• 전기학회논문지
• /
• 제62권12호
• /
• pp.1700-1705
• /
• 2013

A second harmonic millimeter wave oscillator utilizing sub-harmonic injection-synchronization is presented. A 8.7GHz oscillator with MES-FET is designed, and is driven as a harmonic output oscillator at 17.4GHz by means of sub-harmonic injection-synchronization. The oscillator operates as a multiplier as well as a oscillator in this scheme. Adopting this method, a high sable, high frequency millimeter wave source is obtainable even though self-oscillating frequency of an oscillator is relatively low. The range of injection-synchronization is about 26MHz, and is proportional to the input sub-harmonic power. The spectrum analysis of the 2nd harmonic output frequency shows remarkably decreased the phase noise level.

• 한국정보통신학회논문지
• /
• 제12권1호
• /
• pp.17-24
• /
• 2008

서브하모닉파 주입동기에 의한 밀리미터파 대역 고주파원의 고성능화에 대하여 다루었다. MES-FET로 8.7GHz의 발진기를 구성하고 서브하모닉파의 주입동기 방식으로 구동하여 17.4GHz의 고조파를 발생시켰다. 이러한 시스템에서 발진기는 발진과 동시에 체배기의 기능을 수행하여 안정된 고조파 발생시킬 수 있다. 이 기술을 채택하면 자려발진주파수가 비교적 낮은 발진기로도 고안정, 고출력 고주파를 발생시키는 고조파출력 발진기를 실현할 수 있다. 실험의 결과, 주입 동기의 범위 26MHz 내에서 고출력 고조파가 관측되었으며, 서브하모닉파 주입전력에 비례하였다. 스펙트럼 분석기로 고조파 출력의 파형을 관측한 결과, 제2고조파 출력의 위상 안정성이 현저히 향상되었음이 확인되었다.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1496-1504
• /
• 2019

This paper proposes a new THD reduction algorithm for modular multilevel converters (MMCs) with offset voltage injection operated in nearest level modulation (NLM). High voltage direct current (HVDC) is actively introduced to the grid connection of offshore wind powers, and this paper deals with a voltage generation technique with an MMC for wind power generation. In the proposed method, third harmonic voltage is added for reducing the THD. The third harmonic voltage is adjusted so that each of the pole voltage magnitudes maintains a constant value with a maximum number of (N+1) levels, where N is the number of sub-modules per arm. By using the proposed method, the THD of the output voltage is mitigated without increasing the switching frequency. In addition, the proposed method has advantageous characteristics such as simple implementation. As a part of this study, this paper compares the THD results of the conventional method and the proposed method with offset voltage injection to reduce the THD. In this paper, simulations have been carried out to verify the effectiveness of the proposed scheme, and the proposed method is implemented by a HILS (Hardware in the Loop Simulation) system. The obtained results show agreement with the simulation results. It is confirmed that the new scheme achieved the maximum level output voltage and improved the THD quality.

• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.1076-1081
• /
• 2003

본 논문에서는 반도체레이저를 이용한 밀리미터파 대역의 신호를 생성하는 방법에 대해 제안하였다. 광대역에서의 밀리미터파 신호를 얻기 위해서는 윈하는 공진 주파수대역의 신호를 얻기 위해는 서브 하모닉의 좁은 신호 성분의 하모닉 신호인 다중의 신호를 서로 beating하여 원하는 주파수 대역의 신호를 얻을 수 있다. 따라서 본 논문에서는 반도체레이저를 사용한 광주입 방법을 통하여 실제적으로 원하는 주파수 대역의 신호를 얻기 위해 실험적으로 고찰하였으며, 신호 성분의 성능을 구하기 위해 phase noise 성분을 측정하였다.

• 전기학회논문지
• /
• 제57권1호
• /
• pp.65-72
• /
• 2008

This paper describes the development of a novel islanding detection method, which uses the signal cross-corelation scheme between the injected reactive current and the power frequency deviation. The existing method, which injects the reactive current of 2.5-5% to the rated current and detects the frequency deviation directly, brings about lowing the power quality due to the harmonic pollution. The proposed method eliminates the weak point of the existing method, because it injects the reactive current less than 1% to the rated current. The operational feasibility was verified through computer simulations with PSCAD/EMTDC software, and experimental works with a 10kVA hardware prototype. The proposed method can detect the islanding status effectively without lowing the power quality of interconnected distributed generation system.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.249-257
• /
• 2022

In recent years, if we order food by easily accessing the online market with our smartphone, we can receive the product in a fresh state at dawn the next day. Cold chain is an industry that can create high added value because it has both the characteristics of general logistics and sensitivity to temperature. Based on the electrical specifications derived from the reefer container capacity requirement investigation, we proved that power supply to up to 33 reefer containers can be made by using three additional auxiliary power supplies which are applied for freight trains in Korea. In this paper, we conducted a research on a design of power supply system for freight train reefer container based on simulation as a basic research necessary for low-temperature distribution and cold chain construction based on the reefer container railroad. Consequently, the simulation was conducted using the three-phase inverter diagram in PSIM and the SVPWM (3-harmonic injection method) control technique, and it was verified that the required power voltage was satisfied with 622V_dc, which is lower than the input voltage of general SPWM of 718V_dc. The details of this paper could be used as a foundational study for constructing cold chains based on a reefer container dedicated to freight trains in the future.