• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1126-1131
• /
• 2009

Suction Drain Method is soft ground improvement technique, in which a vacuum pressure can be directly applied to the Vertical Drain Board to promote consolidation and strengthening the soft ground. This method does not require a surcharge load, different to embankment or vertical drain method. In this study, Using Suction-CAIN program, which optimize th Suction Drain method, estimate validity Suction Drain method on deep soft ground

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1256-1263
• /
• 2010

Suction Drain Method is soft ground improvement technique, in which a vacuum pressure can be directly applied to the Vertical Drain Board to promote consolidation and strengthening the soft ground. This method does not require a surcharge load, different to embankment or Preloading Method. In this study, ground improvement efficiency of suction drain method was estimated when duplex loading pressure with vacuum and pressure. During suction drain method process, surface settlement and pore pressure were monitored, and cone resistance test as well as water content were also measured after the completion of Suction Drain Method treatment.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1165-1172
• /
• 2006

In this study, an aspect of settlement, developed from different ground improvement method like suction drain method using vacuum pressure and vertical drain method using overburden pressure, was compared each other. In order to analyze settlement tendency of each method exactly, the finite element analysis program was used. The analyses of vertical settlement and lateral displacement for suction drain method and vertical drain method were conducted independently during the solving stage. The initial condition of drainage zone was fixed with 25m depth and 21m width. After the program analyses, the settlement condition had a different tendency with the ground improvement method. Especially, in the results of vertical drain method, the disparity of settlement between the middle of improved zone and unimproved zone. In the case of suction drain method, however, the difference of settlement was smaller than that of vertical drain method.

• 대한토목학회논문집
• /
• 제29권6C호
• /
• pp.287-294
• /
• 2009

석션드레인공법은 지반 내 배수재를 타설하고 진공압을 배수재에 직접 가해 전응력이 일정한 상태에서 간극수를 배출하여 유효응력을 증가시키고 이로 인해 전응력의 변화 없이 강도를 증진하고 압밀 촉진을 유도하는 새로운 연약지반 개량 공법이다. 본 논문에서는 서해안 해성 점성토 지반에 적용된 석션드레인공법의 시공 사례를 제시하였다. 석션드레인공법이 적용된 지반의 개량효과를 확인하기 위해 현장 계측과 실내시험 결과를 분석하였으며, 수치해석을 통해 설계치와 실측치를 비교하였다. 석션드레인공법과 기존 성토재하공법의 침하량 비교결과 기존 성토재하공법을 대체할 수 있는 침하거동이 발생함을 확인 하였다. 현장 계측 및 실내시험을 통해 지반개량 효과를 분석한 결과 석션드레인공법 적용 지반의 침하량이 2.3배 더 크게 발생함을 확인하였으며, 개량 후 비배수 전단강도는 약 300~400% 증가하였다. 또한 함수비는 약 30% 감소하였으며, 선행압밀하중은 약 $0.52kgf/cm^2$ 정도가 증가하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.743-749
• /
• 2009

In this study, the field test for suction drain method which does not require a surcharge load and a sealing sheet was performed at west seashore's site constructed by the dredged and reclaimed clay. The improvements of soft ground by suction drain method was analyzed by the results of real-time field measurement, SPT(Standard Penetration Test) and laboratory tests. The results indicated that the soft ground improvement is effective the vertical drain method used with vacuum pressure rather than surcharge load with considering settlements, dissipation of pore water pressure and shear strength.

• 대한토목학회논문집
• /
• 제28권2C호
• /
• pp.75-81
• /
• 2008

본 연구에서는 연약지반을 목적에 맞게 개선하기 위한 방법으로 성토하중 및 멤브레인 등이 필요치 않은 석션드레인(Suction Drain)공법의 개량기간 및 적용 석션압에 따른 개량도를 파악하고 Hardening Zone의 영향을 파악하기 위한 일련의 실내 토조 실험을 실시하였다. 실험 조건은 석션압 적용기간을 4일, 8일, 12일, 16일, 20일, 적용 석션압을 -20kPa, -40kPa, -60kPa, -80kPa로 달리하여 실험을 실시하였다. 실험결과 침하량의 경우, 적용된 석션압 및 처리기간이 증가함에 따라 개량도는 증가하는 양상을 나타냈으며, 점차적으로 수렴하는 경향이 나타났다. 또한, 함수비로 역산된 투수계수 저하비와 변형된 Hansbo의 방사형 압밀이론에 의해 수치적으로 예측된 투수계수 저하비를 비교/분석한 결과 2~3으로 가정한 결과에서 실측치와 예측치에 가장 부합되는 결과가 나타났으며, Hardening Zone은 전체 영역 25cm 중 약 7~8cm 범위에서 발생됨을 파악할 수 있었다.

• Archives of Plastic Surgery
• /
• 제33권1호
• /
• pp.131-134
• /
• 2006

The closed suction drain is commonly inserted after various surgical procedures. It has an important role to prevent possible hematoma or seroma that can cause postoperative wound problems. But there is still no consensus on managing the insertion site of suction drain after operation. Suture-tie fixation of drain to skin and classical Y shape gauze dressing is a usually accepted method, but it has many limitations. We introduce a new approach to the care for the insertion site of suction drain by using occlusive transparent film dressing, $IV3000^{(R)}$(Smith & Nephew, London, UK). By using transparent film, insertion site of drain can be easily checked without removal of dressing. Because it can reduce the tension of suture-tie fixation, it helps to prevent skin injury. Furthermore, occlusive film dressing can block air leakage from insertion site of drain, and the water-proof character of film allows patients to take a shower without dressing change. This new method is more convenient, more efficient, and less harmful to skin than classic one.

• 대한토목학회논문집
• /
• 제28권6C호
• /
• pp.321-329
• /
• 2008

본 연구에서는 전통적인 압밀촉진공법의 단점을 보완하기 위한 방법으로 석션보드드레인 공법을 제안하고, 본 공법의 개량특성을 파악하기 위해, 배수재 종류 및 단계 진공압 조건에 따른 일련의 Column 실험을 실시하였다. 이때 실험 간 발생되는 침하량과 실험 종료 후 발생된 함수비 저감효과 및 강도증진효과를 파악하고, 개량 기간에 따른 압밀도를 파악하여 각 조건에 따른 최적의 석션보드드레인 공법 영향인자를 산정하고자 하였다. 각 배수재(포켓식 성곽형, 코일형, 하모니카 형, 원형 및 열융착식 성곽형배수재) 종류에 따른 개량 효과를 파악하기 위한 실험 결과, Core 형상(원형, 판형)과 필터의 Core 부착 여부(포켓식, 열융착식)에 의해 열융착식 성곽형 배수재와 포켓식 원형배수재의 배수효율이 다른 배수재의 경우 보다 좋게 나타났다. 단계석션압 조건 실험의 경우 최종 단계석션압인 $-0.8\;kg/cm^2$으로의 기간이 짧을수록 개량도가 크게 나타났다. 또한 각 석션압 단계 별 압밀도-적용기간 곡선 상의 변곡점을 이용하여 압밀효과를 극대화 시킬 수 있는 적용기간을 산정할 수 있었다.

• 해양환경안전학회지
• /
• 제21권3호
• /
• pp.303-308
• /
• 2015

Compressed air has many uses on board ship, ranging from diesel engine starting to the cleaning of machinery during maintenance. In an effort to enhance the performance of the marine compressed air system, this work studied a way to reduce condensation from the air compressor via experiments. Especially more condensation is produced when the temperature at compressor outlets and the humidity of the air are higher. so in the research, drain production change has been observed by additionally installing the cooling fan on the suction portion of the air to air compressor and this is the method for reducing the compressed air drain that has passed through the compressor. For the result, it was verified that when the cooling fan was used, less drain was made where per hour it was 500.9ml of drain and the measured result after installing the cooling fan was that less drain was made. Other additional and various researches are needed including experiments like silica gel passing through the suction portion afterwards.

• Archives of Plastic Surgery
• /
• 제43권3호
• /
• pp.288-290
• /
• 2016

We propose a safe, simple, and novel method to harvest fat using a standard liposuction cannula and a Redivac or alternative closed-suction drain. The authors have used this technique for both 'dry' and 'wet' liposuction. This technique is both easy to perform and cost-effective whilst providing both a silent and relatively atraumatic fat harvest. The lower negative pressure compared with traditional harvesting systems likely preserves fat integrity for lipofilling. This method maximises resources already held within a hospital environment.