• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.292-300
• /
• 1997

In this study PZT powders were prepared with shapes of cubic by hydrothermal synthesis with various starting materials, and the sintering characteristics of the powders were investigated. The particle shapes were cubic regardless of starting materials, but the mean size of particles formed using $Pb(NO_3)_2$, $Ti(OC_4H_9)_4$ and $Zr(OC_4H_9)_4$ was relatively smaller than that of particles prepared from other starting materials. Agitation of the feedstock during hydrothermal reaction results in decreasing the required reaction temperature for the formation of nuclei, and in increasing the size of product particles. XRD results showed that the major phase of PZT crystal powders was a tetragonal phase at the Zr to Ti ratio of 40 to 60, or a rhombohedral phase at its ratio of 60 to 40. The density of a sintered body made from the hydrothermal powders in PbO surrounding varied with sintering temperatures and with periods of sintering time. The experimental results also showed that the optimum sintering condition was at $1150^{\circ}C$ for a 2hr sintering, and that the density of a sintered body was $7.6g/cm^3$.

• Journal of Mushroom
• /
• v.13 no.3
• /
• pp.223-227
• /
• 2015

The study was conducted to investigate the effects of post-incubation period and temperature treatment conditions during incubation on the uniform primordia formation and cultural characteristics of oyster mushroom (Pleurotus ostreatus). Three kinds post-incubation period; 25, 30, 35 days and control were applied for 30 days while two kinds incubation room temperature $23^{\circ}C$ and $26^{\circ}C$ and control were used $20^{\circ}C$. The substrate temperature during pre-incubation was of 'Suhan No. 1' and 'Gonji No. 7'. Oyster mushroom varieties tended to increase between $24^{\circ}C$ to $26^{\circ}C$ at 11 to 15 days after inoculation and then they were maintained in treatment temperature during post -incubation period. The $CO_2$ occurrence was at the highest at 6,500 ppm for 'Suhan No. 1' and 5,800 ppm for 'Gonji No. 7' at the time of the highest temperature increase. The ratio of un-uniformal primordia formation and the ratio of non-commercial fruit body were reduced by 40%, 10.5%, respectively compared to control for 'Suhan No. 1' when in the post-incubation temperature was $26^{\circ}C$, and incubated for 10 days and 15 days treatment. Also, 'Gonji No. 7' was reduced by 19%, 9.5%, respectively when in the post-incubation temperature was $26^{\circ}C$, and incubated for 10 days treatment. Therefore, the higher post-incubation temperature of room and longer post-incubation period resulted in the higher percentage of primordia formation of two cultivars.

• Molecular & Cellular Toxicology
• /
• v.4 no.4
• /
• pp.348-354
• /
• 2008

Bisphenol A (BPA), an environmental endocrine disrupter, enters the human body continuously in food and drink. Young children are likely to be more vulnerable than adults to chemical exposure due to the immaturities of their organ systems, rapid physical development, and higher ventilation, metabolic rates, and activity levels. The direct effect of BPA on peripheral tissue might also be of importance to the development of insulin resistance. However, the influence that BPA has on insulin signaling molecules in skeletal muscle has not been previously investigated. In this study, we examined the effect of BPA on fasting blood glucose (FBG) in post-weaned Wistar rats and on insulin signaling proteins in C2C12 skeletal muscle cells. Subsequently, we investigated the effects of BPA on insulin-mediated Akt phosphorylation in C2C12 myotubes. In rats, BPA treatment (0.1-1,000 ng/mL for 24 hours) resulted in the increase of FBG and plasma insulin levels, and reduced insulin-mediated Akt phosphorylation. Furthermore, the mRNA expression of insulin receptor (IR) was decreased after 24 hours of BPA treatment in C2C12 cells in a dose-dependent manner, whereas the mRNA levels of other insulin signaling proteins, including insulin receptor substrate-1 (IRS-1) and 5'-AMP-dependent protein kinase (AMPK), were unaffected. Treatment with BPA increased GLUT4 expression and protein tyrosine phosphatase 1B (PTP1B) activity in C2C12 myotubes, but not in protein levels. We conclude that exposure to BPA can induce insulin resistance by decreasing IR gene expression, which is followed by a decrease in insulin- mediated Akt activation and increased PTP1B activity.

• Korean Journal of Materials Research
• /
• v.10 no.6
• /
• pp.437-444
• /
• 2000

We investigated the effect of substrate temperature, chemical composition and post-deposition heat-treatment on the crystal structure and electrical transport of $La_{1-x}Sr_xMnO_{3-{\delta}}$(0.19${\leq}x{\leq}$0.31) thin films. As-prepared $La_{1-x}Sr_xMnO_{3-{\delta}}$ films grown at $500^{\circ}C$ by sputter techniques were found to have the pseudo-tetragonal system(a/c=0.97) and a highly preferential <001> orientation. The films were changed to be of the cubic system by post-deposition annealing at around $900^{\circ}C$. A main target of $La_{0.67}Sr_{0.33}MnO_3$ as well as auxliary targets of $La_{0.3}Sr_{0.7}MnO_3$ ceramics were co-sputtered to control the chemical composition of the film. The Sr content(x) of the film ranged from 0.19 to 0.31, depending on the number of the auxiliary target. When x increased from 0.19 to 0.31, the electrical resistivity of the film decreased and the transition temperature between metal and semiconductor shifted to higher temperature. With a magnetic field of 0.18 T, the magneto-resistance ratio (MR(%) = (${\rho}_o-{\rho}_H/{\rho}_H$) of the $La_{0.69}Sr_{0.31}MnO_3$ thin film was about 390%.

• Applied Biological Chemistry
• /
• v.47 no.4
• /
• pp.379-383
• /
• 2004

For the elucidation of substrate specificity to the brown copra meal by Bacillus sp. ${\beta}-mannanase.$, the enzymatic hydrolysate after 24 hr of reaction was heated in a boiling water bath for 10 min, and then centrifuged to remove the insoluble materials from hydrolysates. The major hydrolysates composed of D.P 5 and 7 galactosyl mannooligosaccharides. For the separate of galactosyl mannooligosaccharides, the supernatant solution of 150 ml was put on a first activated carbon column. The column was then washed with 5 l of water to remove mannose and salts. The oligosaccharides in the column were eluted by a liner gradient of $0{\sim}30%$ ethanol, at the flow rate of 250 ml per hour. The sugar composition in each fraction tubes was examined by TLC and FACE analysis. The combined fraction from F3 was concentrated to 30 ml by vacuum evaporator. Then put on a second activated carbon column. The oligosaccharides in the column were eluted by a liner gradient of $0{\sim}30%$ ethanol (total volume: 5 l), at the flow rate of 250 ml per hour. The eluent was collected in 8 ml fraction tubes, and the total sugar concentration was measured by method of phenol-sulfuric acid. The major component of F2 separated by 2nd activated carbon column chromatography were identified $Gal^3Man_4(6^3-mono-{\alpha}-D-galactopyranosyl-{\beta}-mannotetraose)$. To investigate the effects of brown copra meal galactomannooligosaccharides on growth of Bifidobacterium longum, B. bifidum were cultivated individually on the modified-MRS medium containing carbon source such as $Gal^3Man_4$, compared to those of standard MRS medium.

• Ecology and Resilient Infrastructure
• /
• v.2 no.1
• /
• pp.22-32
• /
• 2015

This study investigated the difference in fish community structures in a main channel and an isolated former channel, considering the environmental factors in the Mangyeong River, Korea. Principal component analysis (PCA) with environmental factors showed that former channels were composed of a fine substrate covered by in-stream vegetation, whereas the main channel was covered by a wide range of substrates with a higher dissolved oxygen and conductivity. The result of the hierarchical cluster analysis with species abundance delineated to the four main groups; three abandoned channel groups and one main channel group. Non-metric multidimensional scaling (NMDS) showed that fish community structures of each study site differed from environmental factors: former channel fish communities were positively related to in-stream vegetation cover, whereas main channel fish communities were positively associated with dissolved oxygen and conductivity. The results indicated that channelization, where there was a separation between the former channel and the main channel, had detrimental effects on fish community structures of both the main channel and the abandoned channel in the Mangyeong River. In conclusion, this study suggested that the connectivity between the main channel and abandoned channel were required to enhance both habitat structural diversity and species diversity of the Mangyeong River.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.115-123
• /
• 1999

A micro-gas sensor with heater and sensing electrode on the same plane was fabricated on phosphosilicate glass(PSG, 800nm)/$Si_3N_4$ (150nm) dielectric membrane. PSG film was provided by atmospheric pressure chemical vapor deposition(APCVD), and $Si_3N_4$ film by low pressure chemical vapor deposition (LPCVD). Total area of the fabricated device was $3.78{\times}3.78mm^2$. The area of diaphragm was $1.5{\times}1.5mm^2$, and that of the sensing layer was $0.24{\times}0.24mm^2$. Finite-element simulation was employed to estimate temperature distribution for a square-shaped diaphragm. The power consumption of Pt heater was about 85mW at $350^{\circ}C$. Tin thin films were deposited on the silicon substrate by thermal evaporation at room temperature and $232^{\circ}C$, and tin oxide films($SnO_2$) were prepared by thermal oxidation of the metallic tin films at $650^{\circ}C$ for 3 hours in oxygen ambient. The film analyses were carried out by SEM and XRD techniques. Effects of humidity and ambient temperature on the resistance of the sensing layer were found to be negligible. The fabricated micro-gas sensor exhibited high sensitivity to butane gas.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.491-496
• /
• 1998

The composition of isocyanates and polyols influence prepolymeric properties of adhesive and calking sealant based on polyurethanes (PU). One component moisture curing prepolymers, which reacted with surface humidity of substrate, were synthesized in several kinds of composition. Reactivity, structural change and properties of the prepolymers were studied as a preliminary step to manufacture PU based adhesive and sealant. To study the effects of mole ratio ([NCO]/[OH]), we used toluene diisocyanate (TDI), 4, 4'-diphenylmethane diisocyanate (MDI), and ether-polyols such as PTMG and PPG which have good resistance to hydrolysis and excellent low-temperature properties. The each prepolymers could be prepared in different molecular weight without any significant structural change. The mole ratio 1.78 of [NCO] to [OH] showed the fastest reactivity. It was confirmed that effect of polyols was larger than that of isocyanates on the prepolymer in reactivity. Several kinds of compounds were manufactured with each prepolymer, and tensile and properties were tested. And the optimum quantity of curing accelerator for the PU was 0.05~0.1%. In the tensile test, TDI based PU was superior to MDI based PU, and also PTMG based PU was superior PPG based PU.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.985-990
• /
• 1995

Grapefruit seed extracts(GFSE) have some unknown compounds which exhibit the antibiotic activities aganist microorganisms including bacteria and fungi. We have examined the effects of GFSE on the growth of Enterobacter pyrinus which was isolated from necrotic lesions of pear trees. During the cultivation, the growth of the bacteria was strongly inhibited at the low concentration(0.01%, w/w) of GFSE. Hydrophobic fraction extracted from GFSE by mixed solvents (chloroform : methanol : water, 1 : 2 : 0.8, v/v/v) had components which inhibited the growth of bacteria. There was, however, no inhibitory effect of GFSE on the activities of several enzymes including hexokinase, glucose 6-phosphate dehydrogenase, malate dehydrogenase and succinate dehydrogenase. $O-nitrophenyl-{\beta}-D-galactopyranoside(ONPG)$, the artificial substrate of ${\beta}-galactosidase$ was hydrolyzed in the presence of GFSE, indicating that the membrane was pertubated by the GFSE. From the results it was suggested that the antibiotic activity of GFSE is due to the change of membrane permeability of cell. GFSE was fractionated by high performance liquid chromatography equipped with $C_{18}$ reverse phase column. Among active fractions, three peaks were identified as 1-chloro-2-methyl-benzene (o-toluene), N,N-dimethyl-benzenemethaneamine, 1-[2-(2-ethylethoxy)ethoxy]-4- (1,1,3,3-tetramethyl)-bezene, respectively, while the other three remained unidentified.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.797-802
• /
• 2003

Structured lipids (SL) were synthesized by esterification of corn oil and conjugated linoleic acid (CLA) in a continuous packed-bed column reactor. The effects of flow rate, reaction temperature, and substrate molar ratios were studied. The reaction was catalyzed by TL IM (immobilized lipase from Thermomyces lanuginosa). Results of triacylglycerol (TAG) analysis by GC showed that the incorporated CLA isomers were mainly cis9, trans11- and trans 10, cis12-CLA. Slower flow rates yielded higher incorporation, and maximum incorporation of CLA was obtained with a molar ratio of 1:3 (corn oil: CLA) at a temperature of $55^{\circ}C$. The obtained SLs had iodine values ranging from 120 to 128. The SLs were composed of TAG $(98{\sim}99%)$, 1,2- and 1,3-diacylglycerol ($0.7{\sim}1.3%$), and a small amount of monoacylglycerol.