• The Journal of Korea Robotics Society
• /
• v.19 no.1
• /
• pp.65-70
• /
• 2024

Tool wear is considered an important issue in manufacturing and engineering, as worn tools can negatively impact productivity and product quality. Given that the wear status of tools plays a decisive role in the production process, measuring tool wear is a key task. Consequently, there is significant attention in manufacturing fields on the precise measurement of tool wear. Current domestic methods for measuring wear are limited in terms of speed and efficiency, with traditional methods being time-consuming and reliant on subjective evaluation. To address these issues, we developed a measurement module implementing the DeepContour algorithm, which uses image processing technology for rapid measurement and evaluation of tool wear. This algorithm accurately extracts the tool's outline, assesses its condition, determines the degree of wear, and proves more efficient than existing, subjective, and time-consuming methods. The main objective of this paper is to design and apply in practice an algorithm and measurement module that can measure and evaluate tool wear using image processing technology. It focuses on determining the degree of wear by extracting the tool's outline, assessing its condition, and presenting the measured value to the operator.

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.861-866
• /
• 2011

Purpose: Together with the breast, buttocks are an important element of attractive body contour. To make a beautiful buttocks, improvement of body contour around the buttock as well as buttock augmentation and lifting is also important. The authors investigated characteristic features of buttocks in Koreans and report about the results of liposculpture and autologous fat injection for improving buttock's contour. Methods: We performed a retrospective study of 21 patients who would like to gluteal reshaping. We checked about buttock's ptosis, projection, depression, gluteal retraction and excessive fat accumulation around buttocks. Depending on it, we performed liposculpture and autologous fat injection. Under general anesthesia, we harvested fat from excessive fat accumulation areas around buttocks, and injected into buttocks medio-superiorly. Postoperatively, pillows were positioned on the bed not to press the buttocks which were injected with the fat. Results: Based on the shape of buttocks, A-shape is seen in 4 cases (19%), V-shape 3 cases (14%), squareshape 9 cases (43%), round-shape 5 cases (24%). Based on the Gonzalez's ptosis grading method, 1 degree ptosis is 1 case (4%), 2 degree ptosis is 6 cases (29%), 3 degree ptosis is 8 cases (38%), 4 degree ptosis is 6 cases (29%). There were no complications such as infection, hematoma, pain, dysparethesia. The subjective assessment of surgical results by patients was excellent. Conclusion: To make a beautiful buttock, improvement of body contour around the buttock as well as buttock augmentation and lifting is also important. Liposculpture and autologous fat grafting are very safe, useful and easy methods for improving buttock's contour.

• Journal of Biomedical Engineering Research
• /
• v.26 no.6
• /
• pp.357-363
• /
• 2005

Active contour models have been extensively used to segment, match, and track objects of interest in computer vision and image processing applications, particularly to locate object boundaries. With conventional methods an object boundary can be extracted by controlling the internal energy and external energy based on energy minimization. However, this still leaves a number of problems, such as initialization and poor convergence in concave regions. In particular, a contour is unable to enter a concave region based on the stretching and bending characteristic of the internal energy. Therefore, this study proposes a method that controls the internal energy by moving the local perpendicular bisector point of each control point on the contour, and determines the object boundary by minimizing the energy relative to the external energy. Convergence at a concave region can then be effectively implemented as regards the feature of interest using the internal energy, plus several objects can be detected using a multi-detection method based on the initial contour. The proposed method is compared with other conventional methods through objective validation and subjective consideration. As a result, it is anticipated that the proposed method can be efficiently applied to the detection of the pulmonary parenchyma region in medical images.

• Phonetics and Speech Sciences
• /
• v.2 no.4
• /
• pp.213-221
• /
• 2010

The number of North Korean refugees entering South Korea is continuously increasing. North Korean speakers show significant differences in vowel and consonant phonetics, length of vowels, and the rhythm and intonation of sentences. The object of this research was to examine the effectiveness of a speech intervention program for North Korean refugees using visual feedback through acoustical analysis for intonation. The subjects were three adults with no speech disabilities who had been in South Korea for less than five years. They had not received any prior treatment for inflection change. The program was set in a discourse situation and used Praat to evaluate intonation and provide visual feedback as demonstrating proper intonation changes through pitch contour. The results after intervention are as follows. First, intonation was significantly improved according to a 5-point subjective evaluation scale. Second, the pitch contour was similar to the contour of standard South Korean pronunciation. The subjects were very satisfied with this initial treatment and showed a high level of motivation. In subsequent study, the development of intervention and the comparison of interventions will be needed as well.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1996.06a
• /
• pp.175-180
• /
• 1996

In this paper, a new image segmentation method based on merging of two low contrast neighbor regions iteratively is proposed. It is suitable for very low bit rate coding. The proposed method reduces efficiently contour information and preserves subjective and objective image quality. It consists of image segmentation using 4-level hierarchical structure based on mathematical morphology and 1-level region merging structure using the contrast difference of two adjacent neighbor regions. For each segmented region of the third level, two adjacent neighbor regions having low contrast difference value in fourth level based on contrast difference value is merged iteratively. It preserves image quality and shows the noticeable reduction of the contour information, so that it can improve the bottleneck problem of segmentation-based coding at very low bit rate.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1260-1264
• /
• 2006

Shock-type vibrations are usually experienced in vehicles excited by impulsive forces. Fifteen subjects used magnitude estimation to judge the discomfort of vertical shock-type vibration generated on a rigid seat. The shocks had different frequencies and magnitudes and were produced from the response of a 1 degree-of-freedom model to a half-sine force input. The magnitudes of the shocks, expressed in terms of both peak-to-peak value and un-weighted vibration dose values, VDVs, were correlated with magnitude estimates of the discomfort. In this study, equivalent comfort contour of shock-type vibration were obtained. From the contour, it was investigated that shock-type vibration at frequency below 0.8 Hz and between 4.0 Hz and 10.0 Hz is highly sensitive to the discomfort than at other frequencies.

• MALSORI
• /
• no.35_36
• /
• pp.157-173
• /
• 1998

This is a pilot study on applying the Rise/Fall/connection(RFC) model to Korean intonation tot speech synthesis. RFC model contains successive intonation events, which can be pitch accents and intonation boundary tones. The intonation contour of RFC model is composed of piecewise linear curves of rise, fall, and connection elements, and each element can have any amplitude and duration. In this paper, elements of RFC model is slightly modified to accommodate the characteristics of Korean intonation. Subjective preference test was conducted to compare the modified RFC model with the original one. The results show that the intonation contour produced by the modified RFC model is perceptually indistinguishable from that of the original RFC model, while the former requires less number of labels than the latter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1691-1697
• /
• 1997

This paper presents a new motion compensated error coding method suitable for region based image coding system. Compared with block based conding, the region based coding improves subjective quality as it estimates and compensates 2D (or 3D) translantional, rotational, and scaling motion for each regions. although the region based coding has this advantage, its merit is reduced as bock-DCT (2D-DCT) is used to encode motion-compensated error. To overcome this problem, a new region adaptive motion compensated error coding technique which improver subjective and objective quality in the region boundary is proposed in this paper. In the proposed method, regions with large error are estimated using contour of the regions and contrast between the regions. The regions estiated as those with large error are coded by arbitrarily shaped image segment coding method. The mask information of the coded regions is not transmitted because it is estimated as the same algorithm in the encoder and the decoder. The proposed region adaptive motion conpensated error coding method improves about 0.5dB when it is compared with conventional block based method.

• Korean Journal of Cognitive Science
• /
• v.2 no.2
• /
• pp.261-278
• /
• 1990

Two experiments were performed to test whether the perception of subjective contours occurs not only through bottom-up processes but also throught top-down processes by manipilating such cognitive factors as superimposition cues and selective attention.In the first experiment,the phenomenon of neon color spreading effect was used to investigate the effect of superimpoed Kanizsa triangles.To identify the effect of superimposition, two different colors were used,one for each overlapped Kanizsa triangle,and the subjects were asked which neon-like color they saw for the overlapped portion.Result indicates that the only neon-like color of the superimposing triangle can be perceived,which implies that super impostition cues may act upon the formation process of subjective contour as a a sort of top-down information.In the second experiment,two partially ovwelapped Kanizsa squares of which direction of superimposition were ambiguous and thus reversable depending on the observer's mental set were used to inverstigate the effect of selective attention.Subjects were instructed to pay attention only to one of the squares and report the neon- like color of the overlapped portion of them.Result shows that the subjects perceive only the neon-like color of superimposing square,which implies that such cognitive factors as selective attention may strongly influence the formation of subjective contours. In conclusion,the results of this study show that the subective contour does not depend only on bottom-up processes but also on such cognitive factors as super-imposition cues and selective attention.

• Fashion & Textile Research Journal
• /
• v.15 no.2
• /
• pp.309-315
• /
• 2013

This study examines the difference of surface properties according to napping characteristic of artificial suedes, measuring surface structure observation, the contact/non-contact method roughness, warm-cool feeling of touch, and subjective hand evaluation. Surface and cross-section observations showed a discernible difference in fineness, curl, length, mount of napping, and covering power of base fabric. The surface properties of artificial suede evaluated by KES-FB4 showed that the shorter napping length the more smooth surface and the roughness increased reciprocally with friction resistance and surface contour when the nap length reaches a high level. The surface roughness measuring system applied a laser displacement sensor by a non-contact method to assess napping characteristic and the base fabric and napping height. Surface roughness decreased when napping was uniformly covered with base fabric; however, the surface roughness increased specifically with the uneven covering power of the base fabric. For qmax of the suedes, those that had short and smaller amounts of napping increased; however, the napping of length and amount at some stage generated a low qmax value. The warm sensation in all suedes were strongly perceived, but the cool sensation of the perception was lower in the subjective evaluation. Smoothness and softness were perceived when the suede has a long and large amount napping; however, smoothness and hardness were perceived when the suede was short and with the uneven covering power.