• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.585-592
• /
• 2000

Primary purpose of the system developed in this study is 3-D seismic data processing system for subsurface structure imaging and this system is developed in PC based on Linux for lower-cost computer. Basic data processing modules are originated from SU (Seismic Unix) which is widely used in 2-D seismic data processing and auxilious modules are developed for 3-D data processing. The system which is constructed by using these data processing modules is designed to GUI (Graphic User Interface) in order that one can easily control and for this purpose, GTK (Gimp Tool KiT) conventionally adapted in producing Linux application.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.449-454
• /
• 2003

The accurate mapping of the basement is one of the most crucial factors in construction of harbour facilities and bridges in the coastal areas. In shallow waters, the seismic reflection method often fails to image the basement geometry beneath the sediment cover in many cases. We present the result of a shallow marine seismic refraction survey using two ships, l2-channel hydrophone arrays deployed on the bottom and a borehole sparker or percussion powder as sources. Velocity structure could be computed by tomography algorithm since more than 6 different source points had been applied for one spread. The comparison of the results of the refraction survey with drilling logs demonstrates remarkable consistency in basement geometry. It thus appears that the refraction method in this study is an efficient and cost-effective way to investigate the basement structure in coastal area, river, and lake.

• 자원환경지질
• /
• 제32권2호
• /
• pp.161-167
• /
• 1999

Electric and electromagnetic surveys were conducted to investigate the deep structure of the Ulsan fault in Ipsil area, south of Kyeongju. On this study, especially high-frequency magnetotelluric method of electromagnetic survey in the frequency range of 10~100,000 Hz was mainly employed to study the deep subsurface configuration. High-frequency MT survey was performed at 70 points of spacing 30~50 m, making 3.8 km survey line. As a survey result, a 2-km-depth 2-D cross-section was achieved. It shows vertical and horizontal subsurface variations of resistivity values. Near-surface layer having low resistivity value becomes thicker eastward up to 800m. There is a steep low resistivity zone in the west side of survey line, and there exists two low resistivity zones dipping west in the east side of survey line. Two low resistivity zones are interpreted to be related to major movement pattern of the Ulsan fault. This suggests that major fault lines are developed on both peripheral sides of the broad fault zone.

• 자원환경지질
• /
• 제33권6호
• /
• pp.525-536
• /
• 2000

Electromagnetic and electric surveys were performed to reveal the deep structure of the Yangsan fault in the Bong-gye and Unyang areas, Kyeongnam Province, Korea. Especially, high-frequency magnetotelluric (HFMT) method of EM survey was mainly employed to study the deep subsurface configuration of Yangsan fault. HFMT survey was performed at 25 points of spacing 50 m, making 1.3 km survey line in Unyang area and 13 points of spacing 50 m, making 0.6 km survey line in Bong-gye area. Two 2-D cross-sections (Unyang and Bong-gye areas) were achieved as results. Electric survey by dipole-dipole array was performed to study the structure of shallow subsurface and compare the results with HFMT surveys. The results of HFMT and electric surveys show that Yangsan fault is a geologic boundary. It is very narrow and steep (about $80^{\circ}C$), and extends to 1~1.5 km depth.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.117-122
• /
• 2006

지하구조를 영상화하기 위한 물리탐사자료의 역산에서 가장 기본적인 가정 중의 하나는 자료측정 시간 동안에 지하구조가 변화하지 않는다는 정적인 지하구조 모형에 있으며, 시간의 흐름에 따른 지하구조 변화를 이해하기 위한 지구물리 모니터링 탐사자료의 역산에서도 통상적으로 받아 드려지고 있다. 그러나 투수성이 매우 높은 지하 매질에서 수행하는 염수 주입 실험의 경우에는 전도성 유체가 매우 빠른 속도로 이동하게 되므로, 측정시간 동안에 지하구조가 변화하지 않는다는 정적인 지하구조 모형의 가정은 성립되지 않은 경우가 많다. 또한 역산 결과 얻어지는 지하 영상에도 심한 왜곡이 게재될 가능성이 높음은 자명한 일이다. 이 연구에서는 이와 같은 문제를 해결하기 위하여 지하구조가 시간에 대해 연속적으로 변화하는 시공간 모델에 입각한 새로운 최소자승 역산법을 개발하였다. 지하 시공간 모델을 수많은 공간 모델로 일정한 시간간격으로 샘플링하는 대신에, 미리 설정한 수개의 기준 시각의 공간 모델로 정의하는 방법을 제안하였으며, 이를 위해 동일한 공간좌표에서의 물성은 시간에 대해 선형적으로 변화한다는 가정을 채택하였다. 이에 의해 시간에 따라 연속적으로 변화하는 지하의 시공간 모델을 구하는 문제는 수 개의 기준 공간 모델을 구하는 문제로 단순화될 수 있다. 역산의 안정성을 기하고 신뢰도가 높은 지하구조를 계산하기 위해, 인접한 시간대의 지하구조의 변화는 크지 않다는 시간축을 따른 제한 또한 도입하였다. 전기비저항 시추공간 토모그래피 탐사의 수치 실험을 수행하였으며 이를 통해 제안한 알고리듬의 효용성을 입증하였다.

• 자원환경지질
• /
• 제30권4호
• /
• pp.363-369
• /
• 1997

As a part of the study to know the deep geological structure of the Ogcheon Zone. gravity survey is performed along the survey line of which direction is roughly perpendicular to major faults of the Zone. Recent studies for petrology. geochemistry. and structural geology in south-western Ogcheon Zone are outlined. Raw gravity data are corrected to obtain Bouguer anomalies and the anomalies are interpreted to obtain subsurface structures along the survey line. The subterranean density discontinuities determined from the power spectrum method are appeared at depths of 15.4 km and 2.8 km. It is considered that the depth of 15.4 km indicates the boundary between upper and lower crust. Probably the depth of 2.8 km represents the boundary between upper volcanic formations and granites. Alternatively. the observed Bouguer anomalies are interpreted in terms of lateral density variation model. Finally. the subterranean geological structure to satisfy the Bouguer anomalies is presented through the iterative forward method in which results obtained from surface geological informations and from the inverse method are adopted as an initial model.

• 자원환경지질
• /
• 제21권2호
• /
• pp.131-137
• /
• 1988

Geological and electrical resistivity surveys were carried out to investigate subsurface geology and geologic structure of the Bonghwajae area in the Okchon zone. Pseudosections of the apparent electrical resistivity distribution along the three survey lines were obtained by using dipole-dipole electrode array method, and models of subsurface geology and geologic structure by using two dimensional finite difference method. The Bonghwajae fault zone exists around Bonghwajae area in the north-south direction, and is a boundary between Okchon Group and Choson Supper Group. Metabasite and hornblende gabbro intruded along the Bonghwajae fault zone remaining two fracture zones with low resistivity value of 20 ohm-m and widths of about 100m and 70-300m. They strike nearly N-S and dip westward with a high angle of $60-70^{\circ}$. Sochangri fault with a width of about 160m exists between Jisogori and Bonghwajae, by which Bonghwajae fault zone is displaced about 1km in the east-west direction. Hornblende gabbro whose electrical resistivity value is in the range of 5000-8000 ohm-m intruded the metabasite of 2000-4500 ohm-m after the Sochangri fault had formed. Great Limestone Group is widely distributed in the east of Bonghwajae fault zone, and interbeds so called Yongam formation of graphitic black slate with an extremely low electrical resistivity value of 2 ohm-m.

• 천문학회보
• /
• 제46권2호
• /
• pp.47.2-47.2
• /
• 2021

The present study is focused on origins of the flow and magnetic structure involved in the formation and eruption of a solar prominence. To clarify them, we performed an MHD simulation based on the 3-dimensional emerging flux tube (3DEFT) model, in which self-consistent evolution of a flow and magnetic field passing freely through the solar surface was obtained by seamlessly connecting subsurface dynamics with surface dynamics. By analyzing Lagrangian displacements of magnetized plasma elements, we demonstrate the flow structure which is naturally incorporated to the magnetic structure of the prominence formed via dynamic interaction between the flow and magnetic field.

• 지구물리
• /
• 제6권3호
• /
• pp.179-188
• /
• 2003

전기설비의 접지는 시설과 인명피해를 방지하기 위한 시설로서 고압전선의 지락사고시 대용량의 전류를 대지속으로 흘려보냄으로서 주변대지의 전위상승을 억제하는데 있다 이와 같은 위험전위는 접지계의 대지구조의 성분 및 균질성 지락전류의 크기 및 지속시간 인체의 전기적 특성 등과 같이 변수가 많아 해석이 매우 어렵다 최근 고장 전류 유입시 대지전위분포를 최대한 균일하게 하기위하여 접지저항을 낮추는 GPR(ground Potential Rise) 저감 방향으로 접지시스템 설계가 이루어졌으며 지상공간의 전위변동의 최소화 균등화함으로써 보안 및 기능 접지를 동시에 만족하는 접지시스템의 해석과 설계가 이루어지고 있다 본 연구에서는 전기비저항 탐사를 통해 밝혀진 지하의 대지비저항 분포를 통해 접지 설계를 수행한 사례를 보여준다

• 한국수자원학회논문집
• /
• 제34권4호
• /
• pp.403-411
• /
• 2001

본 연구에서는 지표하층과 암반층 사이의 지표하흐름을 기존 TOPMODEL의 구조에 연계시킨 수정 TOPMODEL의 국내 유역 적용성을 검증하였다. 지표하층에 존재하고 있는 대공극은 신속한 유출발생을 위한 수문경로를 제공하고 있으며, 수문감쇠곡선 분석을 위한 이중저류체계의 필요성을 의미한다. 설마천 유역을 대상으로 2개월간의 연속적인 유역수문거동을 모의한 결과 수정 TOPMODEL은 기존 TOPMODEL에 비해 유출발생과정을 모다 포괄적이고, 현실적으로 재현할 수 있는 것으로 밝혀졌다. Monte-Carlo 방법을 도입한 매개변수 산정결과도 수정 TOPMODEL의 경우가 물리적으로 타당한 것으로 밝혀졌다.