• The Korean Journal of Mycology
• /
• v.15 no.3
• /
• pp.149-157
• /
• 1987

This study was undertaken to investigate the differentiation, from spore germination to hyphae growth and phialide formation, of Aspergillus niger through the method of synchronous and submerged culture. Through continuous experiments by shake culture with potassium acetate medium, we observed the formation of spores at appropriate concentration and pH. Potassium acetate medium was set pH 5.5, 6.0, 6.5 and 7.0 on each scale, and control, 20 mM, and 40 mM, 80 mM and 160 mM concentrations on the other scale. Aspergillus niger was cultured in the defined media at $28^{\circ}C$, and mycelial dry weight, changes of pH and the onset of sporulation were checked. The mycelial dry weight, increased in potassium acetate medium, and pH increased during mycelial growth and gradually decreased after the spore formation. When pH increased excessively in Potassium acetate medium with pH 7.0, the mycelia could not adapt and mycelial dry weight decreased gradually. At pH 5.5, the onset of sporulation was done within one day at 20 mM it took, at 80 mM three days and at 160 mM concentration. in two days, at 40 mM one to four days were taken, 80 mM concentration respectively. At pH 6.5, the onset of sporulation was done in three days and four days at 80 mM concentrations respectively. Spore formation was not shown at pH 7.0. In controlled medium with all levels of pH, spore formation was not shown.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.11
• /
• pp.79-86
• /
• 2012

Cemented soils have been used for subbase or base materials of roads, backfill materials of retaining walls and cofferdam. Such cemented soils can be degraded due to repeated wetting and drying or various weathering actions. Unlike rocks, a standard method was not defined for evaluating the durability of cemented soils. In this study, a slaking durability test and an ultrasound cleaner were used for developing a new durability test method for cemented soils. For durability tests, cemented sands with different cement ratios (4, 6, 8, and 12%) with cylindrical specimens were prepared and then air cured or under-water cured for three days. Three-day-cured specimens were dried for one day and then submerged for one day before testing. The weight loss after the slake durability test or ultrasonic cleaner operation for 10 or 20 min was measured and used for assessing durability. When a cement ratio was 4%, the weight loss from ultrasonic cleaner test was 7-25% but that from slake durability test was as much as 30-60%. For specimens with cement ratio of more than 8%, the weight loss was less than 10% from both tests. A durability index increased with increasing a cement ratio. The durability index of under-water cured specimen was higher than that of air cured specimen. The ultrasonic cleaner test was found to be an effective tool for durability assessment of cemented sands rather than the slake durability test.

• Korean Journal of Weed Science
• /
• v.16 no.1
• /
• pp.14-20
• /
• 1996

Growth, nutrient uptake and photosynthesis as affected by submersion of shoot in pickerel weed (Monochoria vaginalis Presl.) were determined. The shoots of pickerel weeds in hydroponic culture were subjected to the submerged or emerged condition at 3- or 5-leaf stage for 8 or 10 days. Under submerged condition, growth in plant height was enhanced, but leaf number, leaf area, fresh and dry weight were reduced compared to those under the emerged condition. Similar responses in growth to submergence were obtained with the pickerel weeds rooted in the soil. Under submergence, chlorophyll content increased during the first 2 days, but thereafter remarkably decreased at 3-leaf stage and after the first 4 days at 5-leaf stage. Compared to the emerged condition, uptakes of $NH_4\;^+$-N, $NO_3\;^-$-N, $P_2O_5$ and $K^+$ were reduced, but uptakes of $Ca^{++}$ and $Mg^{++}$ increased under the submerged condition. Photosynthetic rate of shoot under water, measured by $CO_2$electrode, showed the maximum by 210 ${\mu}$moles $HCO_3\;^-$/g F.W. at the 8th day after submergence(DAS) at 3-leaf stage and 320 ${\mu}$moles $HCO_3\;^-$/g F. W. at 6 DAS at 5-leaf stage. These results indicate that pickerel weeds grow much better when the shoot is air-exposed and are less tolerable to submergence at 3 leaf-stage than at 5-leaf stage.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.2
• /
• pp.168-176
• /
• 2014

The morphology of filamentous fungi closely correlates with the productivity in submerged culture. Using itaconic acid (IA) production by Aspergillus terreus as a research model, the quantitative relationship between the growth form of A. terreus and IA production was investigated. IA fermentation was scaled up from shake flasks to a 7 L stirred tank bioreactor based on the quantitative relationship. Our results demonstrated the following: (1) Three morphologies of A. terreus were formed by changing the inoculum level and shape of the flask. (2) Investigation of the effects of the three morphologies on broth rheology and IA production revealed the higher yield of IA on dry cell weight (DCW, IA/DCW) and yield of glucose on DCW (consumed glucose/DCW) were achieved during clump growth of A. terreus. (3) By varying the $KH_2PO_4$ concentration and culture temperature, the relationships between clump diameter and IA production were established, demonstrating that the yield of IA on DCW ($R^2$ = 0.9809) and yield of glucose on DCW ($R^2$ = 0.9421) were closely correlated with clump diameter. The optimum clump diameter range for higher IA production was 0.40-0.50 mm. (4) When the clump diameter was controlled at 0.45 mm by manipulating the mechanical stress in a 7 L fermentor, the yield of IA on DCW and yield of glucose on DCW were increased by 25.1% and 16.3%, respectively. The results presented in this study provide a potential approach for further enhancement of metabolite production by filamentous fungi.

• Journal of Powder Materials
• /
• v.19 no.6
• /
• pp.435-441
• /
• 2012

A new manufacturing process of Fe-Cr-Al powder porous metal was attempted. First, ultra-fine fecralloy powders were produced by using the submerged electric wire explosion process. Evenly distributed colloid (0.05~0.5% powders) was dispersed on PU (Polyurethane) foam through the electrospray process. And then degreasing and sintering processes were conduced. In order to examine the effect of sintering temperature in process, pre-samples were sintered for two hours at temperatures of $1350^{\circ}C$, $1400^{\circ}C$, $1450^{\circ}C$, and $1500^{\circ}C$, respectively, in $H_2$ atmospheres. A 24-hour TGA (thermo gravimetric analysis) test was conducted at $1000^{\circ}C$ in a 79% $N_2$+21% $O_2$ to investigate the high temperature oxidation behavior of powder porous metal. The results of the high temperature oxidation tests showed that oxidation resistance increased with increasing sintering temperature (2.57% oxidation weight gain at $1500^{\circ}C$ sintered specimen). The high temperature oxidation mechanism of newly manufactured Fe-Cr-Al powder porous metal was also discussed.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.4
• /
• pp.270-274
• /
• 2006

This study proposes a new method for automatic recording of snowfall by a mass unit which is required in weather forecast and hydrology research. In this method the weight of a buoyancy bar submerged in a liquid is measured by a strain-gauge loadcell. Field test results of the strain-gauge loadcell showed good stability as well as high accuracy. Indoor tests of the instrument using a large tank of 120 cm diameter and 25 cm height connected to a small tank measured the liquid level with a good stability, showing a measurement error of less than 0.1 mm in a 100 mm range. This method of water depth measurement is very useful in measuring snowfall because it has no limitation on the funnel size of the instrument. In addition, an antifreezing solution instead of water used in the tank makes a heating system for melting snow unnecessary.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.123-129
• /
• 1993

Because the existing scour prediction formulas for plunge pools of pipe culverts and spillways give a wide range of predicted scour depths, it is difficult to estimate actual scour depths. A review of literature showed that wide range of predicted values was caused mostly by lack of thorough analysis of the scour mechanism. In this study, the effects of the parameters govering scour were examined, and the scour potentials were measured. The major variables govering scour were the velocity and size of jet impinging into the plunge pool, the submerged weight of bed material, the ratio of jet size to bed material size, the tail watr depth of the plunge pool, and the angle of jet impact on water surface. The ratio of jet size to bed material size to bed material size was found to be another significant parameter affecting scour for larger bed materials. A densimetric Froude nember of the bed material in incipient motion was formulated. This number represented the scour potential of the jet at the point where the bed material was tested.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.474-477
• /
• 2002

Equipment to cauterize tumors by an electrically heated Kanthal wire is under development. The wire( alloy of iron, chromium and Aluminum) keeps sufficient strength up to 1400 degrees in Celsius. Although AC 50Hz current source is used in the prototype experiment, RF current will be used in future. The diameter of the Kanthal wire was 0.3 mm which was connected to Kanthal wire of 0.8 mm. The thicker wire was used as a leading wire. The possibility of application of the heating wire in combination with an ultrasound endoscope was determined, where ultrasound endoscope is to be used to monitor the location on the wire and an extent of a tumor in digestive organs. This procedure requires the wire to be applied inside ultrasound transmitting media. First, the wire was applied in the degassed water in which a chicken liver sample was submerged. The wire, however, burned out in water soon after it became red-hot at 12 A. The reason is that large current is required for the wire to become red-hot due to strong convection. Starch paste of 3 weight percent was employed instead of water. This made the wire red-hot approximately at 6 A, showing the increased viscosity of the starch decreased the convection and the wire was cover by the steam. The liver sample was cauterized successively, while the location of the wire and the liver was monitored by an ultrasound diagnosis equipment outside the plastic vessel of the starch paste.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.5
• /
• pp.548-553
• /
• 1999

A production of $\beta-Carotene$was attempted in a fed-batch culture of Blakeslea trispora by controlling both foam and dissolved oxygen in the presence of surfactant, Span 20. Results obtained from the shake flask cultures indicated that a high concentration of dissolved oxygen was needed for both cell growth and $\beta-Carotene$ synthesis, and the optimal concentration of glucose was found to be in the range of 50-100 g/l. In order to maintain the dissolved oxygen concentration level at higher than 50% of air saturation, pure oxygen was automatically sparged into the medium with air. Foam was controlled by bypassing air from the submerged aeration to the headspace in response to the foam that was caused by Span 20. High agitation speed was found to be detrimental to the cell growth due to shear damage, even though it provided sufficient dissolved oxygen. On the other hand, a low aeration speed caused stagnant regions in the fermentor because of improper mixing. Thus, for the fed-batch operation, agitation speed was increased gradually from 300 to 700 rpm to prevent cell damage at the initial stage of fermentation and to give efficient mixing for a viscous culture broth as the culture proceeded. By controlling dissolved oxygen and foam, a high concentration of $\beta-Carotene$otene (1,190 mg/l) was obtained in 6 days of the fed-batch culture of B. trispora with 2.5% of the dry cell weight, which was approximately 5 times higher than that of the batch cultures.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.2
• /
• pp.103-110
• /
• 1983

The main purpose of the present study is to evaluate a revolving plate type biofilter system for mass culture of eel(Anguilla japonica) based on the experimental rearing for 120 days (Oct. 1982-Feb. 1983). Water quality changes, growth efficiency of fish and fish disease treatment were critically evaluated. A revolving plate type biofilter system was designed(Fig. 1). The system consisted of a glass tank (150 l), a revolving plate biofilter and a settling tank(150 l). The biofilter consisted of 60 submerged quadriangular plates ($28{\times}37$ cm) and 30 revolving plates (32 cm diameter) for a total of 19.0 $m^2$ of surface area. The revolving plates were made to rotate 10 time per minute, The total water volume of the rearing system were 300 l, and everyday 1/3 of the total water volume were changed with freshly prepared water. In the rearing system a total of 2 kg of eel (1,500 individuals, mean weight:1.3 g) were reared fed on the pellet feed and the dough feed. The growth efficiency were much better for the pellet feed (FC: 1.79) compared to the dough feed (FC: 3.56). During the experimental rearing water quality control was satisfactory. Total ammonia concentrations were 0.38-0.59 ppm and nitrite concentration were 0.83-1.19 ppm. On the other hand alkalinity decreased from 176ppm just after the water change to 17ppm just before the water change. The low alkaline condition was compensated by the regular change of water. Epidemics of parasitic gill-flocks (Pseudodactvlogylus sp.) was observed, and they were easily eliminated by the treatment of DDVP (1.0 ppm). Trichodina sp. and Costia sp. were observed, and they were also controlled by the treatment of potassium permanganate (4.0 ppm).