• Geomechanics and Engineering
• /
• 제34권6호
• /
• pp.649-664
• /
• 2023

Structural inertial interaction is a representative the effect of dynamic soil-foundation-structure interaction (SFSI), which leads to a relative displacement between soil and foundation, period lengthening, and damping increasing phenomena. However, for a system with a significantly heavy foundation, the dynamic inertia of the foundation influences and interacts with the structural seismic response. The structure-to-foundation mass ratio (MR) quantifies the distribution of mass between the structure and foundation for a structure on a shallow foundation. Although both systems exhibit the same vertical factor of safety (FS_v), the MR and corresponding seismic responses attributed to the structure and foundation masses may differ. This study explored the influence of MR on the permanent deformation and seismic response of soil-foundation-structure system considering SFSI via numerical simulations. Given that numerous dimensionless parameters of SFSI described its influence on the structural seismic response, the parameters, except for MR and FS_v, were fixed for the sensitivity analysis. The results demonstrated that the foundation inertia of heavier foundations induced more settlement due to sliding behavior of heavily-loaded systems. Moreover, the structural inertia of heavier structures evidently exhibited foundation rocking behavior, which results in a more elongated natural period of the structure for lightly-loaded systems.

• 한국인터넷방송통신학회논문지
• /
• 제8권3호
• /
• pp.87-92
• /
• 2008

In this paper, certain scaling functions are generated using the dyadic subband tree structure and applied to a time-hopping, pulse position modulation, ultra-wideband (TH-PPM UWB) system. Scaling functions can be obtained by iterating a lowpass filter at each level using a critically sampled dyadic tree. The performance of the TH-PPM UWB system employing scaling functions as the mono-cycle waveform is evaluated through computer simulations in a Rayleigh fading environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.519-523
• /
• 1993

In this paper, the variable structure model following control scheme is proposed for the nonlinear robot manipulator system. The proposed control system guarantees that the system state is in the sliding mode for all time. Therefore, error transient can be prescribed in advance for all time. Furthermore, overall system is globally exponentially stable. Chattering problem is reduced by the introduction of a boundary layer. Simulation results are given to show the usefulness of the proposed control scheme.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.999-1002
• /
• 1987

This paper describes the architecture and basic function of alarm system for the TDX-1A digital switching system. Also, it is shown that implemented software structure for alarm treatment employed in distributed control system TDX-1A.

• 수산경영론집
• /
• 제26권2호
• /
• pp.93-118
• /
• 1995

The import quantity of the fishing products is very rapidly increasing in the Korea. In the result, the inspection problems are caused to important issues in the fishing products import managements. The major problems of the Korean fishing products inspection are in the system side and structure side. The important improvement schemes are the changement to positive system in the system side, and the unitary in the structure side.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1177-1180
• /
• 1996

In this paper, we propose an algorithm that realizes cooperative behavior by construction of autonomous mobile robot system. Each robot is able to sense other robots and obstacles, and it has the rule of behavior to achieve the goal of the system. In this paper, to improve performance of the whole system, we use Genetic Programming based on Natural Selection. Genetic Programming's chromosome is a program of tree structure and it's major operators are crossover and mutation. We verify the effectiveness of the proposed scheme from the several examples.

• 전자공학회논문지B
• /
• 제28B권7호
• /
• pp.540-547
• /
• 1991

This paper proposes a machine in dependent automatic microcode generation system using a microtnstruction description language, MDL. The MDL, which has similar structure to C language, is a high-level microarchitecture description language. It defines the hardwaer elements and the operand selection of microoperartions. The proposed system generates microcode automatically by describing the structure information of a target microarchitectuer and accepting thebehavioral information of microoperations which are generated ad a intermediate language from HLML-C. This proposed system is implemented with C language and YACC on a SUN workstation (4.3 BSD).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.678-682
• /
• 1988

Current substation SCADA system has only one control center where two or three operaters monitor and control more than 40 substations spreaded far and wide. The scope of this system is too wide to cope with the concurrent multiple accidents in electric network by the typhoon and large mow. This paper describes the method to organize the optimal structure of substation SCADA system using remote console and small scale control center.

• Bulletin of the Korean Chemical Society
• /
• 제26권2호
• /
• pp.334-336
• /
• 2005

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.348-354
• /
• 2003

This study outlines the analysis of toggle system and the vibration control performance when the toggle-rotational inertia damper system was applied to a structure. Numerical analysis shows that the relative displacement of the structure can be amplified by amplification mechanism of the toggle system and the capacity of the damper can be reduced without the loss of vibration control performance. It is also observed that vibration control effects is caused by the increase of equivalent mass due to the rotational inertia of damper.