• Korean Journal of Agricultural Science
• /
• v.37 no.2
• /
• pp.191-197
• /
• 2010

The objective of this research was to determine the influence of the physical and chemical properties of root substrates used during the production of 'Maehyang' strawberry propaguleson the growth of the mother plants and the rate of daughter plant formation. Plants were cultured in plastic bags containing six different formulations of root substrates composed of: a) 50% coir dust and 50% perlite (5:5 by volume, A), b) 60% coir dust and 40% perlite (6:4, B), c) 70% coir dust and 30% perlite (7:3, C), d) 70% coir dust and 30% coconut chip (7:3 D), e) 60% coir dust and 40% coconut chip (60:40, E), or f) 50% sphagnum peat and 50% vermiculite (50:50, F). All media formulations contained a moderate level of base fertilizers. Physical and chemical properties of each formulation were determined before plant establishment and after 120 days of stock plant culture and runner production. Total porosity (TP) and container capacity (CC) of all substrate formulations were higher than 85% and 55%, respectively, allowing a suitable range of air and water holding characteristics. Formulation F provided the highest TP and CC values among the all substrate modifications evaluated. Substrate formulations A, B, C and F had higher electrical conductivity (EC) and $NO_3{^-}$-N concentrations than formulations D and E, when determined before and after plant culture. Formulations A, B, C, and F, having higher EC readings, also performed better as root substrates thanthe formulations D and E in increasing fresh and dry weights of the runners as well as the production of daughter plants per plant. The 'Maehyang' strawberry plants grown in the formulation F had the highest tissue N content, followed by those grown in substrate B, A, C, or D for 120 days after transplanting. Formulation F also facilitated accumulation of higher tissue phosphorus (P) and copper (Cu) contents compared to other treatments. Results of this experiment suggest that the chemical properties, rather than physical properties, of root substrates had a major influence on the growth of mother plants and the occurrence of healthy daughter plants during the bag-culture phase of propagation.

• The Korean Journal of Mycology
• /
• v.31 no.3
• /
• pp.200-205
• /
• 2003

The study was carried out on the artificial cultivation of the abalone mushroom, Pleurotus cystidiosus O.K.Miller. The pine sawdust substrates with 20% rise bran were good for mycelial growth and high quantity of P. cystidiosus in the bottle cultivation. Moreover, the proper volume for bottle cultivation was 850 ml and the removal of spawn and surface layer of the medium before pin-heading was more efficient. The yields of P. cystidiosus were higher in sawdust substrates added calcium carbonate than those not added calcium carbonate. The volume of 3 kg polypropylene bag is good for yield and biological efficiency in bag cultivation of P. cystidiosus. Cotton wastes were proper substrates for bag cultivation. In the effect of different cultivation temperature, $28{\pm}2^{\circ}C$ cultivation temperature was good for for primordial formation after inoculation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.392-399
• /
• 2007

This study was carried out to assess optimum conditions of peatmoss-based substrates for red pepper plug seedlings. Peatmoss-based substrates prepared by mixing of peatmoss with vermiculite, perlite, rice hull and zeolite at various mixing ratios were used for growing pepper plug seedlings. The physical and chemical properties of the peatmoss substrate were analyzed by the CEN(European committee for standardization) method. Fresh and dry weights (shoot, root), leaf area, root length and T/R ratio (dry shoot weight/dry root weight) were determined at 55 days after sowing. The results showed that the growing media PVSZ 6 (peatmoss:silver vermiculite: zeolite=6:3.9:0.1) and PVGZ 6 (peatmoss:gold vermiculite: zeolite=6:3.9:0.1) can successfully be used for red pepper plug seedlings judging from dry weight and T/R ratio of the plug seedlings. The optimal ranges of total pore space, water volume, air volume, easily available water content and water buffering capacity of the peatmoss based growing media for pepper plug seedlings were 87~93%, 52~71%, 20~41%, 10~37% and 0.6~10%, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.207-207
• /
• 2008

Modern industry has focused on processing that produce low- loss dielectric substrates used complex micron-sized devices using tick film technologies such as tape casting and slip casting. However, these processes have inherent disadvantages fabricating high density interconnect with embedded passives for high speed communication electronic devices. Here, we have successfully fabricated porous alumina dielectric layer infiltrated with polymer solution by using inkjet printing process. Alumina suspensions were formulated as dielectric ink that were optimized to use in inkjet process. The layer was confirmed by field emission scanning electron microscope (FE-SEM) for measuring microstructure and volume fraction. In addition, the reaction kinetics and electrical properties were characterized by FT-IR and the impedance analyzer. The volume fraction of alumina in porous dielectric alumina layer is around 70% much higher than that in the conventional process. Furthermore, after infiltration on the dielectric layer using polymer resins such as cyanate ester. Excellent Q factors of the dielectric is about 200 when confirmed by impedance analyzer without any high temperature process.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.3
• /
• pp.53-58
• /
• 2002

This paper was performed to investigate the effect of pore structure on ink residual behavior. To prepare different coating structures as substrates against inks, fine, medium and coarse calcium carbonate were used in the coating color. It is well known ink properties can affect to print qualities. After printing on the coated paper, ink layer can consider as third structure addition to paper and coating layer. To compare effect of ink properties on the surface structure and print qualities, several properties of ink were also adopted as raw material. Particle size of pigment effect on gloss evaluation of coated paper increased with calendering. It was shown that ink transfer rate increased as surface of the sample was smooth. The ink contained low viscosity resin evaluated more print gloss. Finer pigment particle size, smaller pore size and higher porosity. Pore volume of coated paper was slightly decreased with printing as the coating was prepared with the finest particle size. However, it founded that ink resin could not affect on pore volume and distribution of printed paper

• Korean Journal of Crystallography
• /
• v.7 no.2
• /
• pp.120-125
• /
• 1996

Single crystals of deoxy-thymidine diphosphate-D-gluxose-4,6-dehydratase(abbreviated as dTDP-D-glucose dehydratase) from Escherichia coli Strain BL21 clone which harbors the gene of dTDP-D-glucose dehydratase in Salmonella typhimurium LT2 have been grown with and whithout substrates by sitting drop vapor diffusion at room temperature. The precipitating agent was 1.6 to 2.0 M Na, K phosphate buffer(pH 8.0). The crystals diffract to at least 2.5Å and belong to the hexagonal space group P61 with cell dimensions a=b=168.54Å, c=81.08Å. The asymmetric unit contains one dimer with a crystal volume per protein mass(VM) of 2.4Å3/Da and solvent content (Vsol) of 64% by volume.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.248-255
• /
• 2013

This study examined an automated irrigation technique by a frequency domain reflectometry (FDR) sensor for scheduling irrigation for tomato (Solanum lycopersicum L. 'Starbuck F1') cultivation aimed at avoiding effluent from an open hydroponic system with coir substrate containing different ratios of chip-to-dust (v/v) content. Specifically, the objectives were to undertake preliminary measurements of irrigation volumes, leachate volume, volumetric water content and electrical conductivity (EC) in the substrate, plant growth, fruit yield, and water use efficiency resulting from variation in chip content as an initial experiment. Commercial coir substrates containing different percentages of chips and dust (0 and 100%, 30 and 70%, 50 and 50%, or 70 and 30%), two-story coir substrates with different percentages of chips in the lower layer and dust in the upper layer (15 and 85%, 25 and 75%, or 35 and 65%), or rockwool slabs were used. The results showed that a negligible or no leachate was found for all treatments when plants were grown under a technique for scheduling non-drainage irrigation using a frequency domain reflectometry (FDR) sensor. Daily irrigation volume was affected by chip content in both commercial and two-story slabs. The highest plant growth, marketable fruit weight, and water-use efficiency were observed in the plants grown in the commercial coir slab containing 0% chips and 100% dust, indicating that the FDR sensor-auto-mated irrigation may be more useful for tomato cultivation in coir substrate containing 0% chips and 100% dust using water efficiently and minimizing or avoiding leachate and thus increasing yield and reducing pollution. Detailed experiment is necessary to closely focus on determining appropriate irrigation volume at each of irrigation as well as duration of each individual irrigation cycle depending on different physical properties of substrates using an automated irrigation system operated by the FDR sensor.

• Korean Journal of Agricultural Science
• /
• v.37 no.2
• /
• pp.199-207
• /
• 2010

This research was conducted to determine the influence of physiological and chemical properties of root substrates on the growth of the daughter plants of 'Maehyang' strawberry produced by bag culture. The daughter plants produced by stock plants during bag culture were individually separated and grown in 10-cm diameter plastic pots containing six different formulations of root substrates: a) 50% peatmoss plus 50% vermiculite (5:5 by volume, A), b) 70% peatmoss plus 30% perlite (7:3, B), c) 70% coir dust plus 30% perlite (7:3, C), d) mixture of 35% coir dust, 35% peatmoss, and 30% perlite (3.5:3.5:3.0, D), e) mixture of 20% rice hull, 70% coir dust, and 10% perlite (2:7:1, E), and f) 30% rice hull plus 70% coir dust (30:70, F). The container capacity and air filled porosity of the growing medium varied greatly among the six substrate formulations evaluated. The substrates E and F had less container capacity and higher air-holding spaces than the rest of the formulations. Therefore, these two formulations (E and F) may cause a problem in water management during the production of healthy daughter plants. The substrate formulations A, B, and D retained higher nitrogen (N) concentrations than other formulations containing coir dust or rice hull. The substrate formulations E and F which contained rice hull had lower N, phosphorus (P), and potassium(K) concentrations than other substrate formulations containing coir. The quality of the daughter plants grown in all six different substrate formulations was good with the crown diameters at around 10 mm. Fresh weights of the daughter plants grown in substrate formulations A, C, and D were higher than those obtained from B, E, and F. Dry weights of the daughter plants showed a similar trend. The daughter plants having high fresh and dry weights and increased crown diameter are in demand by the industry. For this reason, the substrate formulations A, C and D can readily be used as potting mixes during the production of 'Maehyang' strawberry transplants utilizing the bag culture system.

• The Korean Journal of Mycology
• /
• v.4 no.1
• /
• pp.31-44
• /
• 1976

The studies were carried out to examine the effects of supplementation of nutritional substances and physical conditions in substrate on the mycelial growth and yield of fresh sporophores of winter mushroom, Flammulina velutipes(Curt. ex Fr.) Sing. and to obtain further informations on the nutritional requirements of the fungus with reference to improvement of substrate through [analysis of chemical composition of the substrates during the cultivation period. The results obtained are summarized as follows: 1. The best yield of fresh sporophores, 84.4 g per 280 g substrate in a bottle, was obtained from the mixture of poplar sawdust 10 and rice bran 3 by volume when Flammulina velutipes was cultivated on the poplar sawdust supplemented by rice bran, wheat bran, cattle manure and various combinations of these materials as nutrient sources. The substrates of poplar sawdust 10 plus rice bran 3 and 2 or wheat bran 3 with a higher yield of fresh sporophores showed a comparatively higher content of total nitrogen. total sugar, and potassium. 2. The mycelial growth of the fungus was compared on the substrates of poplar sawdust supplemented by the several nutrient sources and poplar sawdust alone. The fastest linear growth occurred on substrates of poplar sawdust alone and poplar sawdust plus cattle manure deficient in sugar and nitrogen sources, but mycelial density was more sparse on the substrates. Also, growth in a solution extracted from these substrates was very meager. 3. In the substrates which varied with bulk density and moisture content optimum bulk density and moisture content for mycelial growth was 0.2g/cc and 72% on a dry weight basis, respectively, but the highest yield of fresh sporophores was obtained at the bulk density of 0.3g/cc and moisture content of 67%. 4. By increasing the ratio of rice bran in poplar sawdust the loss of total weight and ash, content at each stage was increased, and during the cultivation period of 75 days, loss of total weight of the substrates at inoculation was 17.8 to 28.8% and ash content increased about 12%. 5. 11 to 14% of the cellulose and 3 to 4% of the lignin content per original substrate were decreased without a great difference depending of the mixing ratio of rice bran. The soluble glucose concentration in the substrates was increased during the same period. 6. In the process of vegetative and reproductive growth of the fungus upon the substrates, the total nitrogen was increased in quantity per dry weight of sample but was reduced in absolute quantity to a minute extent. There is no great changes in content of organic nitrogen including amino acid nitrogen, and hydrolysable ammonium nitrogen during the vegetative growth period, but occurrence of sporophores resulted in a decrease in the nitrogen content of these forms. On the one hand, by an increase of additive amounts of rice bran, nitrogen contents of these forms were higher and the reduction range during the reproductive growth period became wider. 7. Mycelial growth of the fungus was accelerated in various liquid media supplemented with organic nitrogen sources such as peptone and yeast extract in comparison with addition of inorganic nitrogen sources. Furthermore, mycelial growth was mere vigorous in the media with higher content of organic nitrogen sources.

• Advances in environmental research
• /
• v.10 no.1
• /
• pp.87-103
• /
• 2021

Anaerobic digestion (AD) refers to the biological process which can convert organic substrates to biogas in the absence of oxygen. The aim of this study was to determine the capability of feedstock to produce biogas and to quantify the biogas yield from different feedstocks. A co-digestion approach was carried out in a continuous stirred tank reactor operated under mesophilic conditions and at a constant organic loading rate of 0.0756 g COD/ L.day, with a hydraulic retention time of 25 days. For comparison, mono-digestion was also included in the experimental work. 2 L working volumes were used throughout the experimental work. The seed culture was obtained from composting as substrate digestion. When the feedstock was added to seeding, the biogas started to emit after three days of retention time. The highest volume of biogas was observed when the seeding volume used for 1000mL. However, the lowest volume of biogas yield was obtained from both co-digestion reactors, with a value of 340 mL. For methane yield, the highest methane production rate was 0.16 L CH4/mg. The COD with yield was at 8.6% and the lowest was at 0.5%. The highest quantity of methane was obtained from a reactor of Euphorbiaceae peel with added seeding, while the lowest methane yield came from a reactor of Euphorbiaceae stems with added seeding. In this study, sodium bicarbonate (NaHCO3) was used as a buffering solution to correct the pH in the reactor if the reactor condition was found to be in a souring or acidic condition.