• Proceedings of the KIEE Conference
• /
• 2005.11c
• /
• pp.107-109
• /
• 2005

Temperature distribution measured to estimate condition of an electrical apparatus is an absolute reference for the apparatus conditions and the difference between the reference temperature and the current one. Because a passive thermography without the external thermal stimulation shows the difference in surface temperature between the object and back ground, the results can apply only to the estimation or the monitoring for the condition of terminal loose and the overload pertaining to the rise in temperature. However, a thermal flow in the active thermography is differently generated by the structure and condition of the surface and subsurface. This paper presents the nondestructive testing using the behavior and deals with the results by heat injection and cooling to the apparatus. The buried discontinuity of subsurface could be detected by these techniques.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.313-322
• /
• 2017

The purpose of this study is to estimate the surface and subsurface flows through the modelling of the model area and facility agricultural complex, and to calculate the groundwater recharge rate through water budget analysis. From results of surface flow modeling, the surface water is flowed to a depth of about 1 to 5 meters from the upper region (northeast) to the lower region (southeast) of the Miryang River. At the M01 point (upper), the observed surface water flux and the model surface water flux are consistent. At the M02 points (lower), the observed surface water flux and the model surface water flux are a difference of 1%. From results of subsurface flow modeling, the depth of groundwater is similar to elevation in the river and higher to the forest area. Ground water depth considering groundwater pumping is that the model values appears higher than the observed values to be within 1.5 m. From results of surface-subsurface integrated modeling, the groundwater recharge area is estimated about 90% of the model area, and the groundwater recharge rate is estimated $1.92{\times}10^5m^3/day$. From results of annual water budget analysis, the groundwater recharge rate per unit area is estimated to be 503.9 mm/year, and average annual rainfall is estimated at around 39%.

• Water for future
• /
• v.24 no.1
• /
• pp.109-117
• /
• 1991

The governing equation of flow in porous media is developed on the bases of the continuity equation of fluid for transient flow through a saturated-unsaturated zone, and substitution of Darcy's law. The numerical solutions are obtained by finite element method based on the Galerkin principles weighted residuals. The analysis are carried out by using the unsteady storm data observed and rainfall intensities which are obtained by using the rainfall excess model in considering of the initial losses. The functional relationships between the hydraulic conductivity, capillary pressure head and volumetric water content are applied to the flow of water through unsaturated soil varied with changes of water content.

• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.33-40
• /
• 2004

Numerical and laboratory studies have been conducted to test the ability of Electrical Resistance Tomography-a technique used to map the electrical resistivity of the subsurface-to delineate contaminant plumes. Two-dimensional numerical models were created to investigate survey design and resolution. Optimal survey design consisted of both downhole and surface electrode sites. Resolution models revealed that while the bulk fluid flow could be outlined, small-scale fingering effects could not be delineated. Laboratory experiments were conducted in a narrow glass tank to validate theoretical models. A visual comparison of fluid flow with ERT images also showed that, while the bulk fluid flow could be seen in most instances, fine-scale effects were indeterminate.

• Ocean and Polar Research
• /
• v.21 no.2
• /
• pp.87-97
• /
• 1999

To estimate absolute transports by advection in the southwestern East Sea (Japan Sea), an inverse method was applied to CTD data obtained in July 1993. The relative velocities are calculated using the thermal wind equation. The inverse model was formulated to obtain a reference velocity based on the mass conservation in each of four vertical layers within a region enclosed by hydrographic sections and the coastal boundary. The flow patterns in the surface layer are clockwise and anti-clockwise in the regions south and northwest of Ulleung Island, respectively, and a strong northward flow appears in between them. In the second layer, the flow fields are generally weak. The inverse calculation yields the southward flow along the coast, and this suggests that the subsurface low salinity water in the Ulleung Basin is supplied by the southward transport along the east coast of Korea.

• Journal of Korea Water Resources Association
• /
• v.30 no.5
• /
• pp.539-548
• /
• 1997

A physically based model for rainfall runoff simulation in agricultural watershed equipped with tile drains is presented. This model is developed from the TOPMODEL which is based on the detailed topographic information provided by Digital Elevation Model (DEM). Nine possible flow generation scenarios in the tile drained basin are suggested and used in the development of the model. The model can identify the portions of the hydrograph resulting from tile flow, subsurface flow and surface flow. The performance of the model is assessed through a calibration and validation process. The results of the analysis show that the model describes the physical system well and provides a better insight into the hillslope hydrology of agricultural watersheds with tile drainage.

• Ecology and Resilient Infrastructure
• /
• v.4 no.3
• /
• pp.142-148
• /
• 2017

Nitrogen and phosphorus are key factors in causing eutrophication of water body. In this study, ceramics media was selected to increase the removal efficiency of nitrogen and phosphorus. We designed vertical, horizontal flow constructed wetlands to create aerobic and anaerobic flow conditions by using the media, then proceeded to performance evaluations after acrylic reactors were produced. In the case of vertical and horizontal flow constructed wetlands, we measured oxygen concentrations to evaluate aerobic and anaerobic conditions. we got the result of 2.7 mg/L in the aerobic condition, N.D in the anaerobic condition respectively, which suited our purpose. The result of the combined vertical and horizontal flow condition showed that the removal efficiency of SS was 94%, 91%, 61% at 140 min, 80 min, 60 min of running times, respectively, and the removal efficiency of T-P was 84%, 71%, 63% during each running time. In case of T-N, the removal efficiency was 63%, 49%, 42% during each running time. We found that the reactor exerted better removal efficiency when in the short time compared to 12 - 24 hr residence time of existing wetlands. In this study, we conducted experiments to explore functional effects after applying combined vertical and horizontal flow methods in the field. Further study will be carried out to identify its mechanism and administrative perspective.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.6
• /
• pp.106-117
• /
• 2021

The purpose of this study is prediction of landslide occurrence reflecting the subsurface flow characteristics within the soil layer in the future due to climate change in a large scale watershed. To do this, we considered the infinite slope stability theory to evaluate the landslide occurrence with predicted soil moisture content by SWAT model based on monitored data (rainfall-soil moisture-discharge). The correlation between the SWAT model and the monitoring data was performed using the coefficient of determination (R²) and the model's efficiency index (Nash and Sutcliffe model efficiency; NSE) and, an accuracy analysis of landslide prediction was performed using auROC (area under Receiver Operating Curve) analysis. In results comparing with the calculated discharge-soil moisture content by SWAT model vs. actual observation data, R² was 0.9 and NSE was 0.91 in discharge and, R² was 0.7 and NSE was 0.79 in soil moisture, respectively. As a result of performing infinite slope stability analysis in the area where landslides occurred in the past based on simulated data (SWAT analysis result of 0.7~0.8), AuROC showed 0.98, indicating that the suggested prediction method was resonable. Based on this, as a result of predicting the characteristics of landslide occurrence by 2050 using climate change scenario (RCP 8.5) data, it was calculated that four landslides could occur with a soil moisture content of more than 75% and rainfall over 250 mm/day during simulation. Although this study needs to be evaluated in various regions because of a case study, it was possible to determine the possibility of prediction through modeling of subsurface flow mechanism, one of the most important attributes in landslide occurrence.

• Water for future
• /
• v.29 no.6
• /
• pp.203-215
• /
• 1996

A physically based model for rainfall-runoff simulation in agricultural watersheds equipped with tile drains is developed from the TOPMODEL framework. The model is based on detailed topographical information provided by the Digital Elevation Model (DEM), which is available in the Geographic Information System GRASS. Nine possible flow generation scenarions are suggested and used in the development of the model. The storage and delaying effects in the soil matrix and in the tile system are simulated with a second order linear reservoir. The model can identify the portions of the hydrators resulting from tile flow, subsurface flow and surface runoff.

• 한국해양학회지
• /
• v.8 no.1
• /
• pp.4-8
• /
• 1973

Recent dynamic computations of zonal flow and analysis of oceanographic data of CSK in winter indicate year-to year variations in the location and dynmic structure of the Subtropic Countercurrent in the western North Pacific. In January 1966, the Subtropical Countercurrent migrated southward to 21$^{\circ}$- 22$^{\circ}$N Lat in association with the subsurface Subtropical Convergence. At the area of 25$^{\circ}$- 26$^{\circ}$N Lat, another surface thermal front was formed along which a stronger eastward flow of approximately 0.4kt is seen. On the section of 142$^{\circ}$E Long in January 1967, eastward flow appears at every interval of 2$^{\circ}$latitude in the northern waters of 20$^{\circ}$N Lat.