• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.30 no.3
• /
• pp.123-129
• /
• 2018

In this study, CFD is used to compare and analyze the flow characteristics using reflected pressure wave during the intersection of two trains in straight tunnel. Two tunnels of different lengths; 600 m and 3,400 m were designed and numerical analysis of the flow characteristics of two tunnels carried out by setting the crossing state of the two trains at a constant velocity of 27 m/s form the center of the tunnel. The simulation model was designed using the actual tunnel and subway dimensions The train motion was achieved by using the moving mesh method. For the numerical analysis, $k-{\omega}$ standard turbulence model and an ideal gas were used to set the flow conditions of three-dimensional, compressible and unsteady state. In the analysis results, it was observed that the inside of the long tunnel without interference of the reflected pressure wave was maintained at a pressure lower than the atmospheric pressure and that the flow direction was determined by the pressure gradient and shear flow. On the other hand, the flow velocity in the short tunnel was faster and the pressure fluctuation was noted to have increased due to the reflected pressure wave, with more vortices formed. In addition, the flow velocity was noted to have changed more irregularly.

• International Journal of Railway
• /
• v.7 no.3
• /
• pp.71-79
• /
• 2014

Subway systems have been a proved method of public transport and are widely used in major cities around the world. However, the time and cost it takes to construct such systems are very high, as it requires underground tunnels. Cities in various countries have implemented monorail systems as public railway transport as it can be more economical and quicker compared to subway systems in terms of construction. In addition, it provides more convenience towards the public as it is not affected to traffic, and also provides an aerial view of the city. However, the overall construction cost for monorail systems is still significantly high, and as a possible solution to further reduce the overall cost, implementation of ground-level stations and wireless power transfer technology has been proposed in this paper. A concept application layout of ground-level stations and wireless power transfer systems has been discussed, using the Daegu monorail Line 3 system as a simulation base. The expected cost for monorail systems implementing ground-level stations and/or wireless power transfer technology has been estimated based on literature survey, and was compared with the current construction cost of Daegu monorail system. Based on comparison, it has shown that implementation of ground-level stations are the most economical, and can be easily implemented for either starting or expanding the monorail line. Implementation of wireless power transfer technology is also economical, but is more feasible when starting a new monorail line as it requires components which will alter the configuration of the train and infrastructure.

• Safety and Health at Work
• /
• v.10 no.3
• /
• pp.377-383
• /
• 2019

Objectives: Exposure to fine particles in urban air has been associated with a number of negative health effects. High levels of fine particles have been detected at underground stations in big cities. We investigated the exposure conditions in four occupational groups in the Stockholm underground train system to identify high-exposed groups and study variations in exposure. Methods: $PM_1$ and $PM_{2.5}$ were measured during three full work shifts on 44 underground workers. Fluctuations in exposure were monitored by a real-time particle monitoring instrument, pDR, DataRAM. Qualitative analysis of particle content was performed using inductively coupled plasma mass spectrometry. Nitrogen dioxide was measured using passive monitors. Results: For all underground workers, the geometric mean (GM) of $PM_1$ was $18{\mu}g/m^3$ and of $PM_{2.5}$ was $37{\mu}g/m^3$. The particle exposure was highest for cleaners/platform workers, and the GM of $PM_1$ was $31.6{\mu}g/m^3$ [geometric standard deviation (GSD), 1.6] and of $PM_{2.5}$ was $76.5{\mu}g/m^3$ (GSD, 1.3); the particle exposure was lowest for ticket sellers, and the GM of $PM_1$ was $4.9{\mu}g/m^3$ (GSD, 2.1) and of $PM_{2.5}$ was $9.3{\mu}g/m^3$ (GSD, 1.5). The $PM_1$ and $PM_{2.5}$ levels were five times higher in the underground system than at the street level, and the particles in the underground had high iron content. The train driver's nitrogen dioxide exposure level was $64.1{\mu}g/m^3$ (GSD, 1.5). Conclusions: Cleaners and other platform workers were statistically significantly more exposed to particles than train drivers or ticket sellers. Particle concentrations ($PM_{2.5}$) in the Stockholm underground system were within the same range as in the New York underground system but were much lower than in several older underground systems around the world.

• Journal of the Korean Society for Railway
• /
• v.11 no.4
• /
• pp.378-383
• /
• 2008

In December 2006, the Ministry of Environment Republic of Korea established the guideline which is "Indoor Air Quality Management Guidelines in Public Transportation." as control items, $CO_2$ (carbon dioxide) and PM10 (particle matter) are classified two categories, that is, Level 1 (non-rush hour), Level 2 (rush hour). Therefore, the quality of air in train and subway should be controlled in accordance with the guideline. We took a measure the air freshness inside train twice at Line 4 (Tangogae-Oido), in Sep. 2007 and at Line 1 (Dongincheon-Yongsan) in Nov. 2007, respectively and, also expected the emitted $CO_2$ concentration by using a property of matter such as EMU (Electric Multiple Unit) design reviewing specification and air. According to the measured values, the concentration of PM10 was 44, 57, 45% and the concentration of $CO_2$ was 39, 36, 44% respectively, all measured values are within the guideline and also, as a result we found the expected value and measured value are similar.

• Journal of the Korean Society for Railway
• /
• v.18 no.6
• /
• pp.533-542
• /
• 2015

This paper suggest away to maintain constant power through trolley wire by transferring increased line voltage to the AC main line while changing the mode from Converter(Forward) to Inverter(Reverse) when the line voltage is increased due to regenerative power when the train stops, This paper suggests a Double Converter DC substation that can create regenerative power when the train stops reusable. We also proposed using a simulation tool, the optimal Thyrister firing angle that can minimize the undershoot and overshoot that occurs when transferring the mode from Converter to Inverter for quality improvement of DC voltage in the Double Converter in the DC substation from the Busan Urban Subway.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.3
• /
• pp.50-62
• /
• 2015

Recently, Subway Line No. 9, described as a 'hell-like' subway for its recorded load factor of max. 240% due to the opening of the 2nd phase extension section, has been causing problems of recurrent congestion in a subway station building. A recurrent congestion in the station building becomes a factor to offend rail users and to reduce the efficiency of railway management. This study aims to establish the methodology for effect evaluation of information provided to rail users, and conducts a gate metering case study considering the congested conditions at a platform among the methodologies for effect evaluation. The metering effect evaluation by load factor was conducted through selecting the micro simulation and pedestrian simulation tool grafting a gate metering. As a result, it was confirmed that, if gate metering is performed, the service level and pedestrian density of a platform by load factor would improve. In other words, if metering is conducted at a platform, it is possible to control the load factor in the waiting space of a platform. Therefore, it was judged through this study that it is possible to set up the index for effect evaluation of information provided to manage congestion of rail users, and establish the methodology for effect evaluation of information provided to rail users through a program.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.3
• /
• pp.471-477
• /
• 2013

We have studied on the possibility of precise positioning using hybrid Track Circuit system. Hybrid Track Circuit uses RFID which replaces UHF. Hybrid Track Circuit is a part of next generation railroad signal system which is available to communicate with a railway on board system based on a realtime operating system. If applicate on a current hand operating subway, phenomenon caused by driver's mistake such as passing a stop without stopping or mismatch error between PSD and train door should be prevented.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.257-262
• /
• 2012

The Ministry of Information-Communication assigned 18~19GHz frequency band for communication of cabins and platform to link between subway/train and it's station. In this paper, we propose wireless transmission devices which are 2 stage hybrid low noise amplifier of 18GHz band and mixer for 18GHz as well to apply for RF receiver. We designed LNA to be noise matched its 1st stage and gain matched for 2nd stage and mixer using $180^{\circ}$ hybrid coupler to suppress the spurious signal. The transistors of 18 GHz LNA and mixer are NE3210S01 of NEC and KMB-N51-1, respectively. As the result of simulation, we get 19.92dB gain and 2.06dB noise figure with LNA and 8.61dB conversion loss with mixer.

• The KIPS Transactions:PartC
• /
• v.18C no.1
• /
• pp.45-50
• /
• 2011

Due to advances in wireless communications and portable terminals, any-time, any-where, and any-device Internet access is possible. In particular, Internet access in moving vehicles is an emerging and challenging issue. Even though a variety studies have been conduced for vehicular networks, little attention is paid to vehicular Wi-Fi networks where a Wi-Fi access point (AP) is installed at the vehicle and the AP is connected to an external base station (BS). In this paper, we conduct a measurement study on the uplink and downlink throughput for Internet access in vehicular Wi-Fi networks. We consider diverse network environments: high-speed train, car, and subway. Measurement results demonstrate that current Internet access in vehicular Wi-Fi networks are not satisfactory for interactive multimedia applications. Therefore, in-depth study on resource management in vehicular Wi-Fi networks is strongly required.

• International Journal of Contents
• /
• v.7 no.1
• /
• pp.58-64
• /
• 2011

This paper is concerned with simulation exercises used to train key response agencies for crisis situations. While 'multi-agency' simulations are increasingly acknowledged as a necessary and significant training tool for emergency response organisations, many current crisis simulations are still focused on the revision of existing response plans only. However, a crisis requires a rapid reaction, yet in contrast to an 'emergency', the risks for critical decision makers in crisis situations are difficult to measure, owing to their ill-structure. In other words, a crisis situation is likely to create great uncertainty, unfamiliarity and complexity, and consequently should be managed by adaptive or second order expertise and techniques, rather than routine or structured responses. In this context, the paper attempts to prove that the current practices of simulation exercises might not be good enough for uncertain, unfamiliar, and complex 'crisis' situations, in particular, by conducting case studies of two different underground fire crises in Korea (Daegu Subway Fire 2003) and the UK (King's Cross Fire 1987). Finally, it is suggested that the three abilities: 'flexibility', 'improvisation' and 'creativity' are critical in responding to a crisis situation.