• Food Science of Animal Resources
• /
• v.34 no.5
• /
• pp.683-691
• /
• 2014

The effects of sucrose stearate at various concentrations (0.1%, 0.2%, and 0.3%, w/v) on the physico-chemical characteristics of ready-to-eat (RTE) Samgyetang were investigated during storage at $25^{\circ}C$ for 12 mon. Over the storage duration, the addition of sucrose stearate had no significant effects on the proximate composition of Samgyetang, including meat, broth, and porridge, or the hardness and spreadability of the porridge, although it resulted in significantly higher CIE $L^*$ values for the porridge. The CIE $L^*$ values of Samgyetang porridge with added sucrose stearate increased until 9 mon, while the control decreased until 6 mon, and the values for both changed insignificantly thereafter. The breast meat of Samgyetang treated with sucrose stearate showed higher percentages of polyunsaturated fatty acid after 3 mon and lower percentages of monounsaturated fatty acid after 6 mon compared to the control (p<0.05), while no significant differences were observed with the different sucrose stearate concentrations (p>0.05). The overall sensory acceptability scores were higher at sucrose stearate concentrations of 0.2% or 0.3% after 6 mon and at 0.1% after 9 mon compared to those of the control.

• Food Science of Animal Resources
• /
• v.37 no.6
• /
• pp.855-864
• /
• 2017

The objective of this study was to assess the sensory-related characteristics of the broth and porridge of ready-to-eat (RTE) ginseng chicken soup (Samgyetang) with sucrose stearate added at various concentrations (0.1%, 0.2%, and 0.3%) during storage at $25^{\circ}C$ for 12 mon. Scores indicating the lightness and size of fat droplets in the broth increased during storage as the sucrose stearate concentration increased, while the clarity scores decreased until 9 mon and the taste scores decreased throughout the storage period (p<0.05). The porridge lightness increased as the concentration of sucrose stearate increased after 6 mon (p<0.05), while scores indicating the softness and vividness were higher for treated samples with sucrose stearate than for the control group after 3 mon, despite a lack of significant differences among treatment groups (p>0.05). The taste scores were lower for treated porridge samples than for the control group (p<0.05), even though no significant differences were observed among the treatment groups (p>0.05). The addition of sucrose stearate to the RTE Samgyetang broth improved the lightness (CIE $L^*$) value of the broth and various sensory palatability parameters, including the color and fat droplet size of the broth and the softness and vividness of the porridge, despite reductions in broth clarity and taste scores for the broth and porridge during storage.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.26 no.1
• /
• pp.261-274
• /
• 2000

The o/w emulsions were prepared with saccharide surfactants which were sucrose monostearate(S160), sucrose distearate(S110), and POE(20) methyl glucose stearate(SSE20). And for emulsion the oils used were n-hydocarbon, squalane(SQ), liquid paraffin(LP), octylpalmitate(OP), octylstearate(OS), alkyl benzoate(AB), isostearyl benzoate(ISB). The structures of o/w emulsion droplet were investigated by laser light scattering and the fractal dimensions were calculated from light intensity curves. Increasing of concentration, chain length, and nonpolarity of oils, fractal dimensions of emulsion droplets were found greater. In general fiactal dimensions were varied from 1.7 to 2.8 and its structures were fractal But the fractal dimensions of octadecane( $C_{18}$), 50, and LP emulsified with S110 and S160 were varied from 3.0 to 3.2 and its structures were more dense. The overall fractal dimensions of S110 and S160 were varied from 2.1 to 2.6, that of SSE20 were varied from 1.5 to 2.1. So it was found that the structures of SSE20 system were less compact than that of S110 and S 160 system, because the hindrance effect of polyoxyehtylene group of SSE20 was stronger than that of sucrose of S160. The strucures of emulsion droplets changed according to the nature of emulsifiers and to compositions of oil substances which they contained, and the structures were found similar when the hydophilic moiety of emulsifiers was same.

• Journal of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.283-290
• /
• 1981

The reaction rates for the transesterification reaction were measured on the excess sucrose with the five fatty acid methyl ester systems such as methyl laurate, methyl myristate, methyl palmitate, methyl stearate and methyl oleate at temperature range of $50^{\circ}C$ to $90^{\circ}C$ in N,N-dimethylformamide solvent and potassium carbonate as a catalyst. Their activation parameters as well as rate constants were calculated from these measurements. And these reactions were found to be pseudo-first order and depended mainly on the structural changes in fatty acid residue of methyl esters. Also their reactions were found to be of enthalpy-controlled, which were disfavored in the order of methyl laurate, methyl myristate, methyl palmitate, methyl oleate and methyl stearate. Correspondingly their activation energies were 9.3, 9.9, 10.3, 10.9 and 11.1 kcal/mole, respectively.

• Analytical Science and Technology
• /
• v.5 no.4
• /
• pp.477-484
• /
• 1992

The mitochondrion was purified at 44% sucrose layer from pleurotus florida by using ultracentrifuge and sucrose density gradient method. Optimum pH and temperature of ATPase and ATP synthase were pH 7.4, $60^{\circ}C$ and pH 7.5, $57^{\circ}C$ respectively, also their Km values were determined as 11.6mM and 8.4mM. ATPase was activated at 5~6mM ATP substrate concentration, then ATP synthase was 5~10mM range ADP. ATPase/ATP synthase were $Mg^{2+}$-dependent enzyme, partially inhibited by their substrate, and then showed an none competitive inhibition pattern by $G_{418}$. Amino acid composition of ATPase/ATP synthase was as follows, hydrophobic amino acid residue was 50.5%, small residue, 56.1%, hydrogen bonding residue, 43.7% and helix breaking residue, 55.2%. Phosphatidyl choline, phosphatidyl ethanolamine and phosphatidyl glycerol were contained but not phosphatidyl inositol and phosphatidyl serine. Palmitate(51.31%), stearate(18.32%) and unsaturated fatty acids($C_{18:1}$, $C_{18:2}$ and $C_{16:1}$) were predominated.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.116-122
• /
• 1998

It is well known that all-trans-retinol is not only very unstable in heat, light, air, and water, but also skin-irritant despite a good anti-wrinkle effect. Therefore, it is very difficult to stabilize retinol and make the safe retinol containing cosmetics by using a certain concentration of retinol with real effect. In order to dissolve these problems and apply retinol for skin care cream, firstly retinol is to be encapsulated in the vesicle called Liposphere (pseudo-liposome) which is made by homogenizing under high pressure the mixtures of lecithin, retinol, caprylic/capric triglyceride, and hydroalcoholic solution ; and then this retinol containing Liposphere is to be intercalated in lamellar liquid crystal layer which is prepared by emulsifying in an optimal ratio the mixtures composed of non-ionic emulsifier (cetearyl glucoside, sorbitan stearate & sucrose cocoate etc), cetearyl alcohol, stearic acid, cholesterol, and ceramide. In addition, the stability of the retinol containing oil in water cream by adding the polymeric emulsifier such as acrylate /C10-30 alkyl alkylate crosspolymer is to be ensured even at 55 C. Retinol containing oil in water cream prepared through above procedure could be very stable at 45 C for at least 50 days. The structure identification of lamellar liquid crystal was determined using polarized light microscope and electron microscope Conclusively, we could make the very stable retinol containing oil in water cream by triple procedure, that is, encapsulation of retinol in Liposphere, intercalation of retinol in lamellar liquid crystal layer, and assurance of the high temperature stability of cream even at 55 C.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2016

This study is to make the liquid crystalline structure using sucrose distearate (Sucro-DS) emulsifier to create the hydrophilic type oil-in-water (O/W) emulsion, the droplets of the emulsion having a structure of a multi-lamellar structure. We have studied the physicochemical properties of Sucro-DS using those techniques. And it has been studied in the emulsion performance. In order to form the liquid crystalline structure applying 3 wt% of Sucro-DS, 5 wt% of glycerin, 5 wt% of squalane, 5 wt% of capric/caprylic triglyceride, 3wt% of cetostearyl alcohol, 1wt% of glyceryl mono-stearate, 78 wt% of pure water in mixture having the lamellar structure of stable multi-layer system was found to formed. By applying them, they were described how to create an unstable active material encapsulated cream. Further, the moisturizing cream was studied using this technique. It reported the results to the skin improvement effect by the human clinical trials. The pH range to produce a stable liquid crystal phase using a Sucro-DS was maintained in 5.2~7.5. In order to increase the stability of the liquid crystal, it was when behenyl alcohol containing 3 wt%, the hardness at this time was 13 kg/mm,min. Viscosity of the same amount was 25,000mPas/min. After a test for the effects of the emulsions, the concentration of 6 wt% Sucro-DS is that was appropriate, the particle size of the liquid crystal was 4~6mm. It was observed through a microscope analysis, reliability of the liquid crystal changes for 3 months was found to get stable at each $4^{\circ}C$, $25^{\circ}C$ and $45^{\circ}C$. In clinical trial test, before applying a moisturizing effect it was $13.4{\pm}7%$. Moisturizing cream liquid crystal was not formed in $14.5{\pm}5%$. Therefore, applying than ever before could see the moisture about 8.2% was improved. On the other hand, it was the moisturizing effect of the liquid cream is $19.2{\pm}7%$. The results showed that 43.3% improvement than that previously used. Applications fields, Sucro-DS emulsifier used liquid cream, lotion, eye cream and a variety of formulations can be developed, as well as the cosmetics industry is expected to be wide fields in the application of the external preparation for skin emulsion technology in the pharmaceutical industry and pharmaceutical industry.