• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.127-128
• /
• 2006

In this paper, we propose a novel signaling method using chirp signals in UWB radio with satisfaction of FCC regulation. Chirp signals have been used in many ranging systems such as radar because of its good correlation properties. Because it is important to use broader signal bandwidth in order to get higher precision of the ranging, according to the Cramer-Rao Lower Bound, UWB radio is extremely good as the ranging systems. But, it is very difficult to apply existing chirp signals to UWB, because FCC regulates that the systems operating in UWB radio must occupy signal bandwidth more than 500MHz on the condition of stopping the frequency sweeping. So, we propose multiple chirp signals which can satisfy the regulation of FCC while maintaining chirp signal's properties. The multiple chirp signals which are composed of the sub-chirps modulated by sub-carriers can expand the signal bandwidth with the same principle of OFDM systems. The simulation results show that the BER performance of the proposed multiple chirp signals is identical to that of conventional OFDM when it is applied to data communication, and that the correlation properties of the proposed signals are almost the same with properties as those of single chirp signals whose sweeping bandwidth is the same value with the proposed one.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.4
• /
• pp.59-64
• /
• 2007

In this paper, we propose a new decoding method for differentially biorthogonal chirp spread spectrum (DBO-CSS). In DBO-CSS, the information is carried on the differential phase not between the adjacent sub-chirp symbols but between the sub-chirp symbols in the same position of adjacent full-chirp symbol. So, the conventional multiple symbol differential detection (MSDD) algorithms to enhance the BER performance can not be applied to the DBO-CSS directly. In this paper, we propose a new differential detection algorithm based on a partial MSD(multiple symbol detection) and a viterbi algorithm. It is shown that the performance gain of the proposed algorithm when compared with that of the conventional detection algorithm is around 2.5dB at BER = 10-5.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1937-1939
• /
• 2015

In order to improve the performance of a chirp based transmission scheme, the cross-coherence property should be carefully considered. In this paper, we propose two pairs of combinations using multiple linear chirp (MLC) which can reduce the cross-coherence for improving IEEE 802.15.4a chirp spread spectrum systems. The simulation results show that the proposed MLC scheme can improve the performance by considering the cross-coherence.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10B
• /
• pp.1777-1784
• /
• 2000

In this paper we suggested the chirp stitching algorithm and transmitter/receiver channel to a spaceborne high resolution SAR which enables wideband signal generation and processing with minimum hardware requirement. The transmitter channel generates two sub-band signals and then generate a wideband signal using chirp stitching algorithm and the receiver channel divides a wideband signal into two sub-band signals in order to overcome the high speed data handling capability of this spaceborne systems. We generated and processed a 100 MHz wideband signal evaluated the performance and verified the feasibility of the application of this chirp stitching algorithm and transmitter/receiver channel to spaceborne high resoultion SAR.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.1-7
• /
• 2010

A new frequency offset estimation algorithm for chirp spread spectrum based on matched filter is proposed. Generally, the differential phase between successive symbols is used for the conventional frequency offset estimation algorithm. However, if the conventional frequency offset estimation algorithm is used for CSS, phase ambiguity arises because of long symbol duration and guard time. The phase ambiguity causes performance degradation of matched filter since the received signal is corrupted by the integer frequency offset. In this paper, we propose a new frequency offset estimation algorithm which separates integer and fractional frequency offset estimation for removing the phase ambiguity. The proposed algorithm estimates the integer frequency offset by using differential phase between matched filtering results of sub-chirps and successive symbols. Then, the fractional frequency offset is estimated by using the differential phase between successive symbols Simulation results show that the proposed algorithm well removes the phase ambiguity, and have almost same estimation performance compared with conventional one when there is not the phase ambiguity.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.289-297
• /
• 2011

Chirp sub-bottom profilers (SBP) data are comparatively higher-resolution data than other seismic data and it's raw signal can be used as a final section after conducting basic filtering. However, Chirp SBP signal has possibility to include various noise in high-frequency band and to provide the distorted image for the complex geological structure in time domain. This study aims at the goal to establish the workflow of Chirp SBP data processing for enhanced image and to analyze the proper parameters for the domestic continental shelf. After pre-processing, we include the dynamic S/N filtering to eliminate the high-frequency component noise, the dip scan stack to enhance the continuity of reflection events and finally the post-stack depth migration to correct the distorted structure on the time domain sections. We demonstrated our workflow on the data acquired by domestically widely used equipments and then we could obtain the improved seismic sections of depth domain. This workflow seems to provide the proper seismic section to interpretation when applied to data processing of Chirp SBP that are largely used for domestic acquisition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.930-937
• /
• 2014

Inverse synthetic aperture radar (ISAR) images can be generated by radar which radiates the electromagnetic wave to a target and receives signal reflected from the target. ISAR images can be widely used to target detection and recognition. This paper proposed a method of generation of high resolution ISAR images by synthesizing frequency spectrums of each stepped chirp waveform in one burst and sub-sampling in frequency domain. This process is performed over entire bursts during coherent processing interval. Conventional ISAR image generation method using stepped frequency waveform has a severe problem of short unambiguous range, loading to ghost phenomenon. However, this problem can be resolved by the proposed method. In simulations, we generate high resolution ISAR image of the moving target which is Boeing-737 aircraft model composed of several ideal point scatterers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.138-141
• /
• 2018

In this paper, we describe the designed digital waveform of a linear frequency-modulated (FM) chirp signal using field-programmable gate arrays (FPGAs) for image radar, and this signal is modulated with an I-Q modulator, and multiplied by 24 frequency multipliers to obtain a 94-GHz W-band wideband chirp generator. The developed chirp generator is an FM signal with a 94-GHz carrier frequency and a 960-MHz bandwidth, and the flatness is less than 1.0 dB at intermediate frequency (IF) (3.9 GHz), 2.0 dB in the W-band, and it has a 0.3-W output power in the W-band.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.361-362
• /
• 2009

High-order harmonics from gaseous atoms driven by an intense femtosecond laser pulse can form an attosecond pulse train. By selecting suitable harmonic generation conditions, the harmonic spectrum can be broad enough to form sub-hundred attoseconds. One serious limitation, however, comes from the inherent attosecond chirp originating from the harmonic generation process. We have proposed to compensate for the positive attosecond chirp by making use of negative group delay dispersion of a metallic x-ray filter or a gaseous medium. We generated 240-as pulses from neon and compressed them to 60 as after propagating through argon, close to the transform-limited duration of 47 as.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.319-320
• /
• 2008

In this paper, we propose a new frequency offset estimation algorithm for DBO-CSS which is a standard for wireless personal area network (WPAN). In DBO-CSS, there can be several integer multiples of $2{\pi}$ in the phase rotation caused by the frequency offset because of the long time difference between the samples of differential relation and the high permissible frequency offset of the crystal oscillators between the transmitter and the receiver. In this paper, we propose an estimation algorithm by using the relationships of each sub-chirp signals to find the integer part without phase ambiguity.