• Korean Journal of Ecology and Environment
• /
• v.37 no.4 s.109
• /
• pp.400-405
• /
• 2004

Since a large bank-protection works project was undertaken during winter in the middle reaches of the Chikuma, the riverbed structure was drastically altered. In order to assess the short-term impact of bank-protection works on the abundance Pattern of Stenopsyche marmorata (Trichoptera) from spring to early summer, we conducted an investigation on the capture of adults using light traps before and after construction work. The patterns of the daily capture of S. marmorata and the Namely, after construction, the daily catch of adult numbers increased only slightly during the investigation periods. This suggested that the age structure of the S. marmorata larval population had changed in the construction area. Our data suggest that bank-protection projects impact the abundance pattern of adult caddisflies in the river ecosystem.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.3
• /
• pp.150-158
• /
• 2007

As higher and bigger buildings, steel structure is so for a basic building structure. Quality management of the steel frame work is started from pre plan phase. And classification and relation of works is very important in quality management. The purpose of this study is developing a quality management model for the better quality management in a steel frame work. This model consider a interrelationship of works and $input^{\circ}{\S}utput$ information, and based on the actual condition of current quality management.

• Health Policy and Management
• /
• v.12 no.4
• /
• pp.34-55
• /
• 2002

In this study, the impact of organizational culture on the quality of social work services in hospitals were empirically analysed. A mailed questionnaire survey was conducted between February 19 and April 10, 2001. A sample of total 70 hospitals, including general hospitals with one social worker at least and single-department hospital with two social workers or more, were identified nationwide through the registry of Korean Association of Medical Social Workers and Korean Association of Hospitals. According to coping strategy and reacting pattern with the environmental changes, four types of organizational culture in each hospital, classified as group culture, developmental culture, hierarchial culture, and rational culture, were adopted for the independent variables. Three dimensional aspects of quality of social work service - structure, process, and outcome were selected as dependent variables in this study. Also the quality of social work service was distributed into provider-perceiving quality and consumer-perceiving quality The major findings were as following in summary; First, most social workers reported that the characteristic of culture in their hospitals are group culture the first, hierarchial culture the second, developmental culture the third, and rational culture finally in order of comparing the level of quality perceived between social worker's recognition. Second, service provider and consumer, The provider-perceiving quality showed less score than that of consumer, especially the lowest was the score of quality of outcome perceived by provider. Third, according to the types of organizational culture, there were significantly different levels of quality in total social work services, structure dimension and process dimension. The quality of outcome dimension did not show significant differences among the type of organizational culture. Finally, the most influential variables to the quality of social work service ice proved departmental form of social work unit, leader of social work unit, and developmental culture of hospital To assure quality services, accordingly, social work unit in hospital is required to be organized as a single unit, that means to be an independent department of which qualified social worker is supposed to control the unit. It is strongly recommended to develop leadership for the leaders of social work unit.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.05a
• /
• pp.343-354
• /
• 2004

A Project planning is one of the most important processes that determines success and failure of the project. Scope management for project planning is also essential job in system integration project. However project planning is very difficult because lots of factor and their relationships should be considered. Therefore project planning of SI project has been done by project manager s own knowledge and experiences. It is necessary to develop an algorithm of WBS(Work Breakdown Structure) identification & document selection along to project's specificity in project management system using AI technique. This study also present method (ODW model) to cope with the limitations of the existing study that has uniformly customizing the methodology by only project complexity. We propose PPSM(Project planning support module) that apply Rule for determination of route map and document level, and CBR for WBS identification.

• Journal of Korean Academy of Nursing Administration
• /
• v.18 no.1
• /
• pp.87-95
• /
• 2012

Purpose: This study was conducted to explore the perspectives of gender and role in the family for nurses' work-family balance. Method: Data were collected through in-depth interviews with 14 married nurses having children, who were selected through convenience sampling and purposive sampling from November 1, 2011 to January 20, 2012. The data were analyzed using qualitative thematic analysis. Results: The common themes resulted from data analysis included following traditional gender roles, giving up any expectation of spouse's role, coordinating the division of family roles, and refusing to stick to gender roles. The age of nurse, family background of husband, and social-economic contexts were essential to explain the couple dynamics. Conclusions: Nurses who received private family support were stably leading a work-family balance, yet unable to change the gender structure of spouse for the work-family balance. On the other hand, young nurses who were unable to get any support, had a tendency of cooperating with their spouses and adopting more negotiable and pragmatic approach to work-family balance.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.2
• /
• pp.129-138
• /
• 2011

Construction methods for underground structure are classified as bottom-up, up-up, and top-down methods depending on the procedure of construction related to a superstructure. In top-down construction methods, building's main structure is built from the ground level downwards by sequentially alternating ground excavation and structure construction. In the mean time, the main structure is also used as supporting structure for earth-retaining wall, which results in the increased stability of the earth-retaining wall due to the minimized deformation in adjacent structures and surrounding grounds. In addition, the method makes it easy to secure a field for construction work in the downtown area by using each floor slabs as working spaces. However top-down construction method is often avoided since an excavation under the slab has low efficiency and difficult environment for work, and high cost compared with earth anchor method. This paper proposes a combined construction method where semi-open cut is selected as excavation work, slurry as earth -retaining wall and CWS as top-down construction method. In the case study targeted for an actual construction project, the proposed method is compared with existing top-down construction method in terms of economic feasibility, construction period and work efficiency. The proposed construction method results in increased work efficiency in the transportation of earth and sand, and steel frame erection, better quality management in PHD construction, and reduced construction period.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.801-804
• /
• 2007

Development of construction project management information system is accelerated because information management system has become more important by recent complicated and large-sized construction industry. There are many problems to operate PMIS efficiently because no standardized WBS exist in current. This study has identified the problems of WBS in building construction of multi-family house projects with 4 public and private organizations by interviews and compared each WBS. From those facts, this research presents the integrated WBS and the improved application form in PMIS.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.235-238
• /
• 2002

The successful completion of a construction project requires a thorough understanding of all stages and phases of the project, and enhanced through integration of design and construction during the pre-construction stage. Constructability is a major factor in measuring the success or failure of construction project. During the pre-construction stage, lack of construction knowledge integration in the planning and design process is a major factor that leads to constructability problems during the construction stage. this study is to find out such problems based on interview and questionnaire in the structure's work of High-Rise Office Buildings. The objective of this study is to Identify Impact aspect of the structure's work of High-Rise Office Buildings.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.30-37
• /
• 2020

In the building construction, the steel-frame work occupies an important position in terms of structure, cost and quality. Especially in Japan, steel frames have traditionally been the main structure of many buildings. For steel-frame works in such positions, this paper investigates an existing steel fabricator to clarify the actual conditions of design decision making process and management method in steel production process. This study focuses on a steel fabricator (Company M in the following sentences), whose main market is Japan and which has facilities in Thailand, China, and Japan. Company M uses QR codes to control the production status of products, and exchanges all information between inside and outside the company via specialized departments in the form of documents. The authors have already analyzed the relationship between production lead time and defect rate based on actual project data at Architectural Institute of Japan in 2016. In 2019, we expressed the process from the confirmation of the design information of the current steel frame to the production by WBS, and clarified the relationship between the production lead time and steel frame product quality structurally. In this paper, the authors reoport the progress of the survey conducted so far, the positioning of the collected data, and the future survey policy.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.3
• /
• pp.156-161
• /
• 2015

In this paper, we present simulation results obtained using SILVACO TCAD tools for a 3-D silicon on insulator (SOI) n-FinFET structure with a gate length of 8 nm at 300K. The effects of variations of the device’s key electrical parameters, such as threshold voltage, subthreshold slope, transconductance, drain induced barrier lowering, oncurrent, leakage current and on/off current ratio are presented and analyzed. We will also describe some simulation results related to the influence of the gate work function variations on the considered structure. These variations have a direct impact on the electrical device characteristics. The results show that the threshold voltage decreases when we reduce the gate metal work function Φ_m. As a consequence, the behavior of the leakage current improves with increased Φ_m. Therefore, the short channel effects in real 3-D FinFET structures can reasonably be controlled and improved by proper adjustment of the gate metal work function.