• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.641-652
• /
• 2005

In this paper, the Coefficient of Subgrade Reaction was analyzed from the data which were the results of lateral pile loading tests and pressuremeter tests on construction sites. The prediction method with N-value was compared with lateral pile loading tests and the results of lateral pile loading tests were compared with the prediction method considering diameter of a pile. Also, the results of lateral pressuremeter tests were compared with those of lateral pile loading tests. As a result, consideration for a diameter and lateral deformation of a pile was needed when the coefficient of horizontal subgrade reaction is presumed. Therefore, a formula which is taking into account the allowable deformation of a pile was suggested from lateral pressuremeter tests in this study.

• 한국지반공학회논문집
• /
• 제24권6호
• /
• pp.57-67
• /
• 2008

철도노반의 다짐 후 품질을 관리하기 위하여 비반복 평판재하시험(nonrepetitive plate loading test)으로부터 얻어지는 지반반력계수(subgrade reaction modulus, $k_{30}$)와 반복평판재하시험(repetitive plate loading test)으로부터 획득하는 변형률계수(strain modulus, $E_v$)의 두 계수를 혼용하고 있다. 평판을 이용한 재하시험을 수행한다는 점에서 두 시험법은 동일하나, 설계정수 획득방법, 반복재하 횟수, 각 하중 단계에서의 시험 종료방법 등 시험방법에는 큰 차이가 있다. 본 논문에서는 두 시험의 차이를 비교 분석하고 두 계수에 대한 상관성을 평가하였다. 이를 위하여 경부고속철도 2단계 공사구간의 원지반 6개소와 쌓기지반 5개소에 대한 총 22회의 현장시험을 실시하였다. 현장 시험 시의 응력조건, 변형률 조건 및 포아송비 조건을 고려한 보정을 수행하여 두 계수의 상관성을 높였으며, 현장에서 사용이 가능하도록 지반종류에 따른 상관계수를 제시하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2014년도 춘계학술대회
• /
• pp.253-254
• /
• 2014

In offshore, various external forces such as wind force, wave force and impulsive breaking wave force act on offshore structures. Many researches about this forces are published. Kim and Cao(2008) published researche on wave force of vertical cylinder. Kim and Go(2013) performed research on the subgrade reaction by external forces. Among this forces, impulsive breaking force is more massive than other forces, especially. Therefore, the studies about impulsive breaking wave forces have been carried out. Chun and Shim(1999) analyzed dynamic behavior of cylindrical pile subjected to impulsive breaking wave force. In this study, when the impulsive breaking wave force acts on the offshore wind turbine, the subgrade reaction acting on the mono-pile of the offshore wind turbine is calculated by p-y curve. The calculation is carried out to the multi-layered.

• Geomechanics and Engineering
• /
• 제7권6호
• /
• pp.679-703
• /
• 2014

This paper investigates nonlinear response of 51 laterally loaded rigid piles in sand. Measured response of each pile test was used to deduce input parameters of modulus of subgrade reaction and the gradient of the linear limiting force profile using elastic-plastic solutions. Normalised load - displacement and/or moment - rotation curves and in some cases bending moment and displacement distributions with depth are provided for all the pile tests, to show the effect of load eccentricity on the nonlinear pile response and pile capacity. The values of modulus of subgrade reaction and the gradient of the linear limiting force profile may be used in the design of laterally loaded rigid piles in sand.

• 한국해양공학회지
• /
• 제13권1호통권31호
• /
• pp.94-104
• /
• 1999

In order to evaluate the performance of axially of laterally loaded piles experimentaly, pile load tests can be carried out at the site Otherwise stress analyses or subgrade reaction analyses can solve the problem. In this study, stress analysis using FLAC code and subgrade reaction analyses using load transfer curves recommended by API(1993) were performed consistently on the basis of a result of site investigations, and the result of analyses was compared with the measured. As a result the behavior of pile heads was analyzed accurately for both axially and laterally loaded tests. Furthermore axially transferred loads were calculated appropriately for the measured and axial loads were transferred mainly mainly by the frictional resistance rather than by the tip resistance. Consequently, it can be commented that both analysis methods of soil-pile systems are applicable at teh objective site and that solutions may be more accurate if material properties from the site investigation are more explicit.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.69-78
• /
• 2014

PURPOSES : The purpose of this paper is showing that the state of pavement sublayers can be evaluated differently according to direction of FWD. METHODS : The concrete pavement slabs above subgrade without anything, subgrade with cavity, and box culvert were modeled by finite element method(FEM). The modeled pavements were analyzed by changing the direction of falling weight deflectometer(FWD). The deflection results obtained from FEM were used to calculate radius of relative stiffness and composite modulus of subgrade reaction using AREA method. Then, the analyzed results were compared to the results of the test performed at the Korea Expressway Corporation(KEC) test road. RESULTS : The composite modulus of subgrade reaction increased with subgrade elastic modulus, while radius of relative stiffness decreased. The pavement sections of pure earth showed the consistent results regardless of FWD direction. In case there was cavity, the radius of relative stiffness was larger and composite modulus of subgrade reaction was smaller when FWD was leaving the cavity than when approaching the cavity. This pattern became clear when the cavity got larger. In case of the section with box culvert, the pattern was opposite to the case of cavity. When the soil cover depth increased, the effect of box culvert got smaller. When the load was applied far from the cavity and box culvert, the effect was also declined. The test performed at the KEC test road showed identical results to those of finite element analysis. CONCLUSIONS : The direction of FWD should be considered in evaluation of the state of pavement sublayers because it can be evaluated differently even under identical condition.

• 한국산학기술학회논문지
• /
• 제22권6호
• /
• pp.267-274
• /
• 2021

말뚝의 허용횡방향지지력을 결정하는 방법으로는 지반반력법과 극한횡방향지지력에 근거한 방법이 많이 쓰이고 있는데 설계시 지반반력법에 근거한 방법만을 적용하는 경우가 있다. 본 연구에서는 지반조건과 말뚝머리 구속조건 그리고 말뚝길이에 따른 말뚝의 허용지지력을 이들 두 가지 방법을 적용하여 구하고 상호 비교함으로써 해석에서 고려한 조건들이 말뚝의 허용횡방향지지력 결정법에 미치는 영향을 알아보고자 하였다. 연구결과에 따르면 말뚝머리 구속조건 및 말뚝길이에 상관없이 연약 점성토 지반에 설치된 말뚝의 경우 지반반력법에 의한 허용횡방향지지력이 설계를 지배함을 알 수 있었고 점성토의 비배수강도가 커짐에 따라 극한횡방향지지력을 통한 허용횡방향지지력이 설계를 지배함을 알 수 있다. 사질토 지반에 설치된 말뚝의 경우 느슨한 사질토지반에 설치된 말뚝머리 자유인 짧은말뚝의 경우를 제외하고 모든 경우에 있어 극한횡방향지지력을 통한 허용횡방향지지력이 설계를 지배함을 알 수 있다. 횡방향말뚝의 설게시 허용 횡방향변위량에 근거한 설계만으로 충분하다는 견해도 있지만 본 연구결과에 따르면 극한횡방향지지력에 근거한 허용횡방향지지력의 계산 또한 필요함을 알 수 있었다. 수평지반반력계수는 허용횡방향변위량 이내에서는 말뚝폭에 큰 영향을 받지 않음을 알 수 있었으며 실제 많이 쓰이는 말뚝폭의 범위인 20~90cm 인 경우 말뚝폭의 영향을 무시해도 될 것으로 생각된다.

• 한국지반공학회지:지반
• /
• 제1권2호
• /
• pp.75-80
• /
• 1985

건축물의 연속기초해석에서 종래에는 등분포 접지압을 바탕으로 한 해석방법 위주였다. 좀더 정확한 기초판의 음력해석을 위한 변화접지압을 고려한 해석방법과 기존방법들을 비교.분석해 보고, 더 나아가 기초판에 근응력이 생길 경우 응력을 줄이기 위한 Pontoon식 기초를 소개한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1996년도 가을 학술발표회 논문집
• /
• pp.107-114
• /
• 1996

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1827-1832
• /
• 2007

The purpose of a railway track is to provide a smooth surface for safe and economical train transportation. The performance of the track results from a complex interaction of the track and subgrade components in response to train loading and environmental actions. In the past, the role of subgrade as the track foundation were not recognized adequately. There are insufficient information and inadequate methods for subgrade design, assessment and improvement. This situation has survived for a long time largely because a subgrade defect can often be adjusted by adding more ballast under the ties or applying more frequent track maintenance. Therefore, the application of reinforced roadbed technology will be expected to increase in the future. The reinforced roadbed thickness is set depending on subgrade reaction modulus$(K_{30})$ in the condition of upper subgrade through PBT in both conventional railroad and KTX railroads. As train velocity (V), train passing tonnage (N), and train axial load (P) are not considered in design, the roadbed thickness could be overestimated (or underestimated). Therefore, In this study, the computer model, GEOTRACK, was analyzed the influence of reinforced roadbed thickness factors on track modulus and the characteristics of stress pulses in track and subgrade generated by repeated axle loading.