• Title/Summary/Keyword: styrene

Search Result 1,677, Processing Time 0.031 seconds

Selective Coordination of Silver Ions to Poly(styrene-b-(ethylene-co-butylene)-b-styrene) and its Influence on Morphology and Facilitated Olefin Transport

  • Lee, Dong-Hoon;Kang, Yong-Soo;Kim, Jong-Hak;Kang, Sang-Wook
    • Macromolecular Research
    • /
    • v.16 no.8
    • /
    • pp.676-681
    • /
    • 2008
  • The $\pi$-complex membranes of poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) of two silver salts of $AgBF_4$ and $AgCF_3SO_3$ were prepared and tested for the separation of the propylene/propane mixtures. The Fourier-transform infrared (FT-IR) spectra of these complexes showed that the silver salts were dissolved in SEBS up to a silver mole fraction of 0.14, due to $\pi$-complexation between the aromatic C=C bonds of styrene blocks and silver ions. Above this solubility limit, ion pairs and high-order ionic aggregates began to form, so that silver salts were distributed unselectively in both the EB and PS blocks. The domain size of the PS blocks was enlarged up to this critical concentration with increasing silver concentration without structural transitions, as confirmed by small angle x-ray scattering (SAXS). These structural properties of the SEBS/silver salt complexes may explain the lower separation properties for propylene/propane mixtures compared to poly(styrene-b-butadiene-b-styrene)(SBS)/silver salt complex membranes.

Production of Chiral (S)-styrene Oxide by Rhodosporidium sp. SJ-4 which has an Epoxide Hydrolase Activity (에폭사이드 가수분해효소를 갖는 Rhodosporidium sp. SJ-4를 이용한 광학활성 (S)-styrene Oxide의 생산)

  • Yoo, Seung-Shick;Lee, Eun-Yeol;Kim, Hee-Sook;Kim, Jung-Sun;Oh, You-Kwan;Park, Sung-Hoon
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.11 no.10
    • /
    • pp.857-863
    • /
    • 2005
  • A yeast strain utilizing styrene epoxide as a sole carbon and energy source was isolated from soil samples for the production of enantiopure of styrene epoxide by kinetic resolution. The strain, identified as a Rhodosporidium toruloides SJ-4, expressed an epoxide hydrolase which preferentially converted (R)-styrene epoxide into the corresponding diol. A maximum activity of 135 U/L was observed when biomass (dry cell mass) reached 6.7 g/L at 21 h of batch culture. Under the partially optimized reaction conditions ($35^{\circ}C$ and pH 8.0), the optically pure (S)-styrene epoxide was obtained with the yield of 21% when the initial substrate concentration was 100 mM. The reaction was completed at 9 h.

Chromosome Aberrations of Styrene Exposed Workers (스티렌 취급근로자의 염색체이상연구)

  • Maeng, Seung Hee;Kang, Sung Kyu;Yang, Jung Sun;Lee, Jong Sung;Yu, Il Je
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.5 no.1
    • /
    • pp.40-47
    • /
    • 1995
  • We analyzed sytrene concentrations in air and in blood, mandelic acid in urine, and chromosome aberrations in peripheral lymphocytes of twenty one styrene-exposed workers in two reinforced plastic factories. In addition, in vitro testing for chromosome aberration was carried out. The dose-dependent clastogenicity of styrene was confirmed in the cultured Chinese hamster lung cell(CHL) with metabolic activation. The environmental styrene concentrations and urinary mandelic acid levels of analyzed subjects were different in two plants examined, but the exposure levels in most workers examined were lower than the permissible exposure levels. Chromosome aberrations of the styrene exposed workers showed no increase in the percentage of aberrant cells as compared with the control group. No correlation was found between the exposure levels and the frequencies of chromosome aberrations in workers.

  • PDF

Influence of Styrene Contents on Retraction Behaviors of SBR Vulcanizates (SBR 가황물의 회복 거동에 미치는 스티렌 함량의 영향)

  • Choi, Sung-Seen;Woo, Chang-Su;Chang, Dong-Ho
    • Elastomers and Composites
    • /
    • v.40 no.4
    • /
    • pp.237-241
    • /
    • 2005
  • Influence of the styrene content on the retraction behaviors of SBR vulcanizates was studied. SBRs with different styrene contents of 15 and 21 wt% were used. The vulcanizate with low styrene content started to recover at lower temperature than that with high one. The recovery rate of the vulcanizate with low styrene content was slower than that with high one. The recovery difference between the two vulcanizates with different styrene contents was larger for the carbon black-filled vulcanizates than for the silica-filled ones. The experimental results were explained with the glass transition temperature and modulus.

Study on the Physicochemical Properties of Crosslinked Poly(Styrene-Butadiene-Styrene) Block Copolymers Prepared by Radiation (방사선으로 제조된 가교 구조의 Poly(Styrene-Butadiene-Styrene) 블록 공중합체 특성에 관한 연구)

  • Lee, Sun-Young;Song, Ju-Myung;Sohn, Joon-Yong;Shin, Junhwa
    • Journal of Radiation Industry
    • /
    • v.6 no.2
    • /
    • pp.171-176
    • /
    • 2012
  • In this study, a crosslinked poly(styrene-butadiene-styrene) [SBS] block copolymers were prepared by using gamma ray irradiation method. The effects of various radiation doses on the degree of crosslinking, thermo property, and morphology of crosslinked SBS block copolymer were investigated. The degree of crosslinking of crosslinked SBS block copolymers were measured by gel-fraction and FT-IR. It was found that the degree of crosslinking of crosslinked SBS block copolymers increases with increase of the irradiation dose while the TGA result shows that the initial degradation temperature of irradiated SBS block copolymer was shifted to lower temperature with increasing irradiation dose. These results indicate that degradation reaction also occurs when SBS block copolymer is exposed to gamma ray irradiation for crosslinking reaction. The SAXS and FE-SEM results indicate that the phase separation of the styrene block and butadiene block was reduced with increasing irradiation dose.

Floating Gate Organic Memory Device with Plasma Polymerized Styrene Thin Film as the Memory Layer (플라즈마 중합된 Styrene 박막을 터널링층으로 활용한 부동게이트형 유기메모리 소자)

  • Kim, Heesung;Lee, Boongjoo;Lee, Sunwoo;Shin, Paikkyun
    • Journal of the Korean Vacuum Society
    • /
    • v.22 no.3
    • /
    • pp.131-137
    • /
    • 2013
  • The thin insulator films for organic memory device were made by the plasma polymerization method using the styrene monomer which was not the wet process but the dry process. For the formation of stable plasma, we make an effort for controlling the monomer with bubbler and circulator system. The thickness of plasma polymerized styrene insulator layer was 430 nm, the thickness of the Au memory layer was 7 nm thickness of plasma polymerized styrene tunneling layer was 30, 60 nm, the thickness of pentacene active layer was 40 nm, the thickness of source and drain electrodes were 50 nm. The I-V characteristics of fabricated memory device got the hysteresis voltage of 45 V at 40/-40 V double sweep measuring conditions. If it compared with the results of previous paper which was the organic memory with the plasma polymerized MMA insulation thin film, this result was greater than 18 V, the improving ratio is 60%. From the paper, styrene indicated a good charge trapping characteristics better than MMA. In the future, we expect to make the organic memory device with plasma polymerized styrene as the memory thin film.

The Removal of Styrene using Immobilized Microorganisms in Hydrogel Beads (미생물 고정화 복합고분자담체를 이용한 Styrene 제거)

  • Song, Ji-Hyeon;Ham, Eun-Yi
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.28 no.6
    • /
    • pp.648-653
    • /
    • 2006
  • As an alternative for the traditional materials packed in biofilters treating gaseous VOCs, a novel packing material has been developed and tested. In the packing material(named as Hydrogel Bead, HB), pollutant-degrading microorganisms were immobilized in hydrogel consisted of alginate, polyvinyl alcohol(PVA), and powdered activated carbon. A closed-bottle study showed that the HB rapidly removed gaseous styrene without the losses of adsorption and biodegradation capacity. Biofilter column experiments using the HBs also demonstrated that greater than 95% of removal efficiencies were found at an inlet styrene loading rate of $245g/m^3/hr$, which was higher biofilter performance than other elimination capacity reported earlier. Furthermore, when the inlet styrene concentration increased stepwise, the adsorption played an important role in overall styrene removals. The absorbed styrene was found to be biodegraded in the following low inlet loading condition. Consequently, the new HB material is able to successfully minimize the drawbacks of activated carbon(necessity of regeneration) and biological processes(low removal capacity at dynamic loading conditions), and maximize the overall performance of biofilter systems treating VOCs.

Production of Enantiopure Styrene Oxide by Recombinant Pichia pastoris carrying Double Expression cassette of Epoxide Hydrolase Gene (에폭사이드 가수분해효소 유전자의 double expression cassette 재조합 Pichia pastoris를 이용한 enantiopure styrene oxide의 제조)

  • Kim, Hee-Sook
    • Journal of Life Science
    • /
    • v.18 no.1
    • /
    • pp.136-142
    • /
    • 2008
  • A recombinant Pichia pastoris carrying double expression cassette of Rhodotorula glutinis epoxide hydrolase(RgEH) gene was developed and used for preparing enantiopure (S)-styrene oxide from racemic mixture of styrene oxide. BglII restriction site of original RgEH gene (pPICZ B/RgEH #2) of previous report was mutated using PCR technique for the construction of double expression cassette containing promoter ($P_{AOX1}$), EH gene and transcription terminator ($TT_{AOX1}$) in pPICZ C vector. Double expression cassette with RgEH was inserted into the chromosomal DNA of P. pastoris. $V_{max}$ ($2.2{\mu}mol\;min^{-1}mg\;dcw^{-1}$) on (R)-styrene oxide of P. pastoris with double expression cassette was about 6-fold higher than that ($0.4{\mu}mol\;min^{-1}mg\;dcw^{-1}$) of P. pastoris with single expression cassette. For the determination of the optimal condition, the effects of detergent and temperature on the enantioselective hydrolytic activity and yield of the enantiomer were investigated. When the reaction was performed at $10^{\circ}C$ for 10 min in the presence of 0.5% Tween 20, enantiopure (S)-styrene oxide with 99.9% ee was obtained as the yield 43.4 % from 20 mM racemic sustrate.

The substitution of paper cup for the PSP noodle cup (컵라면 용기의 종이컵 대체)

  • Kim, Seong-Jin
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.5 no.2
    • /
    • pp.59-62
    • /
    • 1999
  • After reported that Styrene dimer and Styrene trimer was Endocrine Disrupter, if it was a fact or not, the sales of PSP noodle cup was rapidly decreased and social responsibilities of the substitution materials development was raised. Therefore we had studied many materials like paper, pulp mold, PP injection molding, PP lamination, etc as substitution materials and selected paper cup which was safe in many sides and easy to recycle. Mainly we had checked the shape, safety, stability and recycling possibility of paper cup and secured many data which could prove them.

  • PDF

A Survey on the Status of using Styrene in Korea (스티렌의 유통.사용 실태조사)

  • Cho, Hyung-Yoel;Cho, Sung-Hyun;Kim, Eun-A;Kim, Byung-Gyu;Park, Seung-hyun;Kang, Seong-Kyu
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.18 no.4
    • /
    • pp.310-317
    • /
    • 2008
  • The objective of the survey is to define and judge exposure profiles semi-qualitative data in high risk processes using styrene. The survey was conducted on 98 factories out of 229 factories based on data from periodic working environment monitoring for styrene. Styrene is widely utilized as a raw material for PS and co-polymers such as ABS, SAN, SBR, SBL, unsaturated polyester resins(UPR) and others. An approximate breakdown of styrene's markets in Korea is PS 30%, expandable PS 17%, ABS 33%, SAN 5%, SBL 4%, SBR 3%, UPR 1% and other 7%. Although UPR accounts for 1% of total amount of styrene, workers dealing with it are exposed to very high concentrations up to 64 ppm. Especially styrene is widely used in the laminating process of fiberglass reinforced plastics(FRP) manufacturing industry. The Applications using styrene are largely classified into two sections which are applied to styrene monomer(SM) and UPR. SM is utilized for a raw material of resins, surfactant and adhesive. UPR is employed for FRP and non-FRP. For SM control targets are mixing colors and packing in the gelcoat resins manufacturing industry(MI), for UPR control targets out of works using UPR are 1) laminating in the MI of plastics, automobile parts and boats, 2) mixing and packing in the SMC/BMC MI, 3) molding and cutting in the other specific plastics MI, 4) mixing and coating in artificial marble product MI, 5) dipping in the electric motors & transformers MI, 6) molding in the button MI, 7) painting in the musical instrument MI. Findings from the study have given the information for the high risk processes and working practices so that occupational health professionals could focus on targeted workplaces to prevent occupational diseases. It is also useful to develop a control strategies and specific controls for high risk processes and facilities using styrene.