• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.278-279
• /
• 2005

The crystallization of FePt/MgO(100) magnetic thin films of various thicknesses has been studied using synchrotron x-ray scattering, atomic force microscope, and vibrating sample magnetometer. In film with a 500-${\AA}$-thick, ordered (fct) FePt phase was dominantly crystallized into perpendicular (001) grains keeping the magnetically easy c-axis normal to the film plane during annealing. In film with a 812-${\AA}$-thick, however, longitudinal (110) grains keeping the c-axis parallel to the film plane were grown on top of the perpendicular (001) grains. The behavior of the magnetic properties was consistent with the thickness dependence of the crystallization. We attribute the thickness dependence of the crystallization to the substrate effect, which prefers the growth of the c-axis oriented perpendicular grains near the film/substrate interfacial area.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2003.08a
• /
• pp.76-76
• /
• 2003

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.3-3
• /
• 1996

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.578-579
• /
• 2000

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.616-621
• /
• 2010

New type of the base material of the light-emitting diode requires copper wafer in view of heat and electrical conductance. Therefore, polishing process of the substrate level is needed to get a nanometer level of surface roughness as compared with pattern structure of nano-size in the semiconductor industry. In this paper, a series of lapping and polishing technique is shown for the rough and deflected copper substrate of thickness 3mm. Lapping by sand papers tried air cooling method. And two steps of polishing used the diamond abrasives and the $Al_2O_3$ slurry of size 100mm considering the residual scratch. White-light interferometer proved successfully a mirror-like surface roughness of Ra 6nm on the area of $0.56mm{\times}0.42mm$.

• Journal of Mechanical Science and Technology
• /
• v.18 no.4
• /
• pp.622-629
• /
• 2004

In this paper, effects of elastic energy of magnetostrictive film on the deflection of a cantilevered film-substrate system are investigated. The total energy including the elastic energy of magnetostrictive film is formulated. And it is minimized to give the curvatures and the position of neutral axis of the cantilevered system. To discuss the effects of the elastic energy of film in a measured system, three magnetostrictive unimorph cantilevers and a bimorph cantilever reported elsewhere are reviewed. It is shown that the assumption, since the thickness of film is much smaller than that of substrate the film elastic energy is negligible, can cause considerable error in evaluating magnetostrictive coefficients. Not the ratio of thicknesses but elastic energies between film and substrate is also shown to play important role in making decision whether the assumption is valid or not.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.366-369
• /
• 2002

Subsurface biobarrier technology has potential applications to contain contaminated groundwater and/or to degrade toxic pollutants in groundwater. Most biobarrier studies were conducted under aerobic condition, however there were several obstacles to make aerobic condition. Thus, In this study, we examined biobarrier formation under denitrifying condition by using nitrate as an electron acceptor. Experiments were performed with a sand column inoculated with activated sludge from the nearby WWTP. The substrate medium was pumped to the sand column in an upflow mode. During the low substrate loading rate period, the extent of reduction rate in hydraulic conductivity was found similar throughout the column, and permeability became relatively stable after couple of days. However, during the high substrate loading rate period, the column demonstrated a gradient of permeability reduction, with the greatest reduction in sections nearest the column inlet. Rapid growth of microorganisms near the column inlet resulted in the unbalanced reduction of hydraulic conductivity throughout the sand column. As a result, at this denitrifying condition the thickness of biobarrier could be controlled by adjusting the medium conditions of microbial growth.

• Journal of Information Display
• /
• v.10 no.2
• /
• pp.68-71
• /
• 2009

A replica-molding method of fabricating a dual-gap substrate for transflective liquid crystal (LC) displays is demonstrated. The dual-gap substrate provides homeotropic alignment for the LC molecules without any surface treatment and embedded bilevel microstructure on one of the two surfaces to maintain different cell gaps between the transmissive and reflective subpixels. The proposed transflective LC cell shows no electro-optic disparity between two subpixels and reduces the panel thickness and weight by 30% compared to the conventional transflective LC cell, which has two glass substrates.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.79-80
• /
• 2006

In order to raise productivity of the OLED and realization of the OLED TV, it is required to improve the design of the board size glass panel. The large-size glass substrate has some difficulties regarding its deflection during handling operation due to its small thickness (0.7t) which is not even enough to stand its mass itself. This paper is demonstrating a new solution of this difficult through clamping and bending end condition, which helps to minimize the deflection of the glass substrate.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.4
• /
• pp.170-173
• /
• 2007

Organic field-effect transistors (OFETs) are of interest for use in widely area electronic applications. We fabricated the organic field-effect transistor based a copper phthalocyanine (CuPc) as an active layer on the silicon substrate. The CuPc FET device was made a topcontact type and the substrate temperature was room temperature and $150^{\circ}C$. The CuPc thickness was 40 nm, and the channel length was $50{\mu}m$, channel width was 3 mm. We observed the typical current-voltage (I-V) characteristics and capacitance-voltage (C-V) in CuPc FET and we calculated the effective mobility with each device. Also, we observed the AFM images with different substrate temperature.