $(CH_4)$ emissions during rice cultivation. The selected amendment was added into potted soils at the rate of 0, 2, 10, and 20 Mg $ha^{-1}$ before rice transplanting. $CH_4$ flux from the potted soil with rice plant was measured along with soil Eh and floodwater pH during the rice cultivation period. $CH_4$ emission rates measured by closed chamber method decreased with increasing levels of phospho-gypsum application, but rice yield markedly increased up to 10 Mg $ha^{-1}$ of the amendment. At this amendment level, total $CH_4$ emissions were reduced by 24% along with 15% rice grain yield increment over the control. The decrease in total $CH_4$ emission may be attributed due to shifting of electron flow from methanogenesis to sulfate reduction under anaerobic soil conditions.

• 유기물자원화
• /
• 제15권4호
• /
• pp.131-137
• /
• 2007

황산염 환원조건에서의 리그노셀룰로오스의 분해에 대하여 고찰하였다. 특히, 리그닌에 대한 셀룰로오스의 비(C/L 비)를 각각 42.15, 4.59, 2.51, 1.14, 0.7로 하여 리그닌과 셀룰로오스의 상호작용에 대하여 고찰하였다. 셀룰로오스의 분해율은 1차 반응식에 의해 계산되어져, C/L 비가 감소할수록 반응상수는 감소하여 셀룰로오스의 분해에 대한 리그닌의 저해작용을 보여 주였다. 1차 반응식에 의한 반응상수와 리그닌의 함량의 증가에 대한 셀룰로오스의 분해율은 0.97의 $R^2$ 값을 가지며 로그힘수에 의해 표현할 수 있었다. 리그노셀룰로오스의 분해율 또한 C/L 비와 로그함수의 관계를 가지며 리그닌의 함량이 많을수록 감소하였다. 리그닌의 분해율은 C/L 비가 2.51 및 1.14인 조건에서 4.59 및 0.7의 조건보다 높게 나타나, 공동기질로서의 과도한 탄소원은 리그닌분해에 장애가 됨을 보여 주였다.

• 한국광물학회지
• /
• 제24권3호
• /
• pp.217-224
• /
• 2011

철환원 박테리아인 미시가넨시스를 이용하여 용존 셀레늄을 제거할 때, 물 속의 다른 금속성분들인 철, 황산염, 그리 구리가 미칠 수 있 영향을 살펴보았다. 미시가넨시스 박테리아는 산화수가 4가인 산화 셀레나이트(2 mM)를 셀레나이드로 환원시키고 물속의 셀레늄 농도를 점차 감소시켰다. 환원된 셀레나이드는 용존 2가 철과 결합하여 나노입자 크기의 철-셀레나이드로 침전되었다. 용존 황산염과 구리는 미생물의 셀레나이트 환원작용에 부정적인 영향을 끼쳤는데, 특히 구리 성분은 미생물에 대해 독성으로 작용하여 셀레나이트 제거가 원활히 이뤄지지 못하게 하였다. 이러한 결과로부터 알 수 있는 것은 셀레늄으로 오염된 현장을 미생물로 정화할 때 황산염 혹은 구리의 농도 분포와 양을 충분히 고려해야 한다는 사실이다. 궁극적으로 미생물에 의한 철-셀레나이드 광물형성작용은 지하수를 따라 원거리로 이동할 수 있는 셀레늄의 확산을 억제하는 중요한 수단이라고 볼 수 있다.

• 한국결정성장학회지
• /
• 제6권3호
• /
• pp.415-423
• /
• 1996

황산니켈염 수용액에서 가압수소환원법을 이용하여 알루미나 분말상에 니켈 코팅층을 형성하기 위하여 실험조건(수소분압, 반응온도, $PdCl_{2}$ 첨가량, 알루미나의 종류 및 입도)을 변화시키면서 니켈이온의 환원속도 및 석출상태를 조사하였다. 환원온도 $165^{\circ}C$, 수소분압 300 psi, 코팅촉매제 $PdCl_{2}\;2\;mg/\ell$를 첨가한 조건에서 균질한 니켈코팅층을 얻을 수 있었다.

• 한국분말재료학회지
• /
• 제26권4호
• /
• pp.340-344
• /
• 2019

Due to the rapid development of electricity, electronics, information communication, and biotechnology in recent years, studies are actively being conducted on nanopowders as it is required not only for high strengthening but also for high-function powder with electric, magnetic, and optical properties. Nonetheless, studies on nickel nanopowders are rare. In this study of the synthesis of nickel nanoparticles from $LiNiO_2$ (LNO), which is a cathode active material, we have synthesized the nanosized nickel powder by the liquid reduction process of $NiSO_4$ obtained through the leaching and purification of LNO. Moreover, we have studied the reduction reaction rate according to the temperature change of liquid phase reduction and the change of particle size as a function of NaOH addition amount using hydrazine monohydrate ($N_2H_4{\cdot}H_2O$) and NaOH.

• 대한환경공학회지
• /
• 제31권6호
• /
• pp.434-441
• /
• 2009

황산염의 농도변화에 따른 연속 혐기성 수소 발효에 미치는 영향을 고찰하기 위해서 혼합균주를 사용한 완전 혼합형 반응조를 운전하였다. 기질은 글루코오스를 사용하였고, 수리학적 체류시간은 1, 0.5, 0.25 일로 각각 고정하였다. 황산염 농도는 0${\sim}$20,000 mg/L로 단계별 증가시켰고 pH 5.5로 운전하였다. 실험 결과 높은 황산염 농도에 관계없이 수소가 발생하였고, HRT 0.25일로 짧아짐에 따라 수소 발생이 높게 나타났다. HRT 1, 0.5, 0.25일 각 조건별 수소 생성량과 수소 수율은 2.9, 4.6, 9.4 L/day, 2.0, 1.8, 1.6 mol $H_2$/mol glucose로 나타났으며, 잔존 황산염 96${\sim}$98, 95${\sim}$97 94${\sim}$97%로 나타나 황산염 환원이 발생하지 않았다. FISH 결과 모든 조건에서 수소생성균의 분포는 나타났지만 황산염환원균의 분포는 나타나지 않았다.

• Journal of Microbiology and Biotechnology
• /
• 제6권4호
• /
• pp.232-237
• /
• 1996

Growth yield of Desulfovibrio desulfuricans M6 was measured using different substrates. The cell yield of fermentative growth on pyruvate was 6.22 g cell $mol^{-l}$ pyruvate. Since 1 ATP is available from substrate-level phosphorylation from the oxidation of pyruvate to acetate, $Y_{ATP}$ of the bacterium should be the same as $Y_{pyruvate}$ (6.22 g cell $mol^{-l}$ ATP). The cell yields of the bacterium on different electron donors were measured with sulfate as the electron acceptor. Cell yields on lactate, pyruvate and $H_2$ were 9.39, 13.76 and 8.45 g cell $mol^{-l}$ substrate, respectively. From these figures ATP available from electron-transport phosphorylation (ETP) of the electron donors used was calculated. ATP produced by ETP of each electron donnor were 1.71 from pyruvate, 1.51 from lactate and 1.76 from $H_2$. These values show that electrons from the oxidation of lactate to pyruvate are consumed to reduce sulfate through a reverse electron transport mechanism requiring 0.2 ATP for each pair of electrons. Based on these results, discussions are made on the electron transport mechanism in the bacterium.

• 펄프종이기술
• /
• 제37권3호
• /
• pp.59-65
• /
• 2005

There are accumulations of remained chemical additives and contaminants in the process water of semi-closed linerboard mill. High temperature of the process water aggravates the anaerobic digestion of contaminated process water and causes the generation of hazardous gases, which are from the biological reaction of varied additives and contaminants. The hydrogen sulfide in the gases easily combine with moisture in the air, and become sulfuric acid, which causes corrosion of paper machinery. This hydrogen sulfide is from the reduction of sulfate ions in the process water, and the sulfate ions are mostly from the alum. We changed the alum to PAC (Poly Aluminum Chloride). The results were preventing generation of hydrogen sulfide, and equivalent sizing effect by the use of PAC.